Changing the battery in a 2014 Chevy Malibu is a comparatively easy process that may be accomplished in about half-hour. Nevertheless, you will need to comply with the correct steps to keep away from any injury to the automobile or its electrical system. This information will offer you step-by-step directions on learn how to change the battery in your 2014 Chevy Malibu, making certain that the job is finished safely and effectively.
Earlier than you start, you’ll need to collect just a few instruments. These embrace a 10mm socket and wrench, a flathead screwdriver, and a brand new battery. Upon getting your whole instruments, you may start the alternative course of. First, open the hood of the automobile and find the battery. It will likely be positioned on the passenger aspect of the engine compartment. Disconnect the detrimental terminal of the battery utilizing the 10mm socket and wrench. Then, disconnect the optimistic terminal. As soon as each terminals are disconnected, you may take away the battery from the automobile. Fastidiously carry the battery out of the compartment, being cautious to not drop it.
Subsequent, you’ll need to put in the brand new battery. Place the brand new battery within the compartment and join the optimistic terminal first. Then, join the detrimental terminal. Tighten each terminals utilizing the 10mm socket and wrench. Lastly, shut the hood of the automobile and begin the engine. Examine the battery gauge to guarantee that the brand new battery is charging correctly. If every part is working accurately, you may have efficiently changed the battery in your 2014 Chevy Malibu.
Supplies and Instruments Required
Earlier than embarking on the battery alternative journey, it is essential to collect the mandatory instruments and supplies. A well-prepared software equipment will guarantee a easy and environment friendly course of.
Supplies:
- Substitute battery: Guarantee you choose a appropriate battery that meets the specs of your 2014 Chevy Malibu.
- Anti-corrosion spray: This spray helps shield the battery terminals from oxidation and corrosion, enhancing their longevity.
- New battery terminal bolts: Substitute worn or rusted bolts to supply a safe connection.
Instruments:
| Software | Use | |
|---|---|---|
| 10mm socket wrench | Eradicating and putting in battery terminal bolts | |
| 10mm box-end wrench | Holding battery terminal nuts in place | |
| Battery terminal cleaner | Cleansing corrosion from battery terminals | |
| Gloves | Defending fingers from battery acid |
| Security Precautions |
|---|
| – Disconnect the battery – Put on gloves and eye safety – Don’t smoke or create sparks – Place the battery upright |
Open the Hood and Find the Battery
To entry the battery in your 2014 Chevrolet Malibu, begin by opening the hood. Pull the hood launch lever positioned on the motive force’s aspect footwell and carry the hood. Safe the hood within the open place utilizing the assist rod.
Security Precautions
Earlier than dealing with the battery, there are just a few security precautions to think about:
- Put on security glasses and gloves.
- Don’t contact the battery terminals along with your naked fingers.
- Maintain any flames or sparks away from the battery.
Finding the Battery
The battery is positioned within the trunk of the Malibu. To entry it, comply with these steps:
1. Press the trunk launch button on the important thing fob or dashboard.
2. Raise the trunk lid and find the battery on the left rear nook of the trunk.
The battery is secured in place with a battery hold-down bracket. To take away it, you’ll need to loosen the nut holding the bracket in place. Use a wrench or socket to barely loosen the nut, however don’t take away it utterly.
Disconnect the Adverse Cable
The detrimental cable is the black cable linked to the detrimental terminal of the battery. You will want a wrench or socket to loosen the nut that holds the cable in place. As soon as the nut is free, you may pull the cable off of the terminal.
Watch out to not contact the optimistic terminal of the battery when you’re disconnecting the detrimental cable. When you do, you might create a brief circuit that would injury your automotive or injure your self.
As soon as the detrimental cable is disconnected, you may proceed to take away the previous battery and set up the brand new battery. Remember to join the brand new battery within the appropriate order: optimistic terminal first, then detrimental terminal.
Extra Info
Listed below are some further suggestions for disconnecting the detrimental cable:
- Put on gloves and security glasses to guard your self from battery acid.
- Use a wrench or socket that’s the appropriate measurement for the nut that holds the cable in place.
- Watch out to not overtighten the nut if you reconnect the cable.
| Step | Description |
|---|---|
| 1 | Collect your instruments and security gear. |
| 2 | Find the detrimental terminal of the battery. |
| 3 | Loosen the nut that holds the detrimental cable in place. |
| 4 | Pull the detrimental cable off of the terminal. |
| 5 | Watch out to not contact the optimistic terminal of the battery. |
Disconnect the Constructive Cable
To start, you will must disconnect the optimistic cable from the battery. That is the purple cable that runs from the optimistic terminal of the battery to the starter. Utilizing a wrench, rigorously loosen the nut that holds the cable in place. As soon as the nut is free, you may pull the cable off of the terminal. Watch out to not contact every other steel objects with the cable, as this might trigger a spark.
Observe: It is necessary to disconnect the optimistic cable first, as it will stop any electrical shorts from occurring. When you disconnect the detrimental cable first, you might quick the battery if the wrench touches any steel objects.
3. Take away the Battery Maintain-Down
As soon as the optimistic cable is disconnected, you may take away the battery hold-down. That is often a steel bracket that’s bolted to the battery tray. Utilizing a wrench, loosen the bolts that maintain the bracket in place. As soon as the bolts are free, you may take away the bracket from the battery tray.
4. Raise the Battery Out of the Tray
With the battery hold-down eliminated, now you can carry the battery out of the tray. Watch out to not drop the battery, as it’s heavy. If the battery is caught, you should use a pry bar to softly pry it free.
5. Clear the Battery Terminals
As soon as the battery is out of the tray, it’s best to clear the battery terminals. Over time, the terminals can turn out to be corroded, which may stop the battery from making a superb connection. To wash the terminals, use a wire brush to clean away any corrosion. You can even use a battery terminal cleaner to assist take away any cussed corrosion.
As soon as the terminals are clear, you may reconnect the battery. Begin by connecting the optimistic cable to the optimistic terminal. Tighten the nut that holds the cable in place. Then, join the detrimental cable to the detrimental terminal. Tighten the nut that holds the cable in place.
Lastly, re-install the battery hold-down. Tighten the bolts that maintain the bracket in place. Your battery is now changed.
Take away the Outdated Battery
1. Find the battery: It is often located beneath the hood, on the passenger aspect. Search for the massive, rectangular case with two terminals (plus and minus).
2. Disconnect the detrimental terminal: Utilizing a wrench, loosen the nut on the detrimental terminal (marked with a minus signal). Fastidiously carry the terminal away from the battery put up. Observe: All the time disconnect the detrimental terminal first to forestall quick circuits.
3. Disconnect the optimistic terminal: Repeat the method for the optimistic terminal (marked with a plus signal).
4. Take away the battery hold-down bracket: Find the bracket holding the battery in place. It usually has a bolt or latch that must be loosened or unhooked.
5. Raise out the previous battery: Fastidiously grasp the battery handles or sides and gently carry it straight up and out of the compartment. Be aware of the load and don’t tilt the battery sideways.
6. Examine the battery compartment: As soon as the previous battery is eliminated, take a second to examine the battery compartment for any corrosion or injury. Clear any terminals or surfaces that seem corroded utilizing a wire brush or battery terminal cleaner. If there’s vital injury, it is really useful to have it professionally inspected earlier than putting in the brand new battery.
| Battery Terminal | Image | Colour |
|---|---|---|
| Adverse | – | Black |
| Constructive | + | Pink |
Clear the Battery Terminals
Step 7: Use a Battery Terminal Cleaner and Brush
To make sure that the battery terminals are totally cleaned, apply a battery terminal cleaner to them. The cleaner will dissolve any corrosion or buildup on the terminals. Use a soft-bristled brush to softly scrub the terminals, eradicating any remaining filth or particles.
Alternatively, you may create your individual battery terminal cleaner by mixing baking soda with water. Baking soda is a gentle abrasive that may assist to take away corrosion with out damaging the terminals. Apply the baking soda combination to the terminals and use a brush to clean them clear.
After cleansing the terminals, rinse them totally with water to take away any residual cleaner or baking soda combination. As soon as the terminals are clear and dry, you may reconnect the battery cables.
| Supplies Wanted: |
|---|
| Battery terminal cleaner |
| Comfortable-bristled brush |
| (Elective) Baking soda |
| Water |
Set up the New Battery
Now that you’ve the previous battery eliminated, it is time to set up the brand new one. Listed below are the detailed steps:
1. Examine the New Battery
Earlier than putting in the brand new battery, examine it for any injury or defects. Ensure that the terminals are clear and freed from corrosion.
2. Place the Battery
Fastidiously carry the brand new battery into place. Align it with the terminals within the battery tray.
3. Join the Constructive Terminal
Utilizing the wrench or socket, tighten the nut on the optimistic terminal (often purple). Ensure that it is safe however do not overtighten it.
4. Join the Adverse Terminal
Repeat the identical course of for the detrimental terminal (often black).
5. Examine the Connections
After connecting each terminals, examine them to make sure they’re tight and safe.
6. Clear the Terminals
If needed, use a battery terminal cleaner to scrub the terminals and take away any corrosion.
7. Set up the Battery Cowl
Substitute the battery cowl if there may be one.
8. Reset the Radio and Clock
Relying in your automobile’s settings, it’s possible you’ll must reset the radio and clock after changing the battery. Confer with your Malibu’s proprietor’s handbook for particular directions.
| Step | Motion |
|---|---|
| 1 | Examine the brand new battery for injury or defects. |
| 2 | Place the brand new battery within the battery tray. |
| 3 | Join the optimistic terminal first, tightening the nut securely. |
| 4 | Join the detrimental terminal, additionally tightening the nut securely. |
| 5 | Examine the connections to make sure they’re tight and safe. |
| 6 | Clear the terminals if needed. |
| 7 | Set up the battery cowl, if relevant. |
| 8 | Reset the radio and clock settings if required. |
Reconnect the Cables
9. **Reconnecting the Constructive Cable**: As soon as the detrimental cable is linked, it is time to reconnect the optimistic cable. Find the purple or optimistic terminal in your battery and clear it as effectively. Align the optimistic terminal with the red-colored cable and place the bolt over it. Tighten the bolt securely utilizing your wrench or socket wrench.
After tightening the optimistic cable, double-check each connections to make sure they’re comfortable and safe. Unfastened connections can result in beginning issues or electrical points down the street.
To summarize, the steps for reconnecting the cables are as follows:
| Step | Motion |
|---|---|
| 1 | Join the detrimental cable to the detrimental terminal. |
| 2 | Clear the optimistic terminal and optimistic cable. |
| 3 | Join the optimistic cable to the optimistic terminal. |
| 4 | Tighten the bolt on the optimistic cable. |
| 5 | Double-check each connections to make sure they’re safe. |
Take a look at the Battery and Engine
Earlier than you determine to exchange the battery, it is a good suggestion to check it to guarantee that it is truly the issue. Here is learn how to do it:
- Park the automotive and switch off the engine.
- Open the hood.
- Find the battery. It is often positioned within the entrance of the engine compartment.
- Clear the battery terminals with a wire brush or a bit of sandpaper.
- Join a multimeter to the battery terminals. The purple lead needs to be linked to the optimistic terminal, and the black lead needs to be linked to the detrimental terminal.
- Begin the engine.
- The multimeter ought to learn between 13.5 and 14.5 volts.
- If the multimeter reads beneath 12 volts, the battery could must be changed.
Examine the Battery Cables and Terminals
If the battery take a look at comes again good, the subsequent factor to do is to examine the battery cables and terminals. Search for any indicators of corrosion, free connections, or injury. When you discover any issues, clear the terminals and tighten the connections. If the cables are broken, they may must be changed.
Substitute the Battery
When you’ve examined the battery and the cables and terminals are good, then it is time to change the battery. Here is learn how to do it:
- Disconnect the detrimental battery terminal.
- Disconnect the optimistic battery terminal.
- Take away the previous battery.
- Place the brand new battery within the battery tray.
- Join the optimistic battery terminal.
- Join the detrimental battery terminal.
- Tighten the battery terminals.
- Begin the engine and verify the battery voltage. It needs to be between 13.5 and 14.5 volts.
Find out how to Substitute a Battery in a 2014 Chevy Malibu
Changing a battery in a 2014 Chevy Malibu is a comparatively easy course of that may be accomplished in a matter of minutes. By following these steps, it can save you your self the time and expense of hiring a mechanic.
- Flip off the engine and park the automotive in a protected location.
- Open the hood and find the battery. It will likely be positioned on the passenger aspect of the engine compartment.
- Disconnect the detrimental battery terminal by loosening the nut with a wrench. Watch out to not contact the optimistic terminal with the wrench.
- Disconnect the optimistic battery terminal by loosening the nut with a wrench.
- Raise the battery out of the battery tray.
- Place the brand new battery within the battery tray and safe it with the hold-down bracket.
- Join the optimistic battery terminal by tightening the nut with a wrench.
- Join the detrimental battery terminal by tightening the nut with a wrench.
- Shut the hood and begin the engine.
Folks Additionally Ask
The place is the battery positioned in a 2014 Chevy Malibu?
The battery is positioned on the passenger aspect of the engine compartment.
Can I change the battery in my 2014 Chevy Malibu myself?
Sure, you may change the battery in your 2014 Chevy Malibu your self by following the steps outlined above.
How a lot does it price to exchange a battery in a 2014 Chevy Malibu?
The price of changing a battery in a 2014 Chevy Malibu will fluctuate relying on the kind of battery you select and the situation the place you may have it changed. Nevertheless, you may count on to pay between $100 and $200 for the battery and labor.
How lengthy does it take to exchange a battery in a 2014 Chevy Malibu?
Changing a battery in a 2014 Chevy Malibu ought to take not more than half-hour.
What instruments do I want to exchange a battery in a 2014 Chevy Malibu?
You have to the next instruments to exchange a battery in a 2014 Chevy Malibu:
- Wrench
- Socket wrench
- New battery
