Featured Picture: [Image of a Ring Video Doorbell being installed on a wall]
Putting in a Ring Video Doorbell is a comparatively easy course of that may be accomplished in only a few minutes. Nevertheless, there are some things you may have to do earlier than you get began, comparable to selecting a location for the doorbell and ensuring you could have the required instruments. After getting the whole lot you want, you possibly can observe these easy steps to put in your Ring Video Doorbell:
First, you may want to decide on a location in your doorbell. The most effective place to put in a doorbell is close to your entrance door, the place it is going to be simple for guests to see and use. As soon as you’ve got chosen a location, you may have to drill a gap within the wall for the doorbell wires. As soon as the opening is drilled, you possibly can insert the wires and safe the doorbell to the wall.
Subsequent, you may want to attach the doorbell to your house’s Wi-Fi community. To do that, open the Ring app in your smartphone and observe the directions on the display screen. As soon as the doorbell is related to Wi-Fi, you can use the app to view stay video from the doorbell, obtain notifications when somebody rings the bell, and discuss to guests by the doorbell’s built-in speaker.
Getting ready Your Instruments and Supplies
Securing a Screwdriver
When deciding on a screwdriver for Ring Video Doorbell set up, go for a Phillips head screwdriver with a magnetic tip. The magnetic tip will securely maintain the screws, stopping them from falling and getting misplaced. If you do not have a screwdriver with a magnetic tip, use a neodymium magnet to magnetize an extraordinary screwdriver. Merely rub the magnet alongside the screwdriver tip a number of instances to imbue it with magnetic properties.
Gathering Important Instruments and Supplies
Along with a magnetic-tip Phillips head screwdriver, you may want the next instruments and supplies for a easy set up:
| Merchandise | Objective |
|---|---|
| Drill | Creating holes for wire routing (if mandatory) |
| Drill bits | Matching the diameter of the wires |
| Stage | Making certain the doorbell is put in straight |
| Wire strippers | Exposing wire ends for connections |
| Wire nuts | Connecting electrical wires |
| Electrical tape | Insulating wire connections |
| Ladder | Reaching excessive set up factors |
| Security glasses | Defending your eyes from particles throughout drilling |
| Ring Video DoorbellThe doorbell unit itself | |
| Mounting {hardware} | Screws and anchors for securing the doorbell |
| Set up guide | Referencing step-by-step directions |
Selecting the Finest Set up Location
Choosing the optimum set up spot in your Ring Video Doorbell is essential for its efficient functioning and your total house safety. Listed below are key components to contemplate when selecting a location:
Visibility and Discipline of View
The placement ought to present a transparent and unobstructed view of your entryway and the encircling space. Make sure that there aren’t any obstacles comparable to bushes, bushes, or fences blocking the digicam’s line of sight. A wider discipline of view lets you monitor a bigger space and detect potential intruders or guests.
Energy Supply Availability
The Ring Video Doorbell requires a continuing energy supply to function. Decide a location that has entry to both an present doorbell wiring system or a close-by electrical outlet. If wiring the doorbell to your present doorbell system, make sure that it offers ample voltage and amperage to energy the system. Alternatively, you possibly can go for a battery-powered mannequin that doesn’t require wiring however might require common recharging.
Climate Circumstances
Contemplate the climate circumstances in your location. The Ring Video Doorbell is designed to resist varied climate components, however extended publicity to excessive warmth, chilly, or moisture can have an effect on its efficiency. Select a protected space that minimizes direct daylight and isn’t vulnerable to heavy rain or snow.
Peak and Angle
The peak and angle of the doorbell’s set up will decide the optimum discipline of view. Ideally, the digicam must be positioned at a peak of 4-5 ft above the bottom, with a slight downward angle. This permits it to seize clear footage of holiday makers and any potential exercise at your step.
| Peak | Angle | Objective |
| ———– | ———– | ———– |
| 4-5 ft | Slight downward angle | Clear footage of holiday makers |
| Larger | Straight angle | Broader discipline of view |
| Decrease | Upward angle | Floor-level visibility |
Putting in the Mounting Bracket
Step 1: Select a Mounting Location
Choose a location for the mounting bracket that gives a transparent view of your entrance door and surrounding space. Contemplate the peak and angle at which you need the doorbell to be positioned for optimum visibility.
Step 2: Mark and Drill Holes
As soon as the placement is decided, use a degree to make sure the mounting bracket might be put in straight. Mark the screw holes with a pencil or marker. Use a drill with the suitable sized drill bit to create pilot holes for the screws.
Step 3: Safe Mounting Bracket
Insert the screws into the pilot holes and tighten them securely utilizing a screwdriver. Make sure the mounting bracket is firmly connected to the wall or floor.
Extra Suggestions for Step 3:
- Use anchors when mounting on drywall or different delicate surfaces to offer extra help.
- For angled surfaces, use shims or wedges to degree the mounting bracket and forestall the doorbell from tilting.
- Think about using a cordless drill or impression driver for simpler and extra environment friendly set up.
| Materials | Drill Bit Dimension |
|---|---|
| Wooden | 1/16″ |
| Brick | 3/16″ |
| Concrete | 1/4″ |
Connecting the Wires (Non-obligatory)
Connecting to present doorbell wires offers steady energy to your Ring Video Doorbell, eliminating the necessity for battery modifications. Earlier than beginning, guarantee you could have the suitable instruments and supplies, together with a screwdriver, wire strippers, and electrical tape.
Determine the 2 doorbell wires extending out of your wall. Strip roughly 1/2 inch of insulation from the ends of each wires. Insert the stripped wires into the corresponding terminals on the again of the Ring Doorbell, making certain the right polarity (purple to R and black to C). Tighten the screws to safe the connections.
Extra Concerns:
In case your present doorbell system makes use of a transformer with a voltage output of 8-24 volts AC, you possibly can join on to the wires. Nevertheless, if the transformer voltage exceeds 24 volts AC or the system makes use of a chime not designed to be used with video doorbells, you will have to put in a suitable resistor or transformer to stop harm to the Ring Doorbell.
When connecting to wires, guarantee a safe and steady connection to stop points comparable to intermittent energy or video loss. Use acceptable electrical tape or different wire connectors to safe the connections and forestall potential hazards.
| Device | Objective |
|---|---|
| Screwdriver | Tighten screw terminals |
| Wire Strippers | Take away insulation from wires |
| Electrical Tape | Safe and insulate connections |
Putting in the Doorbell Unit
1. Select a Mounting Location
Choose a spot close to your entrance door the place the doorbell can have a transparent view and might simply be reached for charging. Guarantee it is inside vary of your Wi-Fi sign.
2. Mark and Drill Pilot Holes
Mark the mounting gap areas utilizing the supplied template. Drill pilot holes at every mark, barely smaller than the screw diameter.
3. Set up the Mounting Bracket
Align the mounting bracket with the pilot holes and safe it with the included screws. Use a screwdriver or drill for a decent match.
4. Join the Ring Doorbell
Run the wires from the doorbell to the mounting bracket, following the color-coded directions. Insert the doorbell into the bracket, making certain the wires are tucked inside.
5. Stage and Safe the Doorbell
| Description | Steps |
|---|---|
| Leveling: | Use a bubble degree to make sure the doorbell is straight each vertically and horizontally. If not, loosen the adjustment screw and alter till degree. |
| Securing: | Tighten the adjustment screw to safe the doorbell firmly. Confirm that it’s safe by gently pulling on it. |
| Hiding Wires: | Tuck the surplus wires into the devoted wire channel on the mounting bracket. If mandatory, use electrical tape to safe them. |
Configuring the Doorbell with the App
Now that the Ring Video Doorbell is bodily put in, the following step is to configure it utilizing the Ring app.
- Obtain the Ring App: Seek for “Ring” within the App Retailer (iOS) or Google Play (Android) and obtain the free app.
- Create an Account: Open the app and observe the prompts to create a brand new account together with your e mail deal with and password.
- Add the Doorbell: Faucet the “Set Up a Machine” choice within the app and scan the QR code positioned on the again of the Doorbell. Alternatively, you possibly can manually enter the MAC ID.
- Configure WiFi: Join the Doorbell to your house WiFi community by getting into the SSID and password. Make sure that the Doorbell is inside vary of your wi-fi router.
- Modify Settings: Customise the Doorbell’s settings in response to your preferences. You’ll be able to alter movement sensitivity, night time imaginative and prescient, and different choices.
- Check the Doorbell: Press the Doorbell button and confirm that it rings in your cellular system. Check the movement detection by waving your hand in entrance of the Doorbell. You must obtain a notification in your telephone.
Setting Description Movement Sensitivity Adjusts the sensitivity of the movement sensor to cut back false alerts. Night time Imaginative and prescient Enhances visibility in low-light circumstances. Two-Means Discuss Lets you talk with guests by the Doorbell’s built-in microphone and speaker. Pre-Roll Buffer Reveals a quick video clip of what occurred earlier than the movement was detected.
Mounting the Doorbell on the Bracket
After securing the bracket to the wall, it is time to mount the doorbell. Observe these steps fastidiously to make sure a correct and safe set up.
Positioning the Doorbell
Maintain the doorbell in opposition to the bracket and place it the place you need it to be. Make sure the digicam is going through the specified route and that the doorbell is degree.
Sliding the Doorbell into Place
As soon as the doorbell is positioned appropriately, gently slide it upwards into the bracket. There must be audible clicks because the doorbell snaps into place.
Tightening the Screw
Use a screwdriver to tighten the screw on the high of the bracket. This screw will safe the doorbell firmly to the bracket and forestall it from falling off.
Testing the Set up
As soon as the doorbell is put in, press the button to check if it is working correctly. The doorbell ought to chime and the digicam ought to begin stay streaming.
Extra Notes:
| Tip | Description |
|---|---|
| If you happen to encounter any problem positioning or sliding the doorbell into place, don’t pressure it. Test for any obstructions or misalignments. | |
| The screw must be tightened securely however not excessively. Keep away from overtightening to stop harm to the doorbell or bracket. | |
| After tightening the screw, tug gently on the doorbell to make sure it is securely connected to the bracket. |
Testing the Doorbell’s Performance
As soon as the doorbell is put in, it is essential to confirm its performance to make sure it operates as meant. Here is an in depth information for testing the doorbell:
1. Energy Up the Doorbell
Join the doorbell to an influence supply, both by connecting it to an present doorbell wiring or utilizing the supplied battery. The standing mild on the doorbell ought to illuminate, indicating energy.
2. Obtain the Ring App
Set up the Ring app in your smartphone or pill. This app will mean you can management and monitor the doorbell remotely.
3. Set Up the Machine
Open the Ring app and observe the on-screen directions to arrange the doorbell. This course of often entails connecting the system to your Wi-Fi community.
4. Ring the Doorbell
As soon as the setup is full, press the button on the doorbell. You must hear a chime and obtain a notification in your telephone.
5. Check Movement Detection
Stroll in entrance of the doorbell’s movement sensor to set off the movement detection function. The doorbell ought to document a video clip and ship you a notification.
6. Modify Movement Settings
If the movement detection is just too delicate or not delicate sufficient, you possibly can alter the settings within the Ring app to optimize its efficiency.
7. Check Night time Imaginative and prescient
At night time or in low-light circumstances, the doorbell’s night time imaginative and prescient function ought to activate. Stroll in entrance of the doorbell at nighttime to look at the picture high quality.
8. Check Stay View and Two-Means Audio
The Ring doorbell lets you view stay footage from the digicam remotely. Faucet the Stay View button within the Ring app to entry this function. You may also use the built-in microphone and speaker to speak with guests.
| Check | Motion |
|---|---|
| Energy Up | Connect with energy and verify standing mild |
| App Setup | Set up Ring app and observe setup directions |
| Ring Bell | Press doorbell button to verify chime and notification |
| Movement Detection | Set off movement sensor and confirm recording |
| Movement Settings | Modify sensitivity and detection zones within the app |
| Night time Imaginative and prescient | Check picture high quality in low-light circumstances |
| Stay View and Two-Means Audio | Entry stay footage and talk with guests |
Troubleshooting Widespread Set up Points
Encountering difficulties together with your Ring Video Doorbell set up? Listed below are some frequent points and options that can assist you troubleshoot:
1. No Energy to the Machine
Make sure the system is securely related to an influence supply. Attempt utilizing a distinct outlet or energy adapter if mandatory.
2. Weak or No Wi-Fi Sign
Test the Wi-Fi sign power within the space the place the doorbell is put in. Transfer the system nearer to the router or think about using a Wi-Fi extender.
3. Incorrect Wiring
Confirm that the doorbell wires are correctly related to the right terminals on each the system and the chime equipment.
4. Defective Mount
Examine the doorbell mount for any harm or free connections. Reinstall the system securely utilizing the supplied screws.
5. Incorrect Battery Set up
Make sure the battery is inserted appropriately and absolutely charged. Consult with the person guide for particular directions.
6. Damaged or Broken Wires
Examine the wires for any cuts or breaks. If mandatory, exchange the broken wires or contact Ring help.
7. Intermittent Connection
Restart the system by urgent and holding the setup button for 15 seconds. This may reset the Wi-Fi connection.
8. Audio Points
Confirm that the speaker quantity is ready correctly within the Ring app. Test for any obstructions close to the microphone or speaker.
9. Troubleshooting Widespread Set up Points
| Problem | Resolution |
|---|---|
| Chime doesn’t ring | Confirm appropriate chime wiring or contact Ring help |
| Video footage is blurry or distorted | Modify digicam settings within the Ring app or take away any obstructions from the digicam’s view |
| Movement detection doesn’t work | Test movement sensitivity settings within the app or alter the system’s place |
| Stay view is delayed or freezing | Enhance Wi-Fi sign power or alter video high quality settings |
| Notifications are usually not being acquired | Guarantee push notifications are enabled within the app and verify your telephone’s notification settings |
| Doorbell is offline | Test energy provide, Wi-Fi connection, or contact Ring help |
Having fun with the Advantages of Your New Doorbell
Your new Ring Video Doorbell is put in and able to use. Now it is time to benefit from the many advantages it has to supply. Listed below are only a few of the issues you are able to do together with your new doorbell:
By no means miss a customer once more.
Together with your Ring Doorbell, you possibly can see and communicate to guests from anyplace with an web connection. Whether or not you are at house, at work, or on trip, you may at all times know who’s at your door.
Deter crime.
The Ring Doorbell’s movement detection and two-way discuss options can assist deter crime. Potential burglars might be much less prone to goal a house with a visual doorbell digicam, and so they’ll be even much less prone to stick round in the event you begin speaking to them by the doorbell.
Regulate your house.
The Ring Doorbell’s stay view function lets you verify in on your house from anyplace, anytime. You need to use the stay view to see what’s occurring in your yard, in your porch, and even inside your house.
Obtain alerts when movement is detected.
The Ring Doorbell will ship you an alert at any time when it detects movement. This fashion, you possibly can at all times concentrate on what is going on on round your house, even in the event you’re not there.
Report and save movies of holiday makers.
The Ring Doorbell can document and save movies of holiday makers. This fashion, you possibly can at all times have a document of who was at your door, even in the event you missed the alert.
Share movies with others.
You’ll be able to share movies of holiday makers with others by the Ring app. It is a nice option to maintain your loved ones and mates up to date on what is going on on at your house.
Entry your doorbell from a number of gadgets.
You’ll be able to entry your Ring Doorbell from a number of gadgets, together with your smartphone, pill, and pc. This fashion, you possibly can at all times keep related to your house, irrespective of the place you might be.
Customise your doorbell settings.
You’ll be able to customise your Ring Doorbell settings to suit your wants. You’ll be able to select the movement detection sensitivity, the alert settings, and the recording settings.
Get help from Ring.
Ring affords quite a lot of help choices, together with on-line assist, telephone help, and stay chat. In case you have any questions or issues together with your Ring Doorbell, you possibly can contact Ring for assist.
Methods to Set up a Ring Video Doorbell
Putting in a Ring Video Doorbell is a comparatively easy course of that may be accomplished in about quarter-hour. The next directions will information you thru the method step-by-step.
-
Select a mounting location
Step one is to decide on a mounting location in your Ring Video Doorbell. The perfect location is close to your entrance door, the place it should have a transparent view of anybody approaching. Make certain the placement is out of direct daylight and away from any sources of warmth or chilly.
-
Mark the mounting holes
After getting chosen a mounting location, use the supplied template to mark the mounting holes. Maintain the template in opposition to the wall and use a pencil to mark the 2 holes.
-
Drill the mounting holes
Utilizing a drill, drill two holes on the marked areas. The holes must be about 3/16 inches deep.
-
Insert the anchors
Insert the supplied anchors into the drilled holes.
-
Screw within the mounting bracket
Screw the supplied mounting bracket into the anchors.
-
Connect the Ring Video Doorbell
Slide the Ring Video Doorbell onto the mounting bracket and safe it with the supplied screws.
-
Stage the Ring Video Doorbell
Use a degree to ensure the Ring Video Doorbell is degree. Loosen the mounting screws if essential to degree the Ring Video Doorbell.
-
Tighten the mounting screws
Tighten the mounting screws to safe the Ring Video Doorbell.
-
Join the wires
In case you are connecting your Ring Video Doorbell to an present doorbell system, observe the directions within the Ring app to attach the wires.
-
Check the Ring Video Doorbell
As soon as the Ring Video Doorbell is put in, take a look at it to ensure it’s working correctly.
Folks Additionally Ask
How do I join my Ring Video Doorbell to Wi-Fi?
To attach your Ring Video Doorbell to Wi-Fi, observe these steps:
- Open the Ring app in your cellular system.
- Faucet the “Menu” icon within the top-left nook of the display screen.
- Faucet “Units.”
- Faucet the Ring Video Doorbell that you just wish to hook up with Wi-Fi.
- Faucet “Wi-Fi Settings.”
- Enter the password in your Wi-Fi community.
- Faucet “Join.”
How do I modify the batteries in my Ring Video Doorbell?
To alter the batteries in your Ring Video Doorbell, observe these steps:
- Take away the faceplate of the Ring Video Doorbell.
- Find the battery compartment.
- Take away previous batteries.
- Set up new batteries.
- Reattach the faceplate.
- Press and maintain the orange button on the again of the Ring Video Doorbell for five seconds.
- Launch the button.
- Look ahead to the Ring Video Doorbell to reboot.
How do I reset my Ring Video Doorbell?
To reset your Ring Video Doorbell, observe these steps:
