Adjusting the time in your Armitron watch is a straightforward process that may be accomplished in just a few straightforward steps. Whether or not you are setting the time for the primary time or just adjusting it for daylight saving time, following these directions will be certain that your watch is at all times displaying the right time. Earlier than you start, just be sure you have a small, pointed object, reminiscent of a pen or a toothpick, readily available. Additionally, you will must know the right time, both by taking a look at a dependable time supply or through the use of a timekeeping app in your telephone.
First, find the small button on the aspect of your watch. This button is often situated close to the two o’clock or 4 o’clock place. After you have discovered the button, press and maintain it down for just a few seconds. It will trigger the second hand to cease transferring and the digital show to start out flashing. Subsequent, use the pointed object to regulate the hour and minute palms to the right time. Watch out to not overwind the palms, as this may harm the watch. After you have set the right time, launch the button and the watch will begin operating once more.
In case your Armitron watch has a digital show, the method for adjusting the time is barely completely different. First, press the “Mode” button till you attain the timekeeping mode. Then, use the “Up” and “Down” buttons to regulate the hour and minute digits. After you have set the right time, press the “Mode” button once more to exit the timekeeping mode. Your watch will now be displaying the right time.
Setting the Time Manually
To set the time manually in your Armitron watch, comply with these steps:
- Find the crown: The crown is the small knob on the aspect of the watch case. It’s often situated on the 3 o’clock place.
- Pull out the crown: Gently pull the crown out to the primary place. It will cease the watch from operating.
- Flip the crown: Flip the crown clockwise or counterclockwise to regulate the hour and minute palms. Be aware that some Armitron watches have a separate hand for seconds, which might be adjusted by turning the crown in a distinct path.
- Push the crown again in: As soon as the time is about, push the crown again into the watch case. The watch will begin operating once more.
| Crown Place | Operate |
|---|---|
| Regular | Operating |
| Pulled out one click on | Cease operating, regulate hour and minute palms |
Utilizing the Digital Crown
Adjusting the time on an Armitron watch with a digital crown is a straightforward course of. Earlier than you start, be certain that the watch is in time mode by urgent the corresponding button.
1. Find the digital crown located on the aspect of the watch. It’s often a small, protruding knob or wheel.
2. Gently flip the crown **clockwise** to **advance the hour hand** by one hour. Flip the crown **counterclockwise** to **lower the hour hand** by one hour.
3. As soon as the right hour is about, pull out the crown one degree (some fashions require two ranges).
4. Flip the crown **clockwise** to **advance the minute hand** by one minute. Flip the crown **counterclockwise** to **lower the minute hand** by one minute.
5. As soon as the right minutes are set, push the crown again into its regular place. The time is now set efficiently.
| Operate | Course |
|---|---|
|
Hour Adjustment |
Clockwise to extend, Counterclockwise to lower |
|
Minute Adjustment |
Clockwise to extend, Counterclockwise to lower |
| Button | Operate |
|---|---|
| Up Button | Improve the hour or minute worth |
| Down Button | Lower the hour or minute worth |
| Mode Button | Change between “HR” (hour) and “MIN” (minute) modes |
Maintain the Up Button or Down Button to make the values change constantly, or press it repeatedly for incremental changes.
Saving the Time Zone
After adjusting the right time zone, press the “ADJ” or “SET” button once more to save lots of the settings.
The watch will routinely swap to the chosen time zone and show the right time.
Adjusting for Daylight Saving Time
When Daylight Saving Time (DST) begins or ends, you will want to regulate your Armitron watch by one hour. Here is how:
- Pull the crown out to the second click on.
- Flip the crown clockwise to advance the hour hand by one hour.
- Push the crown again in to the primary click on.
- Your watch is now set to the right time for DST.
Further Notes for DST Adjustment
- When DST begins within the spring, you will “spring ahead” by advancing the time by one hour.
- When DST ends within the fall, you will “fall again” by turning the time again by one hour.
- Not all international locations observe DST. Verify your native laws to find out if DST applies to your area.
- Some Armitron watches have an computerized DST adjustment function. In case your watch has this function, it is going to routinely regulate the time for DST with none guide intervention.
Setting the Stopwatch
To make use of the stopwatch perform, press the “Mode” button till the stopwatch icon seems on the show. The stopwatch will begin operating instantly.
To cease the stopwatch, press the “Cease/Reset” button. To reset the stopwatch, press the “Cease/Reset” button once more.
To separate the stopwatch, press the “Cut up/Reset” button. It will cease the stopwatch and file the present time as a break up time. To renew the stopwatch, press the “Cut up/Reset” button once more.
Checking Cut up Instances
To verify the break up occasions, press the “Mode” button till the “Cut up” display seems. The break up occasions will likely be displayed in a listing. To clear the break up occasions, press the “Cease/Reset” button.
| Button | Operate |
|---|---|
| Mode | Cycles via modes (time, stopwatch, alarm, timer) |
| Begin/Cease | Begins and stops the stopwatch |
| Reset | Resets the stopwatch |
| Cut up | Data a break up time |
Utilizing the Alarm
To make use of the alarm, you have to to first set the time. To do that, press and maintain the “Mode” button till the “Alarm” icon seems on the show. Then, use the “Begin/Cease” and “Reset” buttons to set the hour and minute for the alarm. As soon as the time is about, press the “Mode” button once more to save lots of the settings.
To activate the alarm, press the “Alarm On/Off” button. The alarm will sound on the set time and can proceed to sound for 20 seconds. To cease the alarm, press the “Begin/Cease” button.
You too can set the alarm to snooze. To do that, press the “Snooze” button when the alarm is sounding. The alarm will then sound once more in 10 minutes. You may snooze the alarm as much as 9 occasions.
To show off the alarm fully, press the “Alarm On/Off” button once more.
Setting the Alarm Time
To set the alarm time, comply with these steps:
- Press and maintain the “Mode” button till the “Alarm” icon seems on the show.
- Use the “Begin/Cease” and “Reset” buttons to set the hour and minute for the alarm.
- Press the “Mode” button once more to save lots of the settings.
| Button | Operate |
|---|---|
| Begin/Cease | Units the hour and minute for the alarm. |
| Reset | Toggles between hour and minute setting. |
| Mode | Saves the settings and exits alarm mode. |
Setting the Blinking Indicator
To set the blinking indicator, comply with these steps:
1. Press and maintain the “Mode” button till the blinking indicator seems on the show.
2. Press the “Hour” button to pick out the specified hour.
3. Press the “Minute” button to pick out the specified minute.
4. Press the “Second” button to substantiate the time.
5. Press and maintain the “Mode” button to exit the time-setting mode.
6. The blinking indicator will now flash each second.
7. To show off the blinking indicator, press and maintain the “Begin/Cease” button for 3 seconds.
The blinking indicator is primarily designed for use in settings the place the consumer might have a visible indication of the passing time. For instance, it may be used to trace the remaining time throughout a exercise or to remind the consumer of an essential occasion.
| Indicator Standing | Indication |
|---|---|
| Blinking | Signifies that the watch is within the time-setting mode or that the blinking indicator has been activated. |
| Not Blinking | Signifies that the watch is within the regular timekeeping mode or that the blinking indicator has been deactivated. |
Calibrating the Time
As soon as you’ve got set the time and date in your Armitron watch, you could must calibrate it to make sure it stays correct. To calibrate the time:
- Press the “Mode” button till the timekeeping mode is displayed.
- Maintain down the “Alter” button till the seconds begin flashing.
- Launch the “Alter” button and instantly press it once more to zero the seconds.
- Use the “Ahead” or “Again” buttons to regulate the minutes and hours.
- As soon as the time is about, maintain down the “Alter” button for two seconds to save lots of the adjustments.
- Press the “Mode” button to exit the timekeeping mode.
Superior Calibration (For analog watches solely):
- Comply with steps 1-3 from the earlier directions.
- Maintain down the “Ahead” or “Again” button for five seconds to enter the superior calibration mode.
- The hour hand will transfer to the 12 o’clock place.
- Press the “Ahead” or “Again” button to regulate the hour hand.
- As soon as the hour hand is about, press the “Alter” button to maneuver to the minute hand.
- Use the “Ahead” or “Again” buttons to regulate the minute hand.
- As soon as the minute hand is about, press the “Alter” button to set the second hand.
- Press the “Mode” button to exit the superior calibration mode.
Be aware: In case your Armitron watch is a digital watch, you’ll not have the choice for superior calibration.
Resetting the Watch
In case your Armitron watch will not be displaying the right time, you may reset it by following these steps:
- Find the reset button on the again of the watch.
- Use a paperclip or different small object to press and maintain the reset button for about 5 seconds.
- The watch will show “RESET” on the display.
- Press the reset button once more to substantiate the reset.
- The watch will now be reset to the manufacturing facility default settings.
9. Time Zones and Daylight Saving Time (DST)
If you’re touring to a distinct time zone, you may regulate your watch’s time zone by following these steps:
| Time Zone | DST |
|---|---|
| Japanese Time (ET) | Sure |
| Central Time (CT) | Sure |
| Mountain Time (MT) | Sure |
| Pacific Time (PT) | Sure |
| Alaska Time (AK) | No |
| Hawaii Time (HST) | No |
- Press and maintain the mode button (often situated on the aspect of the watch) till the time zone mode is displayed.
- Use the up or down buttons to scroll via the time zones till the right time zone is displayed.
- Press the mode button once more to substantiate the time zone change.
- If the watch is in DST mode, the DST indicator will likely be displayed on the display.
- To show DST on or off, press and maintain the DST button (often situated on the aspect of the watch) till the DST indicator is displayed or hidden.
Time Adjustment
For analog watches, find the crown in conjunction with the watch and pull it out. Flip the crown clockwise to regulate the hour and minute palms. It’s possible you’ll must press the crown again in barely to regulate the second hand.
For digital watches, press and maintain the “Mode” or “Set” button till the time begins flashing. Use the “+” or “-” buttons to regulate the time. Press the “Mode” or “Set” button once more to save lots of the adjustments.
Troubleshooting Timekeeping Points
1. The watch is operating quick
- The watch could also be magnetized. To demagnetize it, place it on a picket desk and faucet it evenly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a smooth brush.
- The battery could also be weak. Change the battery.
2. The watch is operating gradual
- The watch could also be magnetized. To demagnetize it, place it on a picket desk and faucet it evenly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a smooth brush.
- The watch might have a free steadiness wheel. Take it to a watchmaker to have it repaired.
3. The second hand is leaping
- The watch could also be magnetized. To demagnetize it, place it on a picket desk and faucet it evenly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a smooth brush.
4. The watch will not be maintaining time
- The watch could also be magnetized. To demagnetize it, place it on a picket desk and faucet it evenly with a hammer for a couple of minutes.
- The watch could also be soiled. Open the case and clear the motion with a smooth brush.
- The battery could also be weak. Change the battery.
- The watch might have a damaged or broken motion. Take it to a watchmaker to have it repaired.
Find out how to Change Armitron Watch Time
1. Begin by pulling the crown outward to the primary click on. It will cease the second hand from transferring.
2. Flip the crown clockwise to maneuver the hour hand ahead. Flip it counterclockwise to maneuver the hour hand backward.
3. Pull the crown out to the second click on. It will mean you can change the minute hand.
4. Flip the crown clockwise to maneuver the minute hand ahead. Flip it counterclockwise to maneuver the minute hand backward.
5. Push the crown again in to the primary click on. It will begin the second hand transferring once more.
6. Push the crown again in to the ultimate place. It will lock the crown in place.
Individuals Additionally Ask
How do I set the time on my Armitron digital watch?
Depress the small button beneath 6:00 to show the seconds. Press the underside button beneath 2:00 to clear the flashing seconds to 00. Press the crown to advance the hours and press the underside button beneath 2:00 to advance the minutes.
How do I alter the battery in my Armitron watch?
Flip the watch over and find the 4 small screws on the again of the case. Use a small screwdriver to take away the screws and elevate off the again of the case. Take away the previous battery and insert the brand new battery, ensuring that the optimistic (+) aspect of the battery is going through up. Change the again of the case and tighten the screws.
