Changing a fan in your Asus GL-753V gaming laptop computer is usually a daunting job, however with the best directions, it may be carried out comparatively simply. You do not should be an expert restore technician, and you do not want any particular instruments, only a set of screwdrivers and some minutes of your time.
To start, you may must take away the again panel of your laptop computer. To do that, merely unscrew the screws which are holding it in place and raise it off. As soon as the again panel is eliminated, you’ll see the fan. It is often positioned close to the middle of the laptop computer, and it is often held in place by 4 screws. Unscrew these screws and punctiliously raise the fan out of its housing.
Now, you may want to put in the brand new fan. Merely place the brand new fan within the housing and tighten the screws that maintain it in place. Watch out to not overtighten the screws, or you would injury the fan. As soon as the brand new fan is put in, you’ll be able to put the again panel again in your laptop computer and screw it into place. Now, your laptop computer needs to be working cooler and quieter.
Figuring out Fan Failure
The Asus GL-753V is a strong gaming laptop computer that requires sufficient cooling to keep up optimum efficiency. In case your laptop computer is experiencing overheating points, it is important to find out if the fan is functioning accurately. This is an in depth information that will help you establish fan failure:
1. Bodily Examination
Visible Inspection: Examine the fan blades for any bodily injury, akin to cracks, unfastened blades, or particles accumulation. A broken fan could produce rattling or grinding noises.
Guide Rotation: Gently rotate the fan blades along with your finger to test for smoothness. The blades ought to spin freely with none obstructions. If the fan feels stiff or resists motion, it could point out a bearing concern.
Listening Take a look at: Energy on the laptop computer and pay attention attentively to the fan space. A wholesome fan ought to produce a constant airflow sound at a average quantity. In case you hear uncommon noises, akin to loud grinding or rattling, it is a signal of potential fan failure.
| Commentary | Doable Fan Failure Signs |
|---|---|
| Visible Inspection | Cracks, unfastened blades, particles accumulation |
| Guide Rotation | Stiffness, resistance to motion |
| Listening Take a look at | Loud grinding, rattling, extreme fan noise |
Getting ready for the Alternative
Earlier than making an attempt the substitute, collect the required instruments and supplies:
* A small Phillips-head screwdriver
* A set of substitute followers (particularly designed for the Asus GL-753V mannequin)
* A non-abrasive cleansing fabric
* A cooling pad or elevated floor for the laptop computer
* A pair of ESD-safe gloves (non-obligatory however advisable)
Step-by-Step Elimination
1. Be sure that the laptop computer is powered off and disconnected from all exterior gadgets.
2. Flip the laptop computer the other way up and take away the underside cowl utilizing the Phillips-head screwdriver. Find the followers, that are sometimes located on the backside of the laptop computer chassis.
3. Fastidiously disconnect the fan energy connectors from the motherboard. Word the orientation of the connectors for correct reassembly.
4. Take away the screws that safe the followers to the chassis.
5. Gently raise the followers out of their housing.
6. Use a non-abrasive cleansing fabric to take away any mud or particles from the fan housing and the encircling space. It will assist stop any buildup that would have an effect on the brand new followers’ efficiency.
Disassembling the Laptop computer
To entry the fan in your Asus GL-753v, you may must disassemble the laptop computer. Listed here are the steps to do that:
- Energy off the laptop computer and unplug it from any energy sources.
- Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer.
- Take away the screws from the underside of the laptop computer. There might be a number of screws, so watch out to not miss any.
- As soon as all of the screws are eliminated, you’ll be able to rigorously pry the underside cowl off the laptop computer. Watch out to not injury the quilt or any of the parts contained in the laptop computer.
Disconnecting the Fan
After you have the underside cowl off, you may must disconnect the fan. Listed here are the steps to do that:
- Find the fan. Will probably be a small, sq. part with a wire connected to it.
- Disconnect the wire from the fan by gently pulling on the connector. Watch out to not injury the connector or the wire.
- As soon as the wire is disconnected, you’ll be able to take away the fan by unscrewing the screws that maintain it in place.
| Steps | Description |
|---|---|
| 1 | Energy off the laptop computer and unplug it from any energy sources. |
| 2 | Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer. |
| 3 | Take away the screws from the underside of the laptop computer. There might be a number of screws, so watch out to not miss any. |
| 4 | As soon as all of the screws are eliminated, you’ll be able to rigorously pry the underside cowl off the laptop computer. Watch out to not injury the quilt or any of the parts contained in the laptop computer. |
| 5 | Find the fan. Will probably be a small, sq. part with a wire connected to it. |
| 6 | Disconnect the wire from the fan by gently pulling on the connector. Watch out to not injury the connector or the wire. |
| 7 | As soon as the wire is disconnected, you’ll be able to take away the fan by unscrewing the screws that maintain it in place. |
Finding the Defective Fan
To establish the defective fan, observe these steps:
-
Hearken to fan noises: When a fan begins to fail, it usually makes uncommon noises, akin to rattling, buzzing, or clicking.
-
Examine fan vibration: Place your hand on the again of the laptop computer close to the fan vents. If the laptop computer vibrates excessively, it may point out a defective fan.
-
Use diagnostic software program: Run a laptop computer diagnostic program that may detect fan speeds and temperatures. If a fan will not be spinning accurately or is overheating, the software program will establish it.
-
Detailed Fan Inspection:
-
Disconnect the laptop computer from the facility outlet.
-
Take away the underside panel of the laptop computer. This often entails unscrewing a number of screws.
-
Find the cooling system. It sometimes consists of warmth pipes, a warmth sink, and a number of followers.
-
Determine the defective fan. Look at the followers for any seen injury, akin to damaged blades, unfastened wires, or extreme mud accumulation.
-
Examine fan rotation. Gently attempt to rotate the fan blades. If a fan is caught or rotates with issue, it’s seemingly defective.
-
Measure fan voltage and present. You probably have a multimeter, you’ll be able to measure the voltage and present equipped to the fan. If the readings are considerably totally different from the specs, it signifies {an electrical} concern with the fan.
-
Examine cooling vents. Make sure the cooling vents on the laptop computer’s exterior are away from any blockages, akin to mud or particles.
-
Detaching the Outdated Fan
In an effort to detach the outdated fan, you will have to take away all of the screws securing it to the laptop computer casing. As soon as the screws have been eliminated, you’ll be able to rigorously raise the fan out of the casing. Watch out to not injury any of the wires or parts connected to the fan.
Step 1: Find the Fan
The fan is usually positioned within the backside of the laptop computer casing. Will probably be lined by a plastic shroud that you will want to take away earlier than you’ll be able to entry the fan.
Step 2: Take away the Screws
The fan is usually secured to the casing by 4 screws. Find these screws and take away them utilizing a screwdriver.
Step 3: Raise the Fan Out
As soon as the screws have been eliminated, you’ll be able to rigorously raise the fan out of the casing. Watch out to not injury any of the wires or parts connected to the fan.
Step 4: Disconnect the Wires
The fan is usually related to the motherboard by two wires. Disconnect these wires from the motherboard.
Step 5: Take away the Fan
As soon as the wires have been disconnected, you’ll be able to utterly take away the fan from the laptop computer.
| Screw Location | Variety of Screws |
|---|---|
| Entrance of Fan | 2 |
| Again of Fan | 2 |
Putting in the New Fan
With the outdated fan eliminated, it is time to set up the brand new one. Fastidiously align the brand new fan with the mounting holes on the heatsink. The fan ought to match snugly into place. As soon as the fan is aligned, safe it with the screws that had been eliminated earlier. Make sure to tighten the screws securely, however don’t overtighten them.
Changing the Thermal Paste
Earlier than putting in the brand new fan, it’s a good suggestion to interchange the thermal paste that was utilized to the heatsink. Thermal paste helps to conduct warmth away from the CPU and into the heatsink. Over time, thermal paste can dry out and grow to be much less efficient. Changing the thermal paste will assist to make sure that the brand new fan is ready to cool the CPU successfully.
To switch the thermal paste, merely apply a small quantity of latest thermal paste to the middle of the heatsink. Use a cotton swab or your finger to unfold the thermal paste evenly over the floor of the heatsink. As soon as the thermal paste is utilized, rigorously place the brand new fan on prime of the heatsink.
Reconnecting the Wires
The following step is to reconnect the wires to the brand new fan. The fan could have two wires, a crimson wire and a black wire. The crimson wire needs to be related to the optimistic terminal on the motherboard, and the black wire needs to be related to the destructive terminal. As soon as the wires are related, the fan ought to begin spinning.
Testing the Fan
As soon as the brand new fan is put in and the wires are related, you will need to check the fan to be sure that it’s working correctly. To check the fan, merely boot up the pc and enter the BIOS. Within the BIOS, you must be capable of see the fan pace. The fan pace needs to be round 2000 RPM. If the fan pace will not be round 2000 RPM, then the fan will not be working correctly and you must troubleshoot the issue.
Reassembling the Laptop computer
As soon as the brand new fan is put in, it is time to reassemble the laptop computer. Observe these steps in reverse order of the disassembly course of:
7. Substitute the Motherboard
Fastidiously align the motherboard with the bottom of the laptop computer and gently decrease it into place. Be sure that all of the connectors and ports are correctly aligned.
Safe the motherboard utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might injury the motherboard.
Substitute the battery connector on the motherboard by gently pushing down on either side of the connector till it snaps into place.
Reattach the keyboard connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Reconnect the touchpad connector in the identical method because the keyboard connector.
Substitute the Wi-Fi card connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the webcam connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the audio jack connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the facility button connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Substitute the USB port connectors by aligning them with the ports on the motherboard and gently pushing them down till they click on into place.
Reattach the HDMI port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the Ethernet port connector by aligning it with the port on the motherboard and gently urgent it down till it clicks into place.
Substitute the VGA port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the SATA connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the M.2 SSD connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the CMOS battery by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the CPU heatsink by aligning it with the CPU socket on the motherboard and gently urgent down till it clicks into place.
Safe the CPU heatsink utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might injury the CPU.
Verifying Profitable Alternative
Step 8: Re-Set up the Again Panel and Battery
As soon as the fan has been efficiently changed, it is important to re-install the again panel and battery to finish the restore. Observe these detailed steps rigorously to make sure correct set up:
- Align the again panel with the chassis of the laptop computer, making certain that every one tabs and slots are in place.
- Gently press across the edges of the again panel to safe it into place. Make sure that it’s firmly seated and there aren’t any gaps or misalignments.
- Retrieve the battery from a protected storage location.
- Slide the battery again into its designated compartment inside the laptop computer.
- Safe the battery by sliding the latch or lever into the locked place.
Guaranteeing Performance
After reassembling the laptop computer, it is essential to confirm that the brand new fan is functioning accurately. Energy on the system and observe the next:
- Examine for Noise Discount: Hear attentively for any uncommon noises or rattling sounds coming from the fan. A correctly put in fan ought to function easily and quietly.
- Monitor System Temperatures: Use a temperature monitoring software program or utility to trace the CPU and GPU temperatures. The temperatures needs to be inside regular working ranges.
- Run a Stress Take a look at: Run a stress check software or benchmark to place the laptop computer underneath load. It will check the fan’s means to successfully dissipate warmth and keep optimum temperatures.
If all these checks are passable, you might have efficiently changed the fan in your Asus GL-753v and restored it to its optimum efficiency.
Troubleshooting Ideas
In case you encounter any points whereas altering out the fan in your ASUS GL-753V, listed below are some troubleshooting suggestions:
9. Examine the Fan Blades
Totally examine the fan blades for any injury, akin to cracks or bent sections. Broken blades can create an imbalance whereas spinning, inflicting extreme noise or decreased airflow. If any injury is current, substitute the fan with a brand new one.
To test the fan blades for injury, maintain the fan in your hand and rotate it slowly. Search for any seen cracks or bends within the blades. In case you discover any injury, substitute the fan.
You may also use a flashlight to examine the fan blades for injury. Shine the flashlight by the blades and search for any cracks or bends. In case you discover any injury, substitute the fan.
In case you are not sure whether or not or not the fan blades are broken, you’ll be able to take the pc to a certified technician for additional inspection.
| Injury | Impact | Resolution |
|---|---|---|
| Cracked blades | Extreme noise, decreased airflow | Substitute fan |
| Bent blades | Imbalance whereas spinning, decreased airflow | Substitute fan |
Security Precautions
Earlier than you start, you will need to observe these security precautions to make sure your security and forestall injury to your Asus GL-753V:
- Unplug your laptop computer from any energy supply and take away the battery.
- Put on anti-static gloves or a wrist strap to stop electrostatic discharge (ESD).
- Use a clear and well-lit workspace.
- Deal with the fan with care to keep away from injury.
- Don’t contact the fan blades or the copper coils.
- Don’t try and restore the fan your self in case you are not comfy doing so.
- In case you are not sure about any of the steps, seek the advice of a certified technician.
- Get rid of the outdated fan correctly.
- Wash your arms totally after dealing with the fan.
- Permit the laptop computer to chill down utterly earlier than reassembling it.
10. Putting in the New Fan
As soon as the outdated fan is eliminated, it’s time to set up the brand new fan. To do that, observe these steps:
- Align the brand new fan with the fan header on the motherboard.
- Gently press down on the fan till it clicks into place.
- Join the fan cable to the motherboard.
- Safe the fan with the screws offered.
- Reassemble the laptop computer.
As soon as the laptop computer is reassembled, plug it again into energy and switch it on. The brand new fan ought to now be functioning correctly.
Change Out a Fan in My ASUS GL-753V
The ASUS GL-753V is a gaming laptop computer that’s recognized for its highly effective efficiency and glossy design. Nonetheless, like all laptops, it’s prone to overheating, which might result in decreased efficiency and even injury to the laptop computer. One of the frequent causes of overheating is a defective fan, which could be simply changed by following these steps:
- Energy down the laptop computer and unplug it from the facility outlet.
- Flip the laptop computer over and take away the screws that maintain the underside panel in place.
- As soon as the panel is eliminated, find the fan and disconnect the facility cable.
- Unscrew the fan from the laptop computer and take away it.
- Substitute the outdated fan with the brand new fan and screw it into place.
- Reconnect the facility cable to the fan.
- Substitute the underside panel and screw it into place.
Folks Additionally Ask
Why is my ASUS GL-753V overheating?
There are a number of the explanation why your ASUS GL-753V could also be overheating. A few of the most typical causes embrace:
- A defective fan
- A clogged air vent
- A excessive ambient temperature
- A demanding workload
How can I stop my ASUS GL-753V from overheating?
There are a number of issues you are able to do to stop your ASUS GL-753V from overheating, together with:
- Hold the air vents clear and away from any obstructions.
- Use the laptop computer in a cool, well-ventilated surroundings.
- Keep away from putting the laptop computer on a delicate floor, akin to a blanket or pillow, which might block the air vents.
- Scale back the workload on the laptop computer by closing any pointless applications or tabs.
- Think about using a cooling pad to assist dissipate warmth from the laptop computer.
The place can I discover a substitute fan for my ASUS GL-753V?
You could find a substitute fan in your ASUS GL-753V from a number of on-line retailers, together with Amazon, Newegg, and eBay. Make sure to buy a fan that’s suitable along with your particular laptop computer mannequin.
