In case your automobile’s cigarette lighter has stopped working, it may be an actual inconvenience. However don’t fret, changing it’s a comparatively simple job that you are able to do your self in only a few minutes. On this article, we’ll stroll you thru the step-by-step strategy of the right way to change a cigarette lighter in a automobile.
First, you will want to assemble a couple of instruments. You may want a flathead screwdriver, a Phillips screwdriver, and a brand new cigarette lighter. Upon getting your instruments, you can begin by eradicating the outdated cigarette lighter. To do that, insert the flathead screwdriver into the slot on the facet of the lighter and pry it out. As soon as the lighter is out, you possibly can disconnect the wires by unscrewing the Phillips screws that maintain them in place.
Subsequent, you will want to put in the brand new cigarette lighter. To do that, merely join the wires to the brand new lighter and screw them in place. Then, insert the lighter into the opening and push it till it clicks into place. Lastly, take a look at the lighter to verify it is working correctly.
Finding the Cigarette Lighter Meeting
Earlier than embarking on the duty of changing your automobile’s cigarette lighter, it is essential to find its meeting. This may occasionally differ primarily based in your car’s make and mannequin, however here is a basic information that can assist you discover it:
1. Examine the Heart Console:
In lots of automobiles, the cigarette lighter meeting is located on the middle console, often inside simple attain of the motive force and entrance passenger. It might be hid behind a small door or panel that may be opened by urgent on it or utilizing a instrument like a screwdriver. As soon as the quilt is eliminated, you must see the cigarette lighter itself, typically accompanied by an influence outlet.
2. Verify the Dashboard:
If the middle console does not home the cigarette lighter meeting, look at your dashboard. It might be situated in a small recess or panel close to the instrument cluster or infotainment system. Search for a round opening that resembles the scale and form of a cigarette lighter.
3. Discover different Storage Areas:
In some autos, the cigarette lighter meeting will be present in much less apparent places, such because the glove compartment, ashtray, and even the trunk. Seek the advice of your car’s proprietor’s guide or search on-line for model-specific directions to slim down its potential location.
| Automobile Sort | Widespread Cigarette Lighter Places |
|---|---|
| Sedans & Coupes | Heart console, dashboard |
| SUVs & Crossovers | Heart console, dashboard, glove compartment |
| Vehicles | Dashboard, heart console, ashtray |
Security Precautions
Earlier than starting any electrical work in your car, it’s essential to observe these security precautions to make sure your security and stop any harm to your automobile:
- Park your automobile on a flat, steady floor and interact the parking brake.
- Flip off the engine and take away the keys from the ignition.
- Disconnect the destructive battery terminal to stop any electrical shocks or brief circuits.
- Put on applicable security gear, resembling gloves and security glasses, to guard your self from any potential hazards.
- Be certain that your work space is well-ventilated to stop the buildup of dangerous fumes.
Disconnection of Battery
Disconnecting the battery is a essential step earlier than engaged on any electrical parts in your automobile. Here is an in depth information on the right way to do it safely:
- Find the battery, usually underneath the hood of your automobile.
- Establish the destructive (-) and constructive (+) terminals on the battery.
- Utilizing a wrench or socket, loosen the nut on the destructive terminal and thoroughly take away it.
- Examine the situation of the battery terminals and clear any corrosion or buildup.
- As soon as the destructive terminal is disconnected, you possibly can proceed to work on the cigarette lighter.
| Device | Description |
|---|---|
| Wrench or socket | Used to loosen the nut on the battery terminal. |
| Gloves | Protects your fingers from any potential hazards. |
| Security glasses | Protects your eyes from flying particles or splashes. |
Eradicating the Cigarette Lighter Trim Panel
Eradicating the cigarette lighter trim panel is a comparatively easy job that may be accomplished in a couple of minutes with the best instruments. Listed here are the steps concerned:
1. Collect Your Instruments
You will have a couple of instruments to take away the cigarette lighter trim panel, together with:
- Small flat-head screwdriver
- Phillips-head screwdriver
- Trim panel removing instrument
2. Find the Trim Panel Screws
The cigarette lighter trim panel is often held in place by two screws, one on either side. Find the screws and take away them utilizing the suitable screwdriver.
3. Pry the Trim Panel Free
As soon as the screws are eliminated, you possibly can rigorously pry the trim panel unfastened utilizing the trim panel removing instrument. Insert the instrument into the seam between the trim panel and the dashboard and gently pry till the panel pops unfastened. Watch out to not harm the panel or the dashboard.
| Steps | Particulars |
|---|---|
| Insert the instrument into the seam between the trim panel and the dashboard. | Use a trim panel removing instrument or a small flat-head screwdriver. |
| Gently pry till the panel pops unfastened. | Watch out to not harm the panel or the dashboard. |
As soon as the trim panel is unfastened, you possibly can pull it away from the dashboard and disconnect any electrical connectors that could be connected to it.
Accessing and Disconnecting the Cigarette Lighter
Start by finding the fuse panel, often discovered underneath the dashboard or within the engine compartment. Seek the advice of your car’s proprietor’s guide for the precise location. As soon as you’ve got recognized the fuse panel, use a fuse puller or needle-nose pliers to softly take away the fuse related to the cigarette lighter. Be cautious to not contact the metallic contacts.
Subsequent, take away the trim across the cigarette lighter utilizing a flat-head screwdriver or trim removing instrument. Fastidiously elevate the trim piece off to reveal the cigarette lighter meeting.
With the cigarette lighter meeting uncovered, find the wires related to the again of the cigarette lighter. These wires are usually held in place by plastic clips or connectors. Use a set of needle-nose pliers or a small screwdriver to softly launch the wires from these clips.
Lastly, grip the cigarette lighter firmly and pull it straight out of the sprint. Be conscious of any wires which will nonetheless be connected. As soon as the cigarette lighter is eliminated, you possibly can proceed to exchange it with a brand new one.
Changing the Cigarette Lighter
| Instruments Required |
|---|
| New cigarette lighter |
| Trim removing instrument or flat-head screwdriver |
| Fuse puller or needle-nose pliers |
| Needle-nose pliers or small screwdriver |
| Electrical tape (non-compulsory) |
Insert the brand new cigarette lighter into the sprint, guaranteeing it matches snugly. Reattach the wires to the again of the cigarette lighter, utilizing the plastic clips or connectors. As soon as the wires are securely related, push the cigarette lighter meeting again into the sprint till it snaps into place.
Exchange the trim across the cigarette lighter by aligning the tabs on the trim piece with the corresponding slots on the sprint. Press firmly on the trim piece till it snaps into place.
Lastly, reinsert the fuse into the fuse panel. Verify the cigarette lighter to make sure it’s functioning appropriately by plugging in an influence wire or adapter.
Eradicating the Previous Cigarette Lighter Factor
The outdated cigarette lighter ingredient is held in place by a small spring clip. To take away it, you will want to make use of a small screwdriver or a pair of needle-nose pliers. First, insert the screwdriver or pliers into the small gap on the facet of the lighter. Then, gently pry the clip open and take away the outdated ingredient.
Watch out to not harm the clip when eradicating the outdated ingredient. If the clip is broken, it should have to be changed earlier than you possibly can set up the brand new ingredient.
Listed here are some further ideas for eradicating the outdated cigarette lighter ingredient:
- Use a flashlight to get a greater view of the clip.
- Be affected person and do not power the clip open.
- If the clip is caught, you possibly can attempt utilizing a small quantity of lubricant.
| Step | Motion |
|---|---|
| 1 | Find the small gap on the facet of the lighter. |
| 2 | Insert the screwdriver or pliers into the opening. |
| 3 | Gently pry the clip open. |
| 4 | Take away the outdated ingredient. |
Putting in the New Cigarette Lighter Factor
Upon getting eliminated the outdated cigarette lighter ingredient, it is time to set up the brand new one. This can be a comparatively simple course of, however there are some things to bear in mind.
First, ensure that the brand new ingredient is the proper measurement and kind in your car. There are two primary sorts of cigarette lighter components: push-in and screw-in. Push-in components merely match into the socket, whereas screw-in components require you to show them into place.
Upon getting the proper ingredient, observe these steps to put in it:
- Insert the brand new ingredient into the socket.
- If the ingredient is a push-in kind, merely push it in till it’s flush with the socket.
- If the ingredient is a screw-in kind, flip it clockwise till it’s tight.
- Reinstall the cigarette lighter meeting into the dashboard.
- Take a look at the brand new cigarette lighter to verify it’s working correctly.
Here’s a desk summarizing the steps for putting in a brand new cigarette lighter ingredient:
| Step | Description |
|---|---|
| 1 | Insert the brand new ingredient into the socket. |
| 2 | If the ingredient is a push-in kind, merely push it in till it’s flush with the socket. |
| 3 | If the ingredient is a screw-in kind, flip it clockwise till it’s tight. |
| 4 | Reinstall the cigarette lighter meeting into the dashboard. |
| 5 | Take a look at the brand new cigarette lighter to verify it’s working correctly. |
Reconnecting the Cigarette Lighter
With the brand new cigarette lighter in place, it is time to reconnect it to the automobile’s electrical system. Observe these steps:
- Find {the electrical} connector on the again of the cigarette lighter.
- Align the connector with the corresponding socket on the automobile’s wiring harness.
- Press the connector into the socket till it clicks securely into place.
- Wrap {the electrical} tape across the base of the connector to safe it additional.
- Join the bottom wire to the automobile’s chassis. The bottom wire is often black or brown and needs to be connected to a metallic floor utilizing a screw or bolt.
- Exchange the fuse within the automobile’s fuse field that’s related to the cigarette lighter.
- Take a look at the cigarette lighter by inserting a 12-volt mild bulb or a cellphone charger to see whether it is functioning appropriately.
Supplies Wanted
- Substitute cigarette lighter
- Phillips screwdriver
- Trim removing instrument
- New battery (if essential)
Process
Removing of the Trim Panel
- Find the trim panel surrounding the cigarette lighter.
- Use a trim removing instrument to rigorously pry the trim panel away from the dashboard.
- Disconnect any electrical connectors connected to the trim panel.
Removing of the Cigarette Lighter
- Use a Phillips screwdriver to unscrew the 2 screws holding the cigarette lighter meeting in place.
- Disconnect {the electrical} connector from the cigarette lighter.
- Pull the cigarette lighter meeting out of the dashboard.
Set up of the New Cigarette Lighter
- Join {the electrical} connector to the brand new cigarette lighter.
- Insert the brand new cigarette lighter meeting into the dashboard.
- Screw within the two screws to safe the meeting.
Battery Substitute (Elective)
- Find the battery compartment on the underside of the cigarette lighter.
- Use a small screwdriver to take away the battery compartment cowl.
- Exchange the outdated battery with a brand new one of many similar measurement and kind.
- Exchange the battery compartment cowl.
Reassembly of the Trim Panel and Battery
- Reconnect any electrical connectors to the trim panel.
- Fastidiously align the trim panel with the dashboard.
- Press firmly on the trim panel till it snaps into place.
Testing the New Cigarette Lighter
- Activate the ignition.
- Insert a cigarette or different object into the cigarette lighter.
- The cigarette lighter ought to warmth up and ignite the item inside a couple of seconds.
Testing the New Cigarette Lighter
As soon as the brand new cigarette lighter is put in, it is important to check it to make sure it is working appropriately. Observe these steps:
- Flip the ignition to the “On” or “Accent” place.
- Press the cigarette lighter button and maintain it down.
- Observe if the lighter ingredient extends and glows.
- Launch the button and await the ingredient to warmth up.
- Insert a cigarette or different applicable object into the lighter.
- If the item lights up, the lighter is functioning correctly.
- If the lighter fails to ignite, verify the fuse for the lighter circuit and change it if essential.
- If the fuse will not be blown, the issue could also be with the lighter ingredient itself. Exchange the lighter ingredient and re-test.
- If the lighter nonetheless fails to work after changing the fuse and ingredient, you might want to hunt skilled help from an electrician or mechanic.
Desk: Troubleshooting Widespread Cigarette Lighter Points
| Challenge | Doable Trigger | Resolution |
|---|---|---|
| No energy | Blown fuse, unfastened connections | Verify and change fuse; tighten connections |
| Factor does not glow | Faulty ingredient, dangerous contact | Exchange ingredient; clear contacts with tremendous sandpaper |
| Factor glows however does not ignite | Low voltage, clogged burner | Verify battery voltage; clear burner with compressed air or a needle |
Changing the Cigarette Lighter
1. Collect your instruments: You may want a brand new cigarette lighter meeting, a small screwdriver or wrench, and a pair of pliers.
2. Disconnect the battery: To keep away from any electrical shocks, disconnect the destructive terminal of your automobile battery.
3. Take away the middle console: Find the screws or clips that maintain the middle console in place and take away them.
4. Entry the cigarette lighter meeting: As soon as the console is eliminated, you must see the cigarette lighter meeting.
5. Disconnect {the electrical} connections: Use pliers to softly squeeze and disconnect {the electrical} connectors from the lighter meeting.
6. Take away the outdated lighter: Use a screwdriver or wrench to loosen the screw or nut that secures the lighter meeting and take away it from the dashboard.
7. Set up the brand new lighter: Place the brand new lighter meeting into the dashboard and tighten the screw or nut.
8. Reconnect {the electrical} connections: Plug {the electrical} connectors again into the lighter meeting and ensure they’re securely related.
9. Reassemble the middle console: Put the middle console again into place and fasten it with the screws or clips you eliminated earlier.
10. Reconnect the battery: Join the destructive terminal of your automobile battery to finish the alternative course of.
Further Ideas for Troubleshooting
1. Verify the fuse: If the brand new lighter does not work, verify the fuse related to the cigarette lighter circuit in your car’s fuse field. Exchange the blown fuse with a brand new one of many similar amperage.
2. Clear the contacts: Use a cotton swab with rubbing alcohol to wash {the electrical} contacts on the lighter meeting and {the electrical} connectors.
3. Take a look at the voltage: Use a multimeter to check the voltage on the electrical connectors. If there isn’t any voltage, there could also be an issue with the wiring or the ability provide.
4. Examine the socket: Study the socket of the lighter meeting for any harm or particles. Clear or restore the socket if essential.
5. Exchange the wiring harness: If all different troubleshooting steps fail, you might want to exchange all the wiring harness that connects the lighter meeting to the car’s electrical system.
Easy methods to Exchange Cigarette Lighter in Automobile
Changing a cigarette lighter in a automobile is a comparatively easy job that may be accomplished in a couple of minutes. Listed here are the steps on the right way to do it:
- Collect your instruments. You will have a brand new cigarette lighter, a flat-head screwdriver, and a pair of pliers.
- Disconnect the destructive battery terminal. This can stop any electrical shocks from occurring if you are working.
- Find the cigarette lighter. It’s often situated within the heart console or dashboard.
- Take away the outdated cigarette lighter. Use the flat-head screwdriver to pry the bezel across the lighter out. Then, use the pliers to drag the lighter out of the socket.
- Set up the brand new cigarette lighter. Insert the brand new lighter into the socket and push it in till it clicks into place. Then, change the bezel.
- Reconnect the destructive battery terminal. Begin your automobile and take a look at the brand new cigarette lighter to verify it’s working correctly.
Folks Additionally Ask
How a lot does it value to exchange a cigarette lighter in a automobile?
The price of changing a cigarette lighter in a automobile will differ relying on the make and mannequin of your car. Nevertheless, the typical value is between $20 and $50.
Can I change the cigarette lighter in my automobile myself?
Sure, you possibly can change the cigarette lighter in your automobile your self. It’s a comparatively easy job that may be accomplished in a couple of minutes.
What instruments do I want to exchange the cigarette lighter in my automobile?
You will have a brand new cigarette lighter, a flat-head screwdriver, and a pair of pliers.
