When confronted with the daunting prospect of changing a defective gas pump in your Honda Silverwing, it is essential to arm your self with the proper data and instruments. This step-by-step information will empower you to sort out this process with confidence, making certain the one that you love Silverwing roars again to life with newfound vigor.
Earlier than diving into the method, it is important to collect the required instruments. You will want a set of screwdrivers, wrenches, and a socket set. Security must be your paramount concern, so remember to put on gloves and eye safety all through the process. With all of the instruments in place, find the gas pump, which is often located beneath the gas tank. Rigorously disconnect the gas traces and electrical connectors connected to the pump.
Eradicating the Aspect Panels
To entry the gas pump, you may must take away the facet panels of the Honda Silverwing. Here is an in depth information on the way to do it:
Step 1: Take away the Entrance Panel
Find the 2 screws securing the entrance panel to the physique. Use a Phillips head screwdriver to take away these screws. Then, fastidiously carry the entrance panel off and set it apart.
Step 2: Take away the Underneath Panel
There are six screws securing the beneath panel: two on the entrance, two within the center, and two on the again. Take away these screws with a Phillips head screwdriver. As soon as all of the screws are eliminated, gently pull the beneath panel straight right down to detach it from the physique.
Step 3: Take away the Aspect Panel (Left or Proper)
Find the three screws securing the facet panel to the physique: one on the prime, one within the center, and one on the backside. Take away these screws with a Phillips head screwdriver. Then, fastidiously carry the facet panel off and set it apart.
| Screw Location | Variety of Screws |
|---|---|
| Entrance Panel | 2 |
| Underneath Panel | 6 |
| Aspect Panel (Left or Proper) | 3 |
Finding the Gas Tank
The gas tank on the Honda Silverwing is positioned beneath the seat. To entry the tank, observe these steps:
1. Take away the seat by lifting up on the entrance of the seat and pulling it in direction of you.
2. Find the gas tank cap on the highest of the tank. The cap is often black or grey and has a Honda emblem on it.
3. Take away the gas tank cap by turning it counterclockwise.
4. Elevate the gas tank up and out of the motorbike.
Accessing the Gas Pump
The gas pump is positioned contained in the gas tank. To entry the gas pump, observe these steps:
1. Take away the gas filter from the gas pump. The gas filter is positioned on the facet of the gas pump and is held in place by a single bolt.
2. Take away the gas pump from the gas tank. The gas pump is held in place by 4 bolts. Take away the bolts and carry the gas pump out of the tank.
3. Disconnect {the electrical} connector from the gas pump.
4. Take away the gas pump from the motorbike.
Gas Pump Removing Desk
| Step | Motion |
|---|---|
| 1 | Take away gas filter from gas pump |
| 2 | Take away gas pump from gas tank. |
| 3 | Disconnect electrical connector from gas pump. |
| 4 | Take away gas pump from motorbike |
Disconnecting the Gas Strains
To disconnect the gas traces, you have to to observe these steps:
-
Find the gas traces. The gas traces are sometimes positioned on the facet of the gas tank. They’re normally black or blue in colour.
2. Take away the gas line clamps. The gas line clamps are small steel clips that maintain the gas traces in place. Use a pair of pliers or a screwdriver to take away the clamps.
- **Disconnect the **gas traces.
As soon as the gas line clamps are eliminated, you may disconnect the gas traces by pulling them straight off the gas tank. Watch out to not injury the gas traces or the gas tank when disconnecting them.
| Gas Line | Location |
|---|---|
| Provide line | Proper facet of the tank |
| Return line | Left facet of the tank |
-
Plug the gas traces. As soon as the gas traces are disconnected, you have to to plug them to stop gas from leaking out. You need to use a rubber cap or a bit of tape to plug the gas traces.
Eradicating the Gas Tank
1. **Find the gas tank.** The gas tank is positioned beneath the seat of the motorbike.
2. **Disconnect the gas line.** Use a wrench to loosen the gas line clamp and disconnect the gas line from the gas tank.
3. **Disconnect {the electrical} connector.** Find {the electrical} connector for the gas pump and disconnect it.
4. **Take away the gas tank bolts.** There are 4 bolts that maintain the gas tank in place. Use a wrench to take away these bolts.
Eradicating the Gas Pump
1. **Find the gas pump.** The gas pump is positioned contained in the gas tank.
2. **Take away the gas pump retainer.** Use a screwdriver to take away the screws that maintain the gas pump retainer in place.
3. **Pull out the gas pump.** As soon as the gas pump retainer is eliminated, you may pull out the gas pump from the gas tank.
Changing the Gas Filter
1. **Find the gas filter.** The gas filter is positioned contained in the gas tank, close to the gas pump.
2. **Take away the gas filter.** Use a wrench to loosen the gas filter clamp and take away the gas filter.
3. **Set up the brand new gas filter.** Set up the brand new gas filter within the reverse order of elimination.
Reinstalling the Gas Tank
1. **Place the gas tank in place.** Place the gas tank in place on the motorbike.
2. **Set up the gas tank bolts.** Tighten the 4 bolts that maintain the gas tank in place.
3. **Join {the electrical} connector.** Join {the electrical} connector for the gas pump.
4. **Join the gas line.** Join the gas line to the gas tank and tighten the gas line clamp.
Accessing the Gas Pump
To entry the gas pump in a Honda Silverwing, you have to to take away the next elements:
- Seat
- Rear physique panel
- Gas tank
- Battery
- Gas pump cowl
Eradicating the Gas Pump Cowl
1. Find the gas pump cowl on the left facet of the motorbike, beneath the gas tank.
2. Take away the 2 bolts that safe the quilt utilizing a 10mm socket.
3. Rigorously carry the quilt off the motorbike.
As soon as the gas pump cowl is eliminated, you’ll have entry to the gas pump. The gas pump is held in place by a single bolt. Take away this bolt utilizing a 12mm socket and thoroughly carry the gas pump out of the gas tank.
When reinstalling the gas pump, you’ll want to use a brand new O-ring on the gas pump inlet. Tighten the gas pump bolt to the desired torque and reinstall the gas pump cowl.
| Part | Torque |
|---|---|
| Gas pump bolt | 10 Nm (7 ft-lbs) |
| Gas pump cowl bolts | 5 Nm (3 ft-lbs) |
Disconnecting the Electrical Connector
As soon as the gas tank is faraway from the chassis and the gas pump meeting is uncovered, you have to to disconnect {the electrical} connector that provides energy to the gas pump. Observe these steps:
1. Find {the electrical} connector on the gas pump meeting. It’s sometimes a black or grey plastic connector with a number of wires resulting in it.
2. Press the discharge tab or button on {the electrical} connector. It will launch the locking mechanism that holds the connector in place.
3. Gently pull {the electrical} connector immediately from the gas pump meeting. Watch out to not injury the wires or terminals.
4. As soon as {the electrical} connector is disconnected, you have to to take away the gas pump meeting from the gas tank. To do that, find the mounting bolts or screws that maintain the gas pump meeting in place and take away them.
5. Rigorously carry the gas pump meeting out of the gas tank.
6. Examine {the electrical} connector for injury or corrosion. If the connector is broken or corroded, it could must be changed.
7. If {the electrical} connector is in good situation, you may reconnect it to the gas pump meeting by following the steps in reverse order.
Eradicating the Gas Pump Mount
To take away the gas pump mount, you have to to:
- Find the gas pump mount. It’s positioned on the underside of the gas tank, in direction of the rear of the motorbike.
- Take away the 2 bolts that safe the gas pump mount to the gas tank.
- Rigorously carry the gas pump mount off of the gas tank.
- Disconnect the gas line from the gas pump mount.
- Disconnect {the electrical} connector from the gas pump.
- Take away the gas pump from the gas pump mount.
- The seat
- The rear fairing
- The gas tank
- The airbox
- The throttle physique
- The engine is tough to start out.
- The engine stalls when you are driving.
- The engine loses energy when you are driving.
- You hear a whining noise coming from the gas tank.
7. Examine the gas pump mount for any injury or put on.
Rigorously examine the gas pump mount for any indicators of injury or put on. If there’s any injury or put on, the gas pump mount might must be changed. Consult with the producer’s directions for particular alternative procedures.
| Harm or Put on | Motion |
|---|---|
| Cracks or breaks | Substitute the gas pump mount. |
| Rust or corrosion | Clear the gas pump mount with a wire brush and apply a rust-resistant coating. |
| Bent or deformed | Substitute the gas pump mount. |
Extracting the Gas Pump
1. Security Precautions
Make sure the engine is off and has cooled down. Disconnect the unfavorable battery terminal for security.
2. Find the Gas Pump
Consult with your Honda Silverwing’s service guide to find out the gas pump’s actual location.
3. Take away the Gas Tank
Find the gas tank’s mounting bolts and disconnect any electrical connections. Rigorously carry the gas tank and set it apart.
4. Disconnect the Gas Strains
Use gas line pliers or a wrench to detach the gas traces related to the gas pump.
5. Entry the Gas Pump Meeting
Relying in your Silverwing mannequin, you might must take away an entry panel or housing to realize entry to the gas pump meeting.
6. Unbolt the Gas Pump Meeting
Find the bolts or screws securing the gas pump meeting in place and thoroughly take away them utilizing an appropriate socket or wrench.
7. Elevate Out the Meeting
As soon as the bolts are eliminated, gently carry the gas pump meeting out of its housing.
8. Separating the Gas Pump from the Meeting
The gas pump is often secured inside the meeting utilizing a retaining ring or a locking mechanism. Consult with your service guide for particular directions on the way to safely take away the gas pump from the meeting. Normally, this includes utilizing a circlip pliers to take away the retaining ring or fastidiously prying the gas pump away from the meeting whereas being aware of potential electrical connections.
9. Examine the Gas Pump
As soon as the gas pump is extracted, examine it for any seen injury or put on. Test the filter and gas traces for any clogging or particles.
Reinstalling the Gas Pump
With the gas filter put in, it is time to reassemble the gas pump. Begin by fastidiously aligning the gas pump with the gasket and gas filter. As soon as it is in place, safe it with the bolts. Torque the bolts to the desired torque, which may be discovered within the service guide or within the desk beneath.
| 12 months | Torque (Nm) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2001-2003 | 10 Nm (7.4 ft-lbs) | ||||||||
| 2004-2009 | 12 Nm (8.9 ft-lbs)
As soon as the gas pump is secured, reconnect the gas line and electrical connector. Double-check that every little thing is related correctly and tightened to the right torque. Reassembling the Gas System10. Reconnecting the Gas PumpNow that the gas pump is again in place, it is time to reconnect the gas traces. Begin by attaching the decrease gas line to the pump’s inlet port. Guarantee the road is totally seated and tightened utilizing the equipped clamp. Subsequent, do the identical for the higher gas line, which connects to the pump’s outlet port. Once more, make sure that the road is safe. Lastly, reconnect {the electrical} connector to the gas pump. Make sure the connector is pushed in firmly till it clicks into place.
With the gas traces and electrical connector reconnected, your gas system is now reassembled. Use the remaining steps to finish the reinstallation of the gas module and tank. Honda Silverwing How To Get To The Gas PumpTo get to the gas pump on a Honda Silverwing, you have to to take away the next elements: After getting eliminated these elements, it is possible for you to to entry the gas pump. Watch out when eradicating the gas pump, as it’s related to the gas traces. Additionally, you will want to exchange the gas pump gasket if you set up the brand new gas pump. Individuals Additionally Ask About Honda Silverwing How To Get To The Gas PumpHow do I do know if my Honda Silverwing gas pump is dangerous?There are just a few indicators that will point out that your Honda Silverwing gas pump is dangerous. These indicators embrace: How a lot does it price to exchange a Honda Silverwing gas pump?The associated fee to exchange a Honda Silverwing gas pump will fluctuate relying on the yr and mannequin of your motorbike. Nonetheless, you may anticipate to pay between $200 and $400 for the elements and labor. Can I exchange the Honda Silverwing gas pump myself?Sure, you may exchange the Honda Silverwing gas pump your self. Nonetheless, it is very important word that this can be a advanced restore. In case you are not comfy working in your motorbike, it’s best to take it to a mechanic. |
