Think about the comfort of effortlessly sliding your Ford seat backwards and forwards to accommodate totally different drivers or cargo wants. Putting in an additional Ford seat L monitor can rework your automobile right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, guaranteeing a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to boost your driving expertise with this invaluable improve. Embark on this journey to unlock the total potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You may want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L monitor. Along with your arsenal of sources prepared, you’ll be able to proceed with confidence. Step one entails eradicating the prevailing seat out of your automobile. Fastidiously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you may have clear entry to the world the place the additional L monitor will probably be put in.
Now comes the exact set up of the additional Ford seat L monitor. Place the L monitor onto the seat base and align it precisely with the prevailing monitor. Safe the L monitor firmly utilizing the supplied self-tapping screws. Make sure the screws are adequately tightened to stop any motion or rattling throughout use. As soon as the L monitor is securely fixed, rigorously reinstall the seat into your automobile. Reconnect the wiring harness and bolt the seat again into its authentic place. With these steps meticulously adopted, you’ve got efficiently put in the additional Ford seat L monitor, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Present L Observe
To start, find the prevailing L monitor in your Ford automobile. That is the monitor that the seat rails slide backwards and forwards on. It’s sometimes positioned below the seat, and it could be lined by a plastic or metallic trim panel. If you’re having hassle discovering the L monitor, seek the advice of your automobile’s proprietor’s handbook or seek for diagrams on-line.
After you have positioned the prevailing L monitor, you have to to find out how a lot further monitor you must set up. It will depend upon the kind of seat you might be putting in and the quantity of adjustment you need. Usually talking, you have to so as to add no less than 12 inches of monitor to every aspect of the seat.
Here’s a desk of measurements and options for a way a lot further L monitor it’s possible you’ll want:
| Seat Sort | Further L Observe Wanted |
|---|---|
| Customary bench seat | 12 inches per aspect |
| Bucket seat | 18 inches per aspect |
| Racing seat | 24 inches per aspect |
After you have decided how a lot further monitor you want, you should buy the suitable monitor on-line or out of your native auto elements retailer.Assembling the Additional L Observe
Step 1: Collect Supplies
You will have the next supplies:
- Additional L monitor
- L monitor mounting bolts
- Socket wrench
Step 2: Put together the L Observe
Measure and mark the places for the mounting bolts on the L monitor. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Be sure that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Dimension |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Observe to the Automobile
Align the L monitor with the mounting holes on the automobile. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Be sure that the L monitor is securely hooked up.
Aligning and Attaching the L Observe
As soon as the L monitor is reduce to the proper size, you will need to align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L monitor on the ground alongside the specified alignment.
- Examine for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the automobile’s body.
- Mark the placement of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked places utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L monitor with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, guaranteeing they’re securely fixed.
| Materials | Amount | Size |
|---|---|---|
| L Observe | 2 | As per automobile necessities |
| Mounting Bolts | 8-10 (per L monitor) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat will probably be securely fixed to the L-track. To tighten the bolts, you have to a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this could injury the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Observe
Reinforcing the L monitor is an important step to make sure the soundness and sturdiness of your aftermarket seat set up. Here is an in depth information that will help you reinforce the L monitor:
Supplies Required
| Element | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the prevailing weld nuts or mounting factors on the automobile’s ground the place the unique seat monitor was hooked up. These factors will function the reinforcement factors.
- Measure and Reduce Flat Bars: Reduce two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the automobile’s ground.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the prevailing L monitor. Be sure that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Observe: Place the L monitor over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the beneficial torque specs.
- Further Issues: In sure circumstances, equivalent to for heavy-duty purposes or for putting in aftermarket seats with a big weight capability, it’s possible you’ll want so as to add further assist by welding the flat bars to the automobile’s ground. Seek the advice of with a certified automotive skilled for correct welding directions.
Putting in the Seat on the L Observe
As soon as the L monitor is put in, you’ll be able to start putting in the seat. To do that, you have to to:
- Align the seat with the L monitor. Be sure that the seat is dealing with the proper course and that the entrance of the seat is aligned with the entrance of the L monitor.
- Elevate the seat onto the L monitor. Fastidiously raise the seat onto the L monitor and be sure that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to be sure that it strikes easily alongside the L monitor.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L monitor.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Modify the Seat Place
As soon as the seat is put in, you’ll be able to modify the seat place to your liking. To do that, you should utilize the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This consists of putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is often included with the seat, however it’s possible you’ll must buy it individually if you’re putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you have to to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you have to to:
Adjusting the Seat Place
To regulate the seat place, comply with these steps:
- Find the seat adjustment levers. These are normally positioned on the aspect of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Increase or decrease the seat cushion. To do that, pull up on the lever positioned on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever positioned on the rear of the seatback.
- Modify the lumbar assist. To do that, flip the knob positioned on the aspect of the seat.
- Modify the headrest. To do that, pull up on the lever positioned on the high of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Characteristic | Modify |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Increase or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Modify lumbar assist | Flip knob on aspect of seat |
| Modify headrest | Pull up on lever at high of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe sneakers to reduce the chance of damage.
- Disconnect the Battery: Disconnect the detrimental terminal of your battery to stop electrical hazards through the set up.
- Park on a Degree Floor: Park your automobile on a flat, steady floor to make sure it stays stationary all through the method.
- Assist the Seat: Make the most of a jack stand or different appropriate assist to stop the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every activity, together with a socket wrench, torque wrench, and drill.
- Comply with Directions Fastidiously: Consult with the producer’s directions or a good on-line information to make sure correct set up.
- Examine Tightness Often: As soon as put in, periodically examine the tightness of all bolts and screws to take care of security.
- Safe L Observe: Make sure the L monitor is securely hooked up to the ground or brackets utilizing the desired bolts and torque settings.
- Reattach Seat: Fastidiously reattach the seat to the L monitor, guaranteeing it slides easily and locks into place securely.
9. Examine Alignment and Tighten Bolts
Examine the alignment of the newly put in L monitor to make sure it’s parallel to the prevailing monitor. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the desired torque values utilizing a torque wrench. This step ensures the L monitor stays firmly in place and the seat might be adjusted easily and safely.
Troubleshooting Widespread Points
In case you encounter any points whereas putting in the additional Ford seat L monitor, examine the next troubleshooting steps:
1. Observe Alignment
Be sure that the brand new L monitor is correctly aligned with the prevailing one. Misalignment can forestall the seats from sliding easily.
2. Bolt Tightening
Confirm that every one bolts are securely tightened. Unfastened bolts may cause rattling and instability.
3. Particles Elimination
Examine the monitor for any particles or grime. Clear it totally to stop interference with seat motion.
4. Seat Compatibility
Affirm that the seats you propose to make use of are suitable with the L monitor system. Incompatible seats could not match appropriately.
5. Rail Extension
If you must prolong the monitor size, use suitable rail extension brackets. Improper extension can weaken the monitor power.
6. Lubrication
Apply a skinny layer of lubricant to the monitor to cut back friction and enhance seat sliding.
7. Wiring Obstructions
Be sure that there are not any wiring harnesses or cables obstructing the monitor path. Keep away from injury throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting strategies to keep away from damage.
9. Device Necessities
Have all crucial instruments out there, together with a socket wrench, drill, and acceptable fasteners.
10. Search Skilled Help
In case you encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Additional Ford Seat L Observe
To put in further Ford seat L monitor, you have to the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L monitor
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
After you have gathered the entire crucial instruments and supplies, you’ll be able to comply with these steps to put in the brand new seat L monitor:
1. Take away the outdated seat L monitor. To do that, you have to to take away the 4 bolts that safe the seat L monitor to the seat body. As soon as the bolts are eliminated, you’ll be able to raise the seat L monitor off of the seat body.
2. Clear the seat body. As soon as the outdated seat L monitor is eliminated, you have to to wash the seat body. It will assist to make sure that the brand new seat L monitor is put in correctly.
3. Set up the brand new seat L monitor. To do that, you have to to position the brand new seat L monitor on the seat body. Be sure that the brand new seat L monitor is aligned correctly.
4. Safe the brand new seat L monitor. As soon as the brand new seat L monitor is aligned correctly, you have to to safe it to the seat body. To do that, you have to to insert the 4 bolts into the holes within the seat L monitor and tighten them till they’re comfortable.
5. Check the brand new seat L monitor. As soon as the brand new seat L monitor is put in, you have to to check it to be sure that it’s working correctly. To do that, you have to to take a seat within the seat and transfer the seat backwards and forwards. The seat ought to transfer easily and simply.
Individuals Additionally Ask
What’s a seat L monitor?
A seat L monitor is a metallic monitor that’s mounted to the seat body. The seat L monitor permits the seat to maneuver backwards and forwards.
How do I do know if I want to interchange my seat L monitor?
In case your seat is just not transferring easily or simply, it could be crucial to interchange the seat L monitor.
How a lot does it price to interchange a seat L monitor?
The price to interchange a seat L monitor will fluctuate relying on the make and mannequin of your automobile. Nonetheless, you’ll be able to anticipate to pay between $100 and $300 for the elements and labor.
