Sustaining a swimming pool requires common consideration to numerous parts, together with the underwater lighting. Whether or not the necessity arises on account of a burnt-out bulb, electrical points, or a need to improve the ambiance, altering a swimming pool gentle is a process that may be achieved with correct security precautions and a step-by-step strategy. By following the rules outlined beneath, you possibly can safely and successfully swap out an previous pool gentle for a brand new one, guaranteeing optimum illumination on your aquatic oasis.
Earlier than embarking on the duty, it’s important to prioritize security. Keep in mind to show off the ability provide to the pool on the principal electrical panel to forestall any potential electrical hazards. As soon as the ability is disconnected, you possibly can collect the required instruments for the job, comparable to a screwdriver, pliers, and presumably a ladder or step stool if wanted to achieve the underwater gentle fixture.
Figuring out the Sort of Pool Gentle
Earlier than you possibly can change a swimming pool gentle, you’ll want to determine the kind of gentle you’ve. There are a number of various kinds of pool lights, and every kind has its personal distinctive traits and set up necessities.
The commonest kinds of pool lights embody:
- Incandescent lights: Incandescent lights are essentially the most conventional kind of pool gentle. They use a filament that glows when an electrical present passes by it. Incandescent lights are comparatively cheap and simple to put in, however they aren’t as energy-efficient as different kinds of lights.
- Fluorescent lights: Fluorescent lights use a fluorescent coating on the within of a glass tube to supply gentle. Fluorescent lights are extra energy-efficient than incandescent lights, however they are often dearer to put in. In addition they are inclined to have a shorter lifespan than incandescent lights.
- LED lights: LED lights use light-emitting diodes (LEDs) to supply gentle. LEDs are very energy-efficient and have an extended lifespan. They’re additionally extra resistant to break than different kinds of lights. Nevertheless, LED lights will be dearer to put in.
You possibly can normally determine the kind of pool gentle you’ve by wanting on the housing of the sunshine. The housing will sometimes be product of plastic or metallic, and it’ll have a label that signifies the kind of gentle inside. If you happen to can’t discover a label, you possibly can attempt to determine the kind of gentle by its look. Incandescent lights have a filament that’s seen by the glass bulb. Fluorescent lights have an extended, skinny tube that’s coated with a fluorescent coating. LED lights have a small, spherical LED that’s mounted on a circuit board.
After getting recognized the kind of pool gentle you’ve, you possibly can observe the directions within the subsequent part to vary the sunshine.
Making ready for the Alternative
Earlier than you dive into the water to vary the pool gentle, it is essential to take the time for correct preparation. Here is an in depth information to make sure a clean and secure substitute:
1. Energy Down and Drain the Pool
For security causes, it is crucial to show off the ability to the pool on the circuit breaker or fuse field. Then, drain the water degree within the pool beneath the extent of the sunshine fixture to keep away from electrical hazards.
2. Find and Take away the Fixture
To find the pool gentle, search for a submersible fixture housing within the pool wall or flooring. Relying on the kind of gentle fixture, it’s possible you’ll have to unscrew a hoop or use a flathead screwdriver to take away the faceplate. As soon as the faceplate is eliminated, you will have entry to the bulb or LED meeting inside.
| Fixture Sort | Removing Technique |
|---|---|
| Screw-on Ring | Unscrew the ring counterclockwise |
| Recessed Faceplate | Insert a flathead screwdriver into the slots and pry the faceplate open |
| Flush-mounted | Pull or twist the sunshine fixture to detach it from the housing |
3. Disconnect the Wires
As soon as the fixture is eliminated, disconnect the wires resulting in the sunshine bulb or LED meeting. Sometimes, there will probably be two wires, a sizzling wire and a impartial wire. Fastidiously untwist the wire nuts and label every wire with tape or a marker to help reconnection throughout set up.
Shutting Off Electrical Energy
1. Find the Circuit Breaker Panel
Establish {the electrical} panel that controls the swimming pool tools, sometimes positioned within the storage, basement, or outside.
2. Shut Off the Fundamental Circuit Breaker
Flip the primary circuit breaker to the “OFF” place. This may minimize off energy to your entire pool system, together with the pool gentle.
3. Establish the Pool Gentle Circuit Breaker
Find the circuit breaker labeled “Pool Gentle” or “Underwater Lighting.” Flip this breaker to the “OFF” place to isolate energy to the pool gentle. If there isn’t any particular breaker labeled for the pool gentle, consult with the panel’s labeling or seek the advice of with a professional electrician to determine the proper breaker.
To additional guarantee security, contemplate the next further steps:
- If potential, flip off the pool pump to forestall water from circulating whereas the sunshine is being changed.
- Use a non-contact voltage tester to substantiate that energy to the pool gentle is totally disconnected earlier than continuing.
- Create an indication or barrier across the pool space to alert others that the ability is off and the pool shouldn’t be used.
Draining the Pool Water
Earlier than you possibly can change a swimming pool gentle, you’ll want to drain the pool water. This may increasingly seem to be a frightening process, nevertheless it’s truly fairly easy.
- Flip off the ability to the pool pump.
- Connect a backyard hose to the drain plug on the backside of the pool.
- Open the valve on the drain plug to start out draining the water.
- As soon as the water has drained, you will have to take away the sunshine fixture from the pool wall. On some fixtures, the sunshine fixture will be unscrewed from its socket. On different fixtures, you will have to take away the screws that maintain the sunshine in place.
- Disconnect {the electrical} wires from the sunshine fixture.
- Be sure you substitute the sunshine fixture with a brand new one that’s suitable along with your pool. Make {the electrical} connections and safe every thing in place.
- Activate the ability to the pool pump and refill the pool with water. Activate the sunshine to verify it is working correctly.
Eradicating the Gentle Fixture
As soon as you’ve got drained the pool and eliminated the bolts holding the sunshine in place, it is time to take away the sunshine fixture. This is usually a bit tough, as the sunshine is often sealed in place with a rubber gasket. Here is easy methods to do it with out damaging the sunshine or the pool:
1. Grip the sunshine fixture firmly with each arms.
2. Gently twist the sunshine counterclockwise to interrupt the seal.
3. Pull the sunshine straight out of the housing.
4. Examine the rubber gasket for any injury.
5. If the gasket is broken, substitute it with a brand new one.
| Step | Particulars |
|---|---|
| 1 | Find the 2 bolts that maintain the sunshine in place. |
| 2 | Utilizing a wrench, rigorously take away the bolts. |
| 3 | As soon as the bolts are eliminated, gently pull the sunshine straight out of the housing. |
| 4 | Examine the rubber gasket for any injury. |
| 5 | If the gasket is broken, substitute it with a brand new one. |
| 6 | Insert the brand new gasket into the housing. |
| 7 | Push the sunshine again into the housing till it’s firmly seated. |
| 8 | Tighten the bolts to safe the sunshine in place. |
Changing the Bulb or LEDs
Changing the bulb or LEDs in your swimming pool gentle is a comparatively easy process that may be accomplished in a number of steps. First, you’ll need to assemble the next supplies:
- New gentle bulb or LEDs
- Screwdriver
- Wire strippers
- Electrical tape
- Waterproof sealant
After getting gathered your supplies, you possibly can start the method of changing the sunshine bulb or LEDs.
1. **Flip off the ability to the pool gentle.** That is sometimes completed on the circuit breaker panel.
2. **Take away the lens from the sunshine housing.** That is normally completed by unscrewing the screws that maintain the lens in place.
3. **Disconnect the wires from the sunshine bulb or LEDs.** Use the wire strippers to chop the wires about 6 inches from the sunshine bulb or LEDs.
4. **Strip the insulation from the ends of the wires.** This may mean you can join the wires to the brand new gentle bulb or LEDs.
5. **Join the wires to the brand new gentle bulb or LEDs.** Twist the ends of the wires collectively and wrap them with electrical tape.
6. **Reinstall the lens on the sunshine housing.** Tighten the screws to safe the lens in place.
7. **Activate the ability to the pool gentle.** The brand new gentle bulb or LEDs ought to now be working.
Reinstalling the Gentle Fixture
Now that the wires are linked, it is time to reinstall the sunshine fixture. Here is easy methods to do it:
1. Line up the fixture: Fastidiously align the sunshine fixture with the opening within the pool wall.
2. Screw within the bolts: Utilizing the bolts that got here with the fixture, screw them into the holes within the pool wall. Tighten the bolts securely, however do not overtighten them.
3. Verify the alignment: As soon as the bolts are tightened, verify to ensure that the sunshine fixture is correctly aligned and seated within the opening.
4. Set up the gasket: If there’s a gasket included with the fixture, place it over the bolts to create a watertight seal.
5. Tighten the nuts: Use the nuts to safe the fixture to the bolts. Tighten them till they’re cosy, however do not overtighten them.
6. Join the wires to the fixture: Join the wires from the pool to the corresponding terminals on the sunshine fixture. Guarantee that the connections are tight and safe.
7. Take a look at the sunshine: As soon as the wires are linked, activate the pool’s energy and take a look at the sunshine to ensure that it is working correctly. If the sunshine does not activate, verify the wiring to ensure that it is linked accurately.
Step 6: Reattaching the Fixture
After changing the bulb, rigorously information the fixture again into its housing. Push it gently till it suits securely. Guarantee all screws are tightened to carry the fixture in place.
Step 7: Restoring Energy
Restoring Energy and Testing
Turning on the Circuit Breaker
As soon as the fixture is reattached, return to the circuit breaker panel and change the breaker again on. The facility ought to be restored to the pool gentle.
Testing the Gentle
- Return to the pool and enter the water.
- Activate the sunshine change for the pool.
- The sunshine ought to illuminate the pool space.
- If the sunshine doesn’t come on, verify the next:
- Verify the bulb once more to make sure it is correctly put in.
- Verify the wiring connections to verify they’re safe.
- If the problem persists, contact an electrician for additional help.
Step 8: Optionally available: Changing the Lens
Whereas the fixture is disconnected, you too can substitute the lens if it is cracked or scratched. Here is how:
| Step 1: | Take away the screws holding the lens in place. |
|---|---|
| Step 2: | Gently pull out the previous lens. |
| Step 3: | Slide the brand new lens into place. |
| Step 4: | Tighten the screws to safe the lens. |
Troubleshooting Widespread Points
If you happen to encounter any points whereas changing your swimming pool gentle, listed here are some widespread issues and their potential options:
1. The sunshine does not activate when the change is flipped
Verify if the breaker for the pool is tripped or if there’s a blown fuse. Verify the wiring connections to make sure they’re safe and never broken.
2. The sunshine sparkles or dims intermittently
Free wiring or water within the gentle fixture may cause flickering or dimming. Tighten any unfastened connections and verify the gasket across the gentle fixture for leaks.
3. The sunshine will not be as vivid as earlier than
Over time, the bulb can grow to be much less environment friendly. Exchange the bulb with a brand new one of many identical wattage and voltage.
4. There may be water inside the sunshine fixture
Verify the gasket across the gentle fixture for leaks. Exchange the gasket whether it is broken or worn and reseal the sunshine fixture with silicone caulk.
5. The sunshine is unfastened or rattling
Tighten the bolts or screws that safe the sunshine fixture to the pool wall or area of interest.
6. The sunshine is simply too sizzling to the touch
Flip off the pool gentle and let it quiet down earlier than dealing with it. Verify if the bulb is overheating or if the wiring is broken.
7. The sunshine is emitting an odd odor
Flip off the pool gentle and disconnect it from the ability supply instantly. The odor may point out a burning wire or overheating parts.
8. The sunshine retains tripping the breaker
There could also be a brief circuit or overload within the wiring. Verify the wiring and substitute any broken parts. Contact a licensed electrician if obligatory.
9. The bulb dimension will not be suitable with the sunshine fixture
Consult with the specs of the sunshine fixture to find out the proper bulb dimension. Putting in a bulb that’s too massive or small may cause the sunshine to malfunction or overheat.
Security Concerns
Earlier than trying to vary a swimming pool gentle, it’s essential to prioritize security. Listed below are 10 important security precautions to look at:
How To Change A Swimming Pool Gentle
Have you ever ever puzzled easy methods to change a swimming pool gentle? It is not as tough as you may suppose. With a number of easy instruments and a bit time, you are able to do it your self and avoid wasting cash. Listed below are the steps on easy methods to change a swimming pool gentle:
- Flip off the ability to the pool on the circuit breaker.
- Take away the screws that maintain the sunshine fixture in place and thoroughly carry it out of the pool.
- Disconnect the wires from the previous gentle fixture and join them to the brand new gentle fixture.
- Place the brand new gentle fixture again into the pool and screw it into place.
- Flip the ability again on on the circuit breaker.
Folks Additionally Ask
How typically ought to I modify my swimming pool gentle?
Each 3-5 years
The common lifespan of a swimming pool gentle is 3-5 years. Nevertheless, this could fluctuate relying on the kind of gentle, the standard of the water, and the way typically the sunshine is used.
Can I modify the bulb in my swimming pool gentle myself?
Sure
Sure, you possibly can change the bulb in your swimming pool gentle your self. Nevertheless, it is very important flip off the ability to the pool on the circuit breaker earlier than doing so.
How a lot does it price to vary a swimming pool gentle?
$100-$500
The fee to vary a swimming pool gentle can fluctuate relying on the kind of gentle and the placement of the pool. Nevertheless, the typical price is between $100 and $500.
