In case you are wanting so as to add an additional pipe to your outside faucet, there are some things you will have to do. First, you will have to collect the mandatory supplies. These embody a brand new pipe, a pipe cutter, a pipe wrench, and a few Teflon tape. After getting all your supplies, you’ll be able to start the method of including the brand new pipe.
Step one is to chop the previous pipe. To do that, you will have to make use of the pipe cutter. Be sure to chop the pipe squarely in order that the brand new pipe will match correctly. After getting reduce the previous pipe, you’ll be able to take away it from the tap. Subsequent, you will have to use Teflon tape to the threads of the brand new pipe. This can assist to create a watertight seal. After getting utilized the Teflon tape, you’ll be able to screw the brand new pipe into the tap.
Lastly, you will have to tighten the pipe with the pipe wrench. Be sure to tighten the pipe securely, however don’t overtighten it. After getting tightened the pipe, you’ll be able to activate the water and examine for leaks. If there are not any leaks, then you’ve gotten efficiently added a brand new pipe to your outside faucet.
Instruments and Supplies Required
To efficiently add one other pipe to your outside faucet, you may want the next instruments and supplies:
Pipe Wrench
Two pipe wrenches are required, one to carry the tap in place and the opposite to tighten the brand new pipe. Select pipe wrenches which might be appropriately sized for the diameter of the pipes you may be working with. Adjustable pipe wrenches are a great choice for versatility.
Hack Noticed
A hack noticed is used to chop the present pipe to create a connection level for the brand new pipe. Choose a hack noticed with a pointy blade designed for chopping metallic. Guarantee you’ve gotten further blades readily available if mandatory.
Taps
A substitute faucet is required for the brand new pipe. Select a faucet that’s suitable together with your plumbing system and meets your required stream price and design preferences.
PEX Pipe
PEX (polyethylene) pipe is a versatile and sturdy choice for connecting the brand new faucet to the present pipe. Decide the suitable diameter and size of PEX pipe wanted in your utility.
PEX Pipe Connectors
PEX pipe connectors are used to hitch the PEX pipe to the tap and the present pipe. Choose connectors which might be suitable with the PEX pipe diameter and the present plumbing fixtures.
Teflon Tape
Teflon tape is a sealant used to forestall leaks at pipe connections. Wrap Teflon tape across the threads of the connectors earlier than tightening to make sure a watertight seal.
Different Supplies
Along with the important instruments and supplies listed above, you may additionally require the next:
- Security glasses
- Work gloves
- Plumber’s putty (elective)
| Device or Materials | Measurement or Sort | Amount |
|—|—|—|
| Pipe Wrenches | Adjustable | 2 |
| Hack Noticed | Steel-cutting blade | 1 |
| Taps | Appropriate with plumbing | 1 |
| PEX Pipe | Diameter and size required | 1 |
| PEX Pipe Connectors| Appropriate with PEX pipe and fixtures | 3 |
| Teflon Tape | N/A | 1 |
| Security Glasses | N/A | 1 |
| Work Gloves | N/A | 1 |
Security Precautions
1. Flip off the water provide: Earlier than starting any work, it’s crucial to close off the water provide to the tap. This may be achieved by finding the principle water shut-off valve, sometimes discovered close to the road or within the basement of your house.
2. Put on protecting gear: When working with plumbing, it is very important defend your self from potential hazards resembling water, chemical substances, and sharp objects. Put on gloves, security glasses, and applicable clothes to defend your self.
3. Examine the present pipe: Earlier than putting in the brand new pipe, fastidiously look at the situation of the present pipe. Test for leaks, cracks, or different injury that might point out potential issues. If any injury is current, it’s endorsed to seek the advice of with a licensed plumber for restore or substitute.
4. Collect mandatory supplies: Earlier than commencing the duty, guarantee you’ve gotten all the mandatory supplies, together with the brand new pipe, fittings, wrenches, pipe sealer, and thread tape.
5. Plan the pipe route: Decide essentially the most environment friendly and logical route for the brand new pipe. Take into account components resembling the placement of the water supply, the tap, and any obstacles in the best way.
Selecting the Proper Pipe
Step one in including one other pipe to your outside faucet is to decide on the appropriate pipe. There are a lot of several types of pipes out there, so it is necessary to pick one that’s suitable together with your present plumbing system and meets your wants.
Materials
Pipes may be constituted of quite a lot of supplies, together with copper, PVC, and PEX. Copper is essentially the most sturdy and costly choice, whereas PVC is essentially the most reasonably priced and best to work with. PEX is a more recent kind of pipe that’s versatile and straightforward to put in, however it’s costlier than PVC.
Measurement
The dimensions of the pipe you want will rely on the stream price of your faucet. A 1/2-inch pipe is ample for many outside taps, however it’s possible you’ll want a 3/4-inch pipe when you have a high-flow faucet.
Size
The size of the pipe you want will rely on the space between your faucet and the water supply. You’ll want to measure the space fastidiously earlier than you buy the pipe.
| Materials | Execs | Cons |
|---|---|---|
| Copper | Sturdy, corrosion-resistant | Costly, troublesome to work with |
| PVC | Reasonably priced, straightforward to work with | Not as sturdy as copper, can change into brittle in chilly climate |
| PEX | Versatile, straightforward to put in | Costlier than PVC, may be broken by daylight |
Measuring and Marking the Pipe
Precisely measuring and marking the pipe is essential for a profitable set up. Comply with these steps:
1. Decide the Pipe Size
Measure the space between the present pipe and the specified location of the brand new pipe. Add just a few further inches to permit for fittings and connections.
2. Select the Pipe Materials and Measurement
Choose the suitable pipe materials primarily based in your particular wants, resembling PVC, CPVC, or metallic. The pipe dimension ought to match the present pipe.
3. Reduce the Pipe
Use a pipe cutter or hacksaw to chop the pipe to the specified size. Guarantee a clear and perpendicular reduce for a safe connection.
4. Marking the Pipe
Mark the pipe on the following areas:
- Finish Markings: Clearly mark each ends of the pipe to point the supposed route of stream (e.g., “Water In” and “Water Out”).
- Connection Factors: Measure and mark the precise areas the place fittings or different connections will likely be made. Use a degree or plumb bob to make sure correct alignment.
- Notches for Clamps: If utilizing clamps to safe the pipe, mark the areas the place notches will likely be reduce to accommodate the clamps. Be sure the notches are aligned and symmetrical.
Slicing and Making ready the Pipe
Step 1: Collect Instruments and Supplies
Earlier than you begin, collect the mandatory instruments and supplies, together with a hacksaw, measuring tape, primer, and adhesive.
Step 2: Measure and Mark the Pipe
Measure the specified size of the brand new pipe part and use a marker to point the chopping level.
Step 3: Reduce the Pipe
Safe the pipe in a vise and thoroughly reduce it utilizing a hacksaw. Make a clear and perpendicular reduce to make sure a decent match.
Step 4: Deburr the Pipe Ends
Use a file or sandpaper to take away any sharp edges or burrs from the reduce ends of the pipe. This can guarantee a easy connection.
Step 5: Apply Primer and Adhesive
Apply a skinny layer of primer to each the within and out of doors of the pipe ends to enhance adhesion. Then, apply a beneficiant quantity of adhesive to 1 finish of the pipe.
Step 6: Be part of the Pipe Sections
Rapidly insert the unprimed finish of the brand new pipe part into the primed finish of the present pipe. Rotate and press the sections collectively till they’re absolutely related.
Step 7: Maintain for Curing Time
Preserve stress on the joined sections for the advisable curing time specified by the adhesive producer.
Step 8: Take away Extra Adhesive
As soon as the adhesive has cured, use a moist material to wipe away any extra adhesive that has squeezed out across the joint.
Step 9: Confirm Connection
Run water via the pipe to confirm that the connection is leak-free. If mandatory, apply extra sealant to any leaks.
Becoming a member of the New Pipe
Becoming a member of the brand new pipe to the present system requires cautious preparation and a spotlight to element. Comply with these steps to make sure a safe and leak-proof connection:
1. Reduce the Pipes
Mark and reduce the present pipe and the brand new pipe to the specified lengths utilizing a pipe cutter. Make sure the cuts are clear and perpendicular to the pipe.
2. Take away Burrs and Debur
Take away any burrs or particles from the reduce ends of the pipes utilizing a deburring software or sandpaper. This can assist forestall leaks and guarantee a easy connection.
3. Apply Primer and Cement
Apply a primer to the within of the socket finish of the becoming and the surface of the pipe finish. Permit the primer to dry in response to the producer’s directions.
4. Apply Cement
After the primer has dried, apply a liberal quantity of cement to each the within of the socket finish of the becoming and the surface of the pipe finish.
5. Insert the Pipe into the Becoming
Instantly insert the pipe into the becoming, twisting it barely as you push it in. Make sure the pipe is absolutely seated within the becoming.
6. Tighten the Joint
Use a wrench or different appropriate software to tighten the joint in response to the producer’s specs. The next desk gives pointers for tightening several types of pipe joints:
| Pipe Materials | Tightening Torque (ft-lbs) |
|---|---|
| PVC | 10-15 |
| CPVC | 15-20 |
| ABS | 10-15 |
After tightening, examine the joint for leaks. If a leak is detected, disassemble the joint and repeat the steps above.
Connecting the Pipe to the Out of doors Faucet
To attach the pipe to the outside faucet, comply with these seven detailed steps:
1. Flip Off and Disconnect the Water Predominant
Find and switch off the water important to forestall water stress from damaging the pipe throughout set up.
2. Take away the Current Aerator
Unscrew the aerator connected to the top of the outside faucet utilizing a pair of pliers or an adjustable wrench.
3. Set up the Adapter
Screw the brass hose bib adapter onto the tap threads. Tighten it securely utilizing a wrench.
4. Connect the Backyard Hose Elbow
Join a 90-degree backyard hose elbow to the brass adapter. Hand-tighten it initially and use pliers to additional safe it.
5. Prolong the Pipe Size (Non-obligatory)
If desired, lengthen the size of the pipe utilizing extra PVC pipes and connectors. Guarantee all connections are correctly sealed with PVC cement.
6. Seal the Joint with Teflon Tape
Wrap Teflon tape across the threads of the backyard hose elbow that may hook up with the pipe. This can create a watertight seal.
7. Join the Pipe to the Elbow
Screw the pipe onto the Teflon-wrapped threads of the backyard hose elbow. Tighten it by hand initially after which use a wrench to make sure it’s safe. Take into account the next extra suggestions for attaching the pipe:
– Make sure the pipe is straight and parallel to the tap.
– Keep away from overtightening the connection, as this may injury the threads.
– If the pipe is made of soppy materials (e.g., PEX), use a rubber washer for a greater seal.
– Test for leaks by turning the water provide again on and inspecting the connections.
Testing for Leaks
After your new pipe is put in, it’s important to check for leaks to make sure the repairs had been profitable and there are not any potential water injury dangers. Listed here are the steps concerned in testing for leaks:
- Flip the water again on on the important shutoff valve.
- Test all of the joints and connections the place the brand new pipe was put in, in search of any indicators of water seepage or leaks.
- Run water via the taps and fixtures related to the brand new pipe to examine for correct water stream and any leaks.
- Examine the realm across the pipe for any puddles or dampness that might point out a leak.
- Use a flashlight to look at the pipe and connections in low-light circumstances to reinforce visibility of any water leaks.
- Pay attention for any uncommon noises, resembling dripping or whistling sounds, which might be an indication of a leak.
- Place a small quantity of bathroom paper or tissue across the joints and connections. If the tissue turns into moist, it signifies a doable leak.
- Use knowledgeable leak detector software to pinpoint the precise location of a leak. These instruments emit a high-pitched sound once they detect the presence of water.
In case you uncover any leaks throughout the testing course of, it’s advisable to handle them promptly to forestall pricey water injury. You may both try and tighten the connections your self or contact a licensed plumber for help.
Putting in a Pipe Insulation Cowl
9. **Pipe Insulation Cowl:**
To additional improve insulation and defend the pipes from exterior components, think about putting in a pipe insulation cowl. This cowl acts as an extra layer of safety and helps keep the specified temperature throughout the pipes.
Listed here are the steps concerned in putting in a pipe insulation cowl:
| Step | Description |
|---|---|
| 1 | Measure the size of the pipe to find out the suitable dimension of insulation cowl. |
| 2 | Slide the insulation cowl over the pipe, guaranteeing it suits snugly. |
| 3 | Use duct tape or different appropriate adhesive to safe the insulation cowl in place. |
| 4 | Overlap the sides of the insulation cowl for added safety and to forestall moisture penetration. |
| 5 | Use a pointy knife or utility blade to trim any extra insulation cowl from the ends. |
By following these steps, you’ll be able to successfully set up a pipe insulation cowl to guard your outside pipes from freezing and different opposed climate circumstances.
Finalizing the Set up
10. Apply Joint Compound and Mesh Tape: Combine joint compound in response to the producer’s directions. Apply a skinny layer of joint compound over the mesh tape, overlaying it fully. Permit the primary layer to dry, then apply a second layer to easy the floor.
11. Sand the Joint: As soon as the joint compound has dried, sand it calmly with fine-grit sandpaper. This can take away any imperfections and create a easy, even floor.
12. Prime the Joint: Apply a coat of primer over the joint to seal it and put together it for portray.
13. Paint the Joint: Paint the joint and surrounding space with a coloration that matches the present exterior. Permit the paint to dry fully.
14. Caulk the Joints: Apply a bead of caulk across the edges of the pipe and the wall. This can seal any gaps and forestall water from leaking into the joint.
15. Activate the Water: Slowly activate the water provide and examine for any leaks. Tighten any connections or joints as wanted.
16. Examine Recurrently: Recurrently examine the set up to make sure that it’s functioning correctly and there are not any leaks. Any points ought to be addressed promptly.
| Instruments & Supplies |
|---|
| Joint Compound |
| Mesh Tape |
| Sandpaper |
| Primer |
| Paint |
| Caulk |
The way to Add One other Pipe to an Out of doors Faucet
Including an extra pipe to your outside faucet is a comparatively straightforward venture that may be accomplished in only a few quick steps. By following these easy directions, you’ll be able to simply improve the variety of spigots out there for outside use, making it extra handy to water your garden, backyard, or wash your automotive.
Supplies Required:
- New pipe (1/2-inch copper or PEX)
- Compression fittings (two)
- Pipe cutter
- Wrenches (two)
- Teflon tape
Steps:
1. Flip off the water provide to the outside faucet. Open the tap to launch any residual water.
2. Use the pipe cutter to chop the present pipe about 6 inches away from the tap. Deburr the reduce ends of the pipe with a file or sandpaper.
3. Connect one finish of a compression becoming to the reduce finish of the present pipe. Tighten the becoming utilizing wrenches.
4. Connect the opposite finish of the compression becoming to 1 finish of the brand new pipe.
5. Wrap Teflon tape across the threads of the opposite finish of the brand new pipe.
6. Screw the brand new pipe into the outside faucet.
7. Activate the water provide and examine for leaks. Tighten any fittings which might be leaking.
Individuals Additionally Ask
How a lot does it value so as to add one other pipe to an out of doors faucet?
The price of including one other pipe to an out of doors faucet will range relying on the supplies used and the complexity of the venture. Nevertheless, it’s sometimes a comparatively cheap venture that may be accomplished for lower than $50.
Can I add a number of pipes to an out of doors faucet?
Sure, you’ll be able to add a number of pipes to an out of doors faucet. Nevertheless, it’s best to be certain that the water stress is ample to help the extra spigots. If the water stress is simply too low, it’s possible you’ll want to put in a stress booster.
What kind of pipe is finest for including to an out of doors faucet?
One of the best kind of pipe for including to an out of doors faucet is copper or PEX. Copper is a sturdy materials that’s immune to corrosion and freezing. PEX is a versatile materials that’s straightforward to put in and can be immune to corrosion and freezing.
