Routine upkeep performs a vital function in guaranteeing the longevity and optimum efficiency of your car. Amongst these duties, altering the oil stands as a elementary necessity that shouldn’t be neglected. Whether or not you favor the comfort of knowledgeable or the satisfaction of DIY upkeep, this complete information will empower you with the data and step-by-step directions to alter the oil in your 2010 Ford F150 successfully and effectively.
Earlier than delving into the precise steps, it’s crucial to collect the required instruments and supplies. You’ll require a brand new oil filter, the advisable quantity of motor oil (verify your proprietor’s handbook for the precise amount), an oil drain pan, a funnel, a socket wrench or adjustable wrench, and gloves for cover. After you have assembled these things, you may proceed with the oil change course of with confidence.
To start, find the drain plug on the oil pan and place the drain pan straight beneath it. Use the socket wrench or adjustable wrench to loosen the drain plug and permit the used oil to empty into the pan. Whereas the oil is draining, take the chance to find and take away the oil filter utilizing the suitable wrench. Apply a skinny layer of contemporary oil to the gasket of the brand new filter earlier than screwing it into place by hand. As soon as hand-tight, use the wrench to additional tighten the filter by roughly three-quarters of a flip.
Gathering Supplies
Earlier than embarking on the oil change course of on your 2010 Ford F150, it is essential to collect all the required supplies, guaranteeing a clean and environment friendly activity.
To facilitate your preparations, here is a complete listing of things you will want:
- Recent Engine Oil: Choose the sort and amount of oil laid out in your car’s proprietor’s handbook. Sometimes, a 2010 F150 requires roughly 6 quarts.
- New Oil Filter: Buy a substitute oil filter designed on your F150’s engine. It performs an important function in eradicating contaminants from the oil.
- Oil Filter Wrench: This specialised wrench will present the required leverage to loosen and tighten the oil filter.
- Drain Pan: A big, low-profile drain pan is important for amassing the used oil. Think about selecting one with a capability of at the very least 7 quarts.
- Funnel: A funnel will help you in pouring the brand new oil into the engine with out spillage or mess.
- Rags or Paper Towels: Hold a provide of rags or paper towels useful to wipe up any spills or clear your fingers.
- Security Gloves: Shield your fingers from the recent oil by sporting a pair of nitrile or latex gloves.
- Security Glasses: Protect your eyes from any potential splashes of oil by sporting security glasses.
- Torque Wrench (Optionally available): Whereas not necessary, a torque wrench can assist make sure the oil filter is tightened to the producer’s specs.
Security Precautions
Earlier than trying the oil change, adhere to those security precautions to stop any incidents:
- Park on a Degree Floor: Guarantee your F150 is parked on a steady and degree floor to stop any unintended motion.
- Interact the Parking Brake: Activate the parking brake to safe the car in place.
- Enable Engine to Cool: Wait a number of hours after driving to permit the engine to chill down, stopping burns from sizzling oil.
- Put on Protecting Gear: Use gloves and security glasses to guard your self from oil contact.
- Correct Disposal: Acquire the used oil and filter responsibly to keep away from environmental contamination. Contact your native recycling middle for correct disposal strategies.
Finding the Oil Pan and Drain Plug
Discovering the Oil Pan
The oil pan is a big, flat metallic pan situated on the backside of the engine. It collects the oil that drips down from the engine and shops it till it may be pumped again as much as the engine. To search out the oil pan, look below the entrance of the engine. Will probably be the bottom level on the engine and shall be lined by a metallic defend or plate.
Figuring out the Drain Plug
After you have discovered the oil pan, you have to determine the drain plug. The drain plug is a small bolt situated on the backside of the oil pan. It’s normally made from metallic and has a washer round it. To take away the drain plug, you will have a wrench.
Draining the Previous Oil
1. Put together your supplies: Collect your supplies, together with new oil, an oil filter, an oil filter wrench, a 15mm socket wrench or a 15mm wrench, and a drain pan.
2. Find the oil drain plug: Park your F150 on a degree floor and safe the parking brake. Find the oil drain plug, which is often discovered on the underside of the oil pan. It can normally be a 15mm bolt.
3. Drain the oil: Place your drain pan below the oil drain plug and use the 15mm socket wrench or wrench to rigorously loosen the plug. Be cautious, because the oil will begin to drain out instantly. Enable the oil to empty utterly into the pan. This could take 10-Quarter-hour.
| Tip: |
|---|
| Use a funnel to switch the outdated oil from the drain pan into an empty oil container for correct disposal. |
4. Change the oil drain plug: As soon as the oil has stopped draining, use the wrench to hand-tighten the oil drain plug again into place. Don’t overtighten.
5. Take away the outdated oil filter: Find the oil filter, which is normally discovered close to the highest of the engine. Use the oil filter wrench to rigorously loosen the filter. It can comprise some oil, so be aware and maintain a rag close by to catch any spills.
Changing the Oil Filter
The oil filter performs a vital function in protecting your engine clear by trapping contaminants from the oil. It is advisable to interchange the filter each time you alter the oil.
This is how one can do it:
- Find the oil filter cap below the engine. It is normally a spherical, black cap with a big nut.
- Use an oil filter wrench or a 36 mm socket to loosen and take away the cap.
- Extract the outdated filter. Will probably be soaked with oil, so watch out to not spill any.
- Lubricate the O-ring on the brand new filter with clear oil. It will assist create a seal and stop leaks.
- Set up the brand new filter by hand-tightening it onto the engine. Use a wrench to cosy it up one other 3/4 to 1 full flip. Do not overtighten it.
- Change the oil filter cap and hand-tighten it. Use a wrench to provide it an additional 1/4 flip for a safe match.
| Substitute Frequency: | Each oil change |
|---|---|
| Oil Filter Measurement: | FL-820S (advisable) or equal |
| Tightening Torque: | 18-25 lb-ft |
Tightening the Drain Plug and Oil Filter
Step 4: Tightening the Drain Plug
As soon as the oil has completed draining, rigorously wipe away any residual oil from the drain plug and oil pan floor. Apply a skinny bead of latest oil to the threads of the drain plug and hand-tighten it again into the oil pan.
Utilizing a torque wrench, tighten the drain plug to the required torque as indicated within the car’s service handbook. Overtightening can harm the threads, so it is essential to comply with the advisable torque.
Step 5: Tightening the Oil Filter
Apply a skinny layer of latest oil to the gasket of the brand new oil filter utilizing your finger. Screw the oil filter onto the threaded adapter by hand, guaranteeing it meets snugly.
Utilizing an oil filter wrench or your hand, tighten the oil filter additional. Keep away from overtightening, as it might crush the gasket and result in oil leaks. Check with the car’s service handbook for the advisable filter tightening torque.
As soon as the drain plug and oil filter are securely tightened, add new oil to the engine as specified within the car’s consumer handbook. Examine the oil degree and alter accordingly.
Oil Filter Tightening Torques by Engine Sort
| Engine Sort | Oil Filter Tightening Torque |
|---|---|
| 5.4L V8 | 27 ft-lbs |
| 4.6L V8 | 25 ft-lbs |
| 6.2L V8 | 30 ft-lbs |
Resetting the Oil Life Indicator
As soon as you have changed the oil and filter, you have to reset the oil life indicator. It will let your car know that you have modified the oil and reset the countdown to your subsequent oil change. This is how one can do it:
-
Flip the ignition key to the “On” place with out beginning the engine.
-
Press and maintain the “Journey/Reset” button on the instrument cluster till the “Oil Life Reset” menu seems.
-
Use the arrow buttons on the steering wheel to navigate to the “Reset Oil Life” choice.
-
Press the “OK” button to verify the reset.
-
The oil life indicator shall be reset to 100%.
- Security glasses
- Gloves
- Funnel
- Oil pan
- 15mm wrench
- Oil filter wrench
- Place the oil pan below the oil drain plug.
- Use the wrench to loosen the oil drain plug and permit the oil to empty into the pan.
- Enable the oil to empty utterly, which can take a number of minutes.
- As soon as the oil has drained, tighten the oil drain plug again into the oil pan.
- Clear up any spilled oil across the drain plug space.
- Get rid of the outdated oil and filter correctly.
- Reset the oil life monitor system.
- Double-check the oil degree utilizing the dipstick to make sure it is crammed to the suitable degree.
- Begin the engine and let it run for a couple of minutes to flow into the brand new oil.
- Examine for any leaks across the oil filter and drain plug space.
- Collect your supplies. You’ll need new oil, a brand new oil filter, a wrench, a funnel, and a drain pan.
- Find the oil drain plug. It’s situated on the underside of the oil pan and is normally a 17mm bolt.
- Place the drain pan below the oil drain plug and loosen the plug with the wrench. Watch out to not drop the plug into the pan.
- Enable the oil to empty into the pan. This may increasingly take a couple of minutes.
- As soon as the oil has drained, change the oil drain plug and tighten it with the wrench.
- Find the oil filter. It’s normally situated on the highest of the engine and is a cylindrical-shaped part.
- Use the wrench to loosen the oil filter and take away it from the engine. Watch out to not spill any oil.
- Apply a skinny coat of latest oil to the gasket of the brand new oil filter.
- Screw the brand new oil filter onto the engine and tighten it with the wrench.
- Add new oil to the engine via the oil filler cap. The quantity of oil you have to add will depend upon the engine measurement. Examine the proprietor’s handbook for the precise quantity.
- Examine the oil degree with the dipstick and add extra oil if mandatory.
- Reset the oil life monitor. You are able to do this by following the directions within the proprietor’s handbook.
This is a extra detailed clarification of step 7:
Urgent the “OK” Button
Whenever you press the “OK” button, you will note a affirmation message on the instrument cluster. This message will ask you to verify that you just need to reset the oil life indicator. In case you are certain that you just need to reset it, press the “OK” button once more. The oil life indicator shall be reset to 100% and the countdown to your subsequent oil change will begin over.
It is very important notice that resetting the oil life indicator doesn’t imply that you may prolong the interval between oil modifications. The oil in your car nonetheless must be modified on the advisable intervals, which usually vary between 3,000 and 5,000 miles.
Checking for Leaks
Earlier than you alter the oil, it is necessary to verify for any leaks within the oil pan, drain plug, or oil filter. It will make it easier to determine any potential points early on and stop them from turning into a serious downside later.
Step 1: Collect Your Instruments
You’ll need the next instruments:
Step 2: Security First
As with all automotive restore activity, it is necessary to put on security glasses and gloves when altering your oil. These will defend you from sizzling oil and from any particles which will fall into the engine bay.
Step 3: Find the Oil Pan and Drain Plug
The oil pan is often situated on the backside of the engine. It’s a metallic pan that holds the oil. The drain plug is a small bolt that’s situated on the backside of the oil pan. It’s used to empty the oil from the engine.
Step 4: Place the Oil Pan Below the Drain Plug
Place the oil pan below the drain plug. Remember to place it ready the place it should catch the entire oil that drains out.
Step 5: Loosen the Drain Plug
Use the 15mm wrench to loosen the drain plug. Watch out to not overtighten the drain plug.
Step 6: Enable the Oil to Drain
Enable the oil to empty into the oil pan. This may increasingly take a number of minutes.
Step 7: Tighten the Drain Plug
As soon as the oil has drained, use the 15mm wrench to tighten the drain plug. Remember to tighten the drain plug snugly.
Step 8: Examine for Leaks
Begin the engine and let it run for a couple of minutes. Examine for any leaks across the oil pan and drain plug. If you happen to see any leaks, tighten the drain plug or oil pan as mandatory.
Correct Oil Disposal
Disposing of engine oil and filters correctly is essential for environmental safety and your well being. This is how one can do it responsibly:
1. Acquire Waste Oil and Filters
Drain the used oil from the car right into a clear container. Acquire the outdated oil filter in a separate container.
2. Discover a Drop-Off Location
Native auto components shops, recycling facilities, and dangerous waste amenities typically settle for used oil and filters. Examine along with your native municipality for licensed drop-off factors.
3. Transport Safely
Securely seal the containers holding the waste oil and filters. Transport them rigorously to the drop-off location in an upright place to stop spills.
4. Examine for Expenses
Some drop-off places might cost a small price for disposal. Inquire forward to keep away from any surprises.
5. Recycle Used Oil
Used oil will be recycled into new merchandise, resembling heating oil and asphalt. By recycling, you assist preserve pure sources and cut back waste.
6. Correct Oil Filter Disposal
Oil filters comprise hazardous waste and shouldn’t be disposed of in landfills. Drop them off at licensed recycling facilities or auto components shops.
7. EPA Rules
The Environmental Safety Company (EPA) regulates hazardous waste disposal. Observe their pointers to make sure correct dealing with and disposal of used oil and filters.
8. Automobile Battery Disposal
Whereas this text focuses on oil disposal, it is necessary to notice that car batteries additionally require particular disposal. Examine along with your native recycling middle for licensed battery drop-off places.
9. Frequent Oil Disposal Errors
Keep away from these frequent errors when disposing of oil and filters:
| Errors | Penalties |
|---|---|
| Pouring oil down the drain | Contaminates water techniques |
| Dumping filters within the trash | Leaches hazardous waste into the atmosphere |
| Storing oil improperly | Threat of spills and fires |
Really useful Upkeep Schedule
To make sure your 2010 Ford F150 runs easily, it is essential to comply with the advisable upkeep schedule. This is a breakdown of the advisable service intervals:
| Service | Mileage |
|---|---|
| Oil and Filter Change | 5,000 miles or 6 months |
| Tire Rotation | 7,500 miles or 6 months |
| Air Filter Substitute | 15,000 miles or 12 months |
| Spark Plug Substitute | 60,000 miles |
| Gasoline Filter Substitute | 30,000 miles |
10. Eradicating the Previous Oil
To empty the outdated oil, comply with these steps:
Find out how to Change the Oil in a 2010 Ford F150
Altering the oil in your 2010 Ford F150 is a comparatively easy process that may be accomplished in about half-hour. Listed below are the steps you have to comply with:
Folks Additionally Ask About Find out how to Change the Oil in a 2010 Ford F150
What sort of oil ought to I take advantage of in my 2010 Ford F150?
The kind of oil it is best to use in your 2010 Ford F150 will depend upon the engine measurement. For many engines, a 5W-20 artificial oil is advisable.
How typically ought to I alter the oil in my 2010 Ford F150?
The oil in your 2010 Ford F150 ought to be modified each 5,000 to 7,500 miles, or extra regularly should you drive in extreme situations.
Can I alter the oil in my 2010 Ford F150 myself?
Sure, it’s attainable to alter the oil in your 2010 Ford F150 your self. Nevertheless, it is very important comply with the steps outlined within the proprietor’s handbook and to make use of the right instruments and supplies.
How a lot does it price to alter the oil in a 2010 Ford F150?
The price of altering the oil in a 2010 Ford F150 will differ relying on the situation and the kind of oil used. Nevertheless, you may anticipate to pay between $30 and $60 for the oil and filter.
