Putting in a wired Ring Doorbell is a comparatively easy course of that may be accomplished in only a few minutes. Nevertheless, it is essential to comply with the directions fastidiously to make sure that your doorbell is put in correctly and functioning appropriately. On this information, we’ll stroll you thru the step-by-step course of of putting in a wired Ring Doorbell with an current doorbell.
Earlier than you start, you may want to collect a number of instruments and supplies. You may want a screwdriver, a drill, a stage, and a pair of pliers. You may additionally want the Ring Doorbell, the mounting bracket, and the screws that got here with the doorbell. Moreover, you may must know the situation of your current doorbell wires.
Upon getting all your instruments and supplies gathered, you possibly can start the set up course of. First, you may must take away your current doorbell. To do that, merely unscrew the 2 screws which might be holding the doorbell in place. As soon as the screws are eliminated, you possibly can pull the doorbell straight off of the wall. Subsequent, you may must mount the Ring Doorbell mounting bracket. To do that, maintain the mounting bracket as much as the wall the place you need to set up the doorbell. Use a stage to ensure that the mounting bracket is stage, after which mark the situation of the screw holes. Upon getting marked the situation of the screw holes, drill two small holes into the wall. Then, insert the screws into the holes and tighten them till the mounting bracket is securely in place.
Selecting the Proper Location
Take into account visibility and protection: The doorbell ought to present a transparent view of the doorway and canopy the realm you need to monitor. Keep away from inserting it too excessive or low, as this may restrict the sector of view.
Take into account current wiring: It is perfect to decide on a location that already has current doorbell wiring. It will simplify the set up course of and decrease the necessity for added drilling or electrical work.
Take into account mounting floor: The doorbell needs to be mounted on a sturdy, flat floor that may help its weight. Keep away from mounting it on surfaces which might be vulnerable to vibrations or motion, as this may have an effect on the doorbell’s efficiency.
Extra issues for optimum placement:
| Issue | Suggestion |
|---|---|
| Peak | Between 48-54 inches (122-137 cm) from the bottom |
| Angle | Barely downward-facing for optimum area of view |
| Proximity to obstructions | Free from bushes, bushes, or different obstacles that would block the digital camera’s view |
| Energy supply | Inside simple attain of an current doorbell wire or energy outlet |
Gathering Instruments and Supplies
Mandatory Instruments
*
Screwdriver (Phillips head and flat head)
*
Drill (with a drill bit appropriate to your wall materials)
*
Wire strippers
*
Electrical tape
*
Degree
Required Supplies
*
Ring Wired Doorbell
*
Mounting bracket
*
Doorbell wiring equipment
*
Mounting screws
*
Wire nuts
Extra Supplies (Elective)
*
Drill bit for wooden or masonry, relying in your wall materials
*
Caulk or weatherstripping to seal the doorbell base
*
Chime equipment (if desired)
Putting in the Wiring Equipment
Earlier than you proceed with the set up, it is essential to substantiate that your current doorbell wiring meets Ring’s compatibility necessities. This is a desk that will help you confirm:
| Ring Doorbell Compatibility | Present Doorbell Wiring |
|---|---|
| Authentic Ring Doorbell | 8-24VAC, 10VA max, 50/60Hz |
| Ring Doorbell 2 and Ring Doorbell 3 | 8-24VAC, 40VA max, 50/60Hz |
| Ring Doorbell 3 Plus and Ring Doorbell 4 | 16-24VAC, 40VA max, 50/60Hz |
In case your doorbell wiring falls throughout the specified vary, you possibly can proceed with the set up. Listed here are the detailed steps for putting in the wiring equipment:
Step 1: Set up the Mounting Bracket
Establish the rear of the doorbell and find the 2 screw holes on the mounting bracket. Align the mounting bracket vertically and safe it to the wall utilizing the included screws.
Step 2: Join the Wires
Find the prevailing doorbell transformer and determine the terminals labeled “Entrance” and “Trans.” Twist collectively the ends of the doorbell wires that hook up with the transformer (“Entrance” wires). Twist collectively the ends of the opposite two doorbell wires that hook up with the doorbell button (“Trans” wires). Insert the twisted ends of the “Entrance” wires into the “Entrance” terminal on the doorbell and the twisted ends of the “Trans” wires into the “Trans” terminal.
Step 3: Safe the Wires
To make sure a safe connection, wrap {the electrical} tape across the terminals and wire ends. Don’t overtighten the tape, because it may harm the wires. Use a non-conductive materials, corresponding to a wire nut or a bit {of electrical} tape, to insulate any uncovered metallic on the wire ends.
Step 4: Join the Pigtail Wires
Find the pigtail wires connected to the doorbell. These wires are usually labeled with the letters “FR” and “TR.” Join the “FR” wire to the “Entrance” terminal on the doorbell and the “TR” wire to the “Trans” terminal.
Step 5: Safe the Doorbell
Elevate the doorbell onto the mounting bracket and align the 2 screw holes. Tighten the screws to safe the doorbell in place.
Step 6: Check the Doorbell
Press the doorbell button to make sure it’s functioning correctly. If the doorbell chime rings and the Ring app in your smartphone exhibits a dwell video feed, the set up was profitable.
Mounting the Doorbell Base
Observe these steps to mount your Ring Doorbell base:
- Flip off energy to the doorbell. Find your doorbell’s circuit breaker or fuse field and switch off the ability to that circuit.
- Take away the prevailing doorbell. Unscrew the screws that maintain the prevailing doorbell in place and disconnect the wires from the again of the doorbell.
- Mount the doorbell base. Use the offered screws to mount the doorbell base to the wall. Be sure the bottom is stage and safe.
- Join the wires. Join the wires from the doorbell to the terminals on the again of the doorbell base. The terminals are labeled “Entrance” and “Rear”.
- Activate energy to the doorbell. Return to your circuit breaker or fuse field and switch the ability again on to the doorbell circuit.
- Sync your Ring Doorbell. Obtain the Ring app and comply with the directions to sync your doorbell to your smartphone.
Connecting the Doorbell to the Wires
Step 1: Flip Off Energy on the Breaker
Earlier than beginning any electrical work, it is essential to make sure security by turning off the ability to the doorbell circuit on the breaker panel.
Step 2: Take away the Present Doorbell
Find the prevailing doorbell and take away it by unscrewing the mounting screws. Disconnect the wires from the terminals and label them for simple identification.
Step 3: Mount the Ring Doorbell Base
Maintain the Ring Doorbell base towards the wall the place you need to set up it and mark the screw holes. Use a screwdriver to put in the screws and safe the bottom to the wall.
Step 4: Join the Wires to the Ring Doorbell
Choice 1: Utilizing the Equipped Wire Nuts
- Strip about 1/2 inch of insulation from the ends of the doorbell wires.
- Twist the uncovered copper wires collectively from the Ring Doorbell base and the prevailing doorbell wires.
- Safe the connections utilizing the equipped wire nuts and tighten them securely.
Choice 2: Utilizing a Wire Terminal Block (Beneficial)
- Strip about 1/2 inch of insulation from the ends of the doorbell wires.
- Insert the stripped wires into the suitable terminals on the wire terminal block.
- Tighten the terminal screws firmly to safe the connections.
| Wire | Terminal |
|---|---|
| Entrance Doorbell | TB |
| Rear Doorbell (if relevant) | GND |
Step 5: Tuck the Wires and Safe the Ring Doorbell
- Collect all of the wires neatly inside {the electrical} field.
- Push the wires into the junction field and safe them with the offered wire clamp.
- Place the Ring Doorbell over the baseplate and align the mounting holes.
- Safe the Ring Doorbell to the baseplate by tightening the screws.
Step 6: Flip Energy Again On and Check the Doorbell
- Restore energy to the doorbell circuit on the breaker panel.
- Press the button on the Ring Doorbell to check it.
- If the doorbell rings and the Ring app exhibits a dwell view, you’ve efficiently put in the Ring Doorbell.
Attaching the Doorbell Faceplate
1. Select a Mounting Location: Choose a spot for the doorbell that provides a transparent view of the entryway. Mark the situation with a pencil.
2. Drill Information Holes: Use the offered drill bit to create two pilot holes on the marked location. The holes needs to be 1 inch aside and stage.
3. Screw within the Mounting Screws: Insert the 2 screws into the pilot holes and tighten them securely utilizing a screwdriver.
4. Connect Alignment Bracket: Take the alignment bracket and slide it over the mounting screws. Be sure the bracket is centered and leveled.
5. Lock the Bracket: Use the offered safety screw to lock the alignment bracket in place on the mounting screws.
6. Wire the Doorbell: This step varies relying in your current wiring. Seek the advice of the desk under for detailed directions:
| Present Wiring | Directions |
|---|---|
| Transformer with doorbell wires | Join the crimson wire from the doorbell to the “Entrance” terminal on the doorbell. Join the white wire to the “Again” terminal. |
| Transformer with no doorbell wires | Join the crimson wire to the “Entrance” terminal and the white wire to the “Again” terminal. Then, join the black wire to the “Transformer” terminal. |
| Transformerless with doorbell wires | Join the crimson wire to the “Entrance” terminal and the white wire to the “Again” terminal on the doorbell. |
| Transformerless with no doorbell wires | Not suitable with Ring Wired Doorbell. |
7. Safe the Faceplate: Slide the doorbell faceplate over the alignment bracket and press down firmly to snap it into place.
Chiming the Indoor Bell Chime
To chime the indoor bell chime, comply with these steps:
- Press the “Settings” button on the Ring app.
- Choose “Common Settings.”
- Scroll right down to “Doorbell Chime Tones.”
- Choose the chime tone you need to use.
- Press the “Save” button.
- The chosen chime tone will now play when the doorbell button is pressed.
You can too modify the amount of the indoor bell chime by following these steps:
- Press the “Settings” button on the Ring app.
- Choose “Common Settings.”
- Scroll right down to “Doorbell Chime Quantity.”
- Modify the amount slider to the specified stage.
- Press the “Save” button.
- The amount of the indoor bell chime will now be adjusted to the chosen stage.
In case you have a multiple-chime system, you possibly can select which chimes to activate. To do that, comply with these steps:
- Press the “Settings” button on the Ring app.
- Choose “Common Settings.”
- Scroll right down to “Chime Connection.”
- Choose the chimes you need to activate.
- Press the “Save” button.
Verifying the Connection
1. Energy Biking the Ring Doorbell
Maintain down the orange reset button positioned on the again of the doorbell for 15 seconds. The doorbell will flip off after which again on, indicating a profitable energy cycle.
2. Checking the Transformer
Make sure that the transformer offering energy to the doorbell is suitable with Ring’s energy necessities. Examine the specs of your transformer or check with Ring’s web site for suitable choices.
3. Ringing the Doorbell
Press the doorbell button to check its performance. If the doorbell chimes and prompts, it signifies a profitable connection between the doorbell and transformer.
4. Checking the Wi-Fi Connection
Be sure that your Wi-Fi community is powerful and secure. Attempt connecting one other gadget to the Wi-Fi community to confirm its connectivity.
5. Making certain a Robust Sign
Place the Ring Doorbell nearer to the Wi-Fi router or use a Wi-Fi extender to spice up the sign power. The nearer the doorbell is to the router, the higher the sign it’s going to obtain.
6. Checking for Obstructions
Take away any obstructions, corresponding to metallic objects or thick partitions, that would intervene with the Wi-Fi sign between the doorbell and router.
7. Utilizing the Ring App
Open the Ring app in your smartphone and comply with the directions to attach your doorbell to the app. The app will troubleshoot any connectivity points and supply steering.
8. Superior Troubleshooting Choices
If the above steps don’t resolve the difficulty, take into account the next superior troubleshooting choices:
| Troubleshooting Step | Description |
|---|---|
| Resetting the Doorbell and Transformer | Disconnect each the doorbell and transformer for a couple of minutes, then reconnect them to begin recent. |
| Utilizing a Completely different Wi-Fi Community | Join the doorbell to a distinct Wi-Fi community to rule out points with the unique community. |
| Inspecting the Wiring | Totally examine the wiring between the doorbell, transformer, and chime field for any harm or unfastened connections. |
| Contacting Ring Assist | If all different troubleshooting steps fail, contact Ring’s help staff for additional help. |
Configuring the Ring Doorbell App
As soon as your Ring Doorbell is put in, you may must configure the Ring Doorbell app to finish the setup course of. This is a step-by-step information:
1. Obtain and open the Ring Doorbell app
Obtain the Ring Doorbell app from the App Retailer or Google Play Retailer and open it in your smartphone or pill.
2. Create an account or log in
In case you do not have already got a Ring account, create one by following the on-screen directions. In case you have an current account, log in utilizing your electronic mail tackle and password.
3. Add a tool
Faucet the “Add Gadget” button on the house display of the app and choose “Doorbells” from the record of choices.
4. Scan the QR code
Use the digital camera in your smartphone or pill to scan the QR code on the again of your Ring Doorbell.
5. Enter your Wi-Fi password
Enter the password to your Wi-Fi community and faucet “Join.”
6. Select a reputation and placement
Give your Ring Doorbell a reputation and choose a location for it within the app.
7. Modify movement detection settings
Customise the movement detection settings to find out when the Ring Doorbell will start recording video. You possibly can modify the movement sensitivity, detection zones, and movement schedule.
8. Arrange notifications
Select which notifications you wish to obtain when the Ring Doorbell detects movement or when somebody presses the doorbell button.
9. Superior settings
Discover the superior settings to configure extra options, corresponding to:
| Setting | Description |
|---|---|
| Two-step verification | Provides an additional layer of safety to your Ring account. |
| Linked accounts | Join your Ring Doorbell to different good dwelling units or providers. |
| Subscription plans | Entry extra options and prolonged warranties by subscribing to a Ring Shield plan. |
10. Save and exit
Upon getting configured the settings, faucet “Save” and exit the app. Your Ring Doorbell is now totally arrange and able to use.
Troubleshooting Widespread Points
The doorbell isn’t powering on
Examine the next:
- Make sure the wire connections are safe and the terminals are tightened.
- The transformer is offering the right voltage (16-24 VAC).
- Check the transformer with a multimeter to confirm it is working appropriately.
- The doorbell isn’t shorting out towards any metallic surfaces.
The doorbell isn’t connecting to Wi-Fi
Guarantee the next:
- Your Wi-Fi community is functioning correctly.
- The doorbell is inside vary of your Wi-Fi sign.
- The Wi-Fi password entered throughout setup is appropriate.
- The doorbell’s firmware is updated.
- Attempt restarting the doorbell by urgent the reset button for 10 seconds.
The video feed is poor high quality
Study the next:
- Be sure the doorbell’s lens is clear and unobstructed.
- Modify the video settings within the Ring app to optimize high quality.
- Examine the web connection to the doorbell is secure.
- Take into account putting in a Wi-Fi extender to reinforce sign power.
- Examine if the doorbell is overheating, as this may have an effect on video high quality.
Doorbell chimes don’t work
Confirm the next:
- The doorbell chime is suitable with the Ring doorbell.
- The chime is related appropriately to the doorbell and energy supply.
- The chime’s quantity is turned up.
- The chime’s batteries are recent or the transformer is offering satisfactory energy.
- Examine if the doorbell’s chime settings are configured appropriately within the Ring app.
Movement detection not working correctly
Take into account the next:
- Modify the movement sensitivity settings within the Ring app.
- Be sure the doorbell’s area of view is obvious and unobstructed.
- Examine if there are any objects or animals which may be triggering false movement alerts.
- Replace the doorbell’s firmware to make sure it is operating the most recent software program.
- Disable some other motion-activated units which may be interfering with the doorbell.
How To Set up Wired Ring Doorbell
Putting in a wired Ring Doorbell is a comparatively easy course of that may be accomplished in a number of hours. Nevertheless, it is very important notice that this course of requires some fundamental electrical data and expertise. In case you are not snug working with electrical energy, it’s best to rent a professional electrician to put in your Ring Doorbell for you.
To put in a wired Ring Doorbell, you will have the next instruments and supplies:
- A screwdriver
- A drill
- A wire cutter
- A wire stripper
- Electrical tape
- A stage
- A mounting bracket
- Your Ring Doorbell
Upon getting gathered your instruments and supplies, you possibly can start the set up course of. Step one is to decide on a location to your Ring Doorbell. The very best location is usually close to your entrance door, the place it’s going to have a transparent view of the realm you need to monitor. Upon getting chosen a location, use a stage to make sure that the mounting bracket is stage. Mark the situation of the mounting bracket on the wall, after which drill pilot holes for the screws.
Subsequent, join the wires out of your Ring Doorbell to the terminals on the mounting bracket. The crimson wire needs to be related to the terminal marked “R”, the black wire needs to be related to the terminal marked “C”, and the yellow wire needs to be related to the terminal marked “V”. As soon as the wires are related, safe the Ring Doorbell to the mounting bracket utilizing the screws offered.
Lastly, obtain the Ring app in your smartphone and comply with the directions to arrange your Ring Doorbell. As soon as your Ring Doorbell is ready up, you can begin utilizing it to observe your property and obtain alerts when somebody rings your doorbell.
Individuals Additionally Ask
How do I reset my Ring Doorbell?
To reset your Ring Doorbell, press and maintain the setup button for 10 seconds. The Ring Doorbell will then flash white and restart.
How do I modify the batteries in my Ring Doorbell?
To alter the batteries in your Ring Doorbell, take away the faceplate and find the battery compartment. Take away the outdated batteries and insert the brand new batteries. Exchange the faceplate and your Ring Doorbell might be prepared to make use of.
How do I troubleshoot my Ring Doorbell?
In case you are having bother together with your Ring Doorbell, there are some things you possibly can strive. First, examine to ensure that your Ring Doorbell is related to Wi-Fi. Subsequent, strive resetting your Ring Doorbell. Lastly, you possibly can contact Ring help for assist.
