Embark on a exceptional journey to reinforce the visible prowess of your Atomos Shinobi. By integrating customized Look Up Tables (LUTs), you’ll be able to unlock a world of transformative shade grading potentialities, turning your footage right into a cinematic masterpiece. On this complete information, we are going to meticulously information you thru the method of putting in LUTs in your Shinobi, empowering you to raise your visible storytelling to new heights.
To start the set up, set up a connection between your Shinobi and a pc. Make the most of the supplied USB cable to bridge the hole between these two units. As soon as a seamless connection is established, navigate to the interior storage drive of your Shinobi. Throughout the drive, find and open the “LUTS” folder, which serves because the designated repository for customized LUTs.
The method of including LUTs is remarkably simple. Merely switch the specified LUT recordsdata, usually bearing the “.dice” extension, into the “LUTS” folder. Upon profitable switch, the Shinobi will routinely detect and index the brand new LUTs, making them available on your artistic endeavors. With the LUTs at your disposal, now you can effortlessly apply them to your footage, unleashing a spectrum of vibrant colours, enhanced distinction, and tailor-made aesthetics. Embrace the transformative energy of LUTs and elevate your cinematic creations to unprecedented heights.
Importing LUTs by way of USB Drive
Enhancing your Atomos Shinobi with customized LUTs by way of a USB drive is a breeze. To embark on this course of, observe these meticulously detailed steps:
1. Collect Your Supplies:
Earlier than delving into the set up course of, guarantee you might have the next objects at your disposal:
– Atomos Shinobi
– USB drive formatted in FAT32 or exFAT
– LUT recordsdata in .dice format
2. Put together the USB Drive:
Start by creating a brand new folder in your USB drive and naming it “LUTs.” Switch your required LUT recordsdata into this devoted folder. Be sure that the LUT recordsdata are within the .dice format for compatibility with the Atomos Shinobi.
3. Join and Import LUTs:
Join the USB drive to your Shinobi utilizing the supplied USB-C cable. Navigate to the Enter/Output menu on the Shinobi’s show and choose the USB drive because the enter supply. Throughout the USB drive menu, find and open the “LUTs” folder containing your LUT recordsdata. Choose the specified LUT file and press the “Import” button. The Shinobi will import the LUT and retailer it in its inside reminiscence for future use.
Putting in LUTs from an SD Card
To put in LUTs from an SD card, observe these steps:
1. Put together your SD card
Format an SD card as FAT32. Create a folder on the SD card named “LUTS”.
2. Copy the LUT recordsdata to the SD card
Copy the LUT recordsdata (.dice or .3dl recordsdata) to the “LUTS” folder on the SD card.
3. Insert the SD card into the Shinobi
Insert the SD card into the Shinobi’s SD card slot. The Shinobi will routinely detect the LUT recordsdata on the SD card.
3.1. Importing LUTs from the SD card
To import LUTs from the SD card:
- Navigate to the “Settings” menu on the Shinobi.
- Choose the “LUT” tab.
- Choose the “Import LUTs” possibility.
- Choose the “SD Card” possibility.
- Choose the LUTs you need to import.
- Click on the “Import” button.
3.2. Making use of LUTs to footage
To use LUTs to footage:
- Within the “Settings” menu, choose the “LUT” tab.
- Choose the LUT you need to apply.
- Click on the “Apply” button.
Copying LUTs by way of File Switch Protocol (FTP)
Transferring LUTs to your Atomos Shinobi via FTP permits you to use a wide range of customized shade profiles. Here is a step-by-step information:
- Allow FTP in your Atomos Shinobi by going to the “Community” menu and deciding on “Allow FTP Server”.
- Join your Shinobi to a Wi-Fi community or use an Ethernet cable.
- Get hold of the Shinobi’s IP handle from the show.
- Utilizing an FTP shopper similar to FileZilla, enter the Shinobi’s IP handle into the “Host” subject and connect with the system:
FTP Settings Shinobi Host [Shinobi’s IP Address] Username admin Password atomos123 Port 21 - Within the FTP shopper, navigate to the “LUTs” folder in your Shinobi (normally positioned at /mnt/knowledge/LUTs).
- Drag and drop the specified LUT recordsdata out of your laptop to the “LUTs” folder on the Shinobi.
- The Shinobi will routinely import the LUT recordsdata and make them obtainable to be used in your initiatives.
Loading LUTs by way of the Atomos Cloud
The Atomos Cloud offers a handy method to load LUTs onto your Shinobi monitor. Comply with these steps to get began:
- Create an Atomos Cloud account and log in.
- Choose “LUTs” from the menu.
- Click on “Add LUT” and choose the LUT file you need to add.
- As soon as the LUT is uploaded, it is going to be obtainable within the “My LUTs” part.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Cloud LUTs,” choose the LUT you need to load.
Importing Customized LUTs
Along with the LUTs supplied by Atomos, you may as well add your individual customized LUTs to the Atomos Cloud. Here is how:
- Create a brand new LUT file in a appropriate format (e.g., .dice, .3dl).
- Log into your Atomos Cloud account and choose “LUTs” from the menu.
- Click on “Add LUT” and choose the choice to add a customized LUT.
- Navigate to the situation of your LUT file and choose it.
- As soon as the LUT is uploaded, it is going to be obtainable within the “My LUTs” part.
Customized LUTs (.dice & .3dl codecs)
The Atomos Shinobi helps customized LUTs within the .dice and .3dl codecs. These LUTs could be created utilizing third-party software program or downloaded from on-line assets. To load a customized LUT, observe these steps:
- Create a LUT file in both the .dice or .3dl format.
- Copy the LUT file to the “LUTs” folder in your Shinobi’s microSD card.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Customized LUTs,” choose the LUT you need to load.
LUTs Desk
| LUT Format | Bit Depth | Shade House |
|---|---|---|
| .dice | 10-bit or 12-bit | Log or linear |
| .3dl | 10-bit or 12-bit | Log or linear |
Observe: The Shinobi helps 3D LUTs with a measurement of 17x17x17 or 33x33x33.
Utilizing the LUT Picker Menu
To entry the LUT Picker menu, press the ‘MENU’ button on the Shinobi. Then, navigate to the ‘Instruments’ tab and choose ‘LUT Picker’.
The LUT Picker menu will show an inventory of accessible LUTs. To load a LUT, merely spotlight it and press the ‘ENTER’ button.
As soon as a LUT has been loaded, it is going to be utilized to all incoming footage. You possibly can preview the results of the LUT by urgent the ‘PLAY’ button.
Loading Customized LUTs
You may also load customized LUTs onto the Shinobi. To do that, you have to to create a LUT file in a appropriate format, similar to .dice or .3dl.
After getting created a LUT file, you’ll be able to switch it to the Shinobi utilizing a USB drive. To do that, join the USB drive to the Shinobi and navigate to the ‘IMPORT’ folder. Then, copy the LUT file to the ‘LUTS’ folder.
As soon as the LUT file has been copied, you’ll be able to entry it from the LUT Picker menu. Merely navigate to the ‘Customized’ tab and choose the LUT file.
LUT Picker Menu Settings
The LUT Picker menu provides a wide range of settings that will let you customise the way in which LUTs are utilized. These settings embody:
| Setting | Description |
|---|---|
| LUT Mode | Determines how the LUT is utilized to the footage. Choices embody ‘Full’, ‘Half’, and ‘Off’. |
| LUT Energy | Adjusts the depth of the LUT. |
| LUT Preview | Allows or disables the LUT preview. |
Customizing LUT Collections
The Atomos Shinobi permits you to customise your LUT collections to fit your preferences and workflow. Comply with these steps to import customized LUTs and create your individual collections:
1. Obtain LUT Recordsdata
Purchase LUT recordsdata from trusted sources or create your individual utilizing shade grading software program.
2. Copy LUT Recordsdata
Copy the LUT recordsdata to a USB drive.
3. Format USB Drive
Format the USB drive as FAT32 to make sure compatibility with the Shinobi.
4. Insert USB Drive
Insert the USB drive into the Shinobi’s USB port.
5. Entry LUT Menu
On the Shinobi’s primary menu, navigate to “Settings” > “LUTs” > “Import LUTs.”
6. Choose LUT Recordsdata
Choose the LUT recordsdata you need to import by checking the bins subsequent to them.
7. Import LUTs
Click on the “Import” button to repeat the LUTs to the Shinobi.
8. Create Customized Collections
To create a customized LUT assortment, navigate to the “Settings” > “LUTs” menu and choose “Handle Collections.”
| Choice | Description |
|---|---|
| Create Assortment | Identify and create a brand new LUT assortment. |
| Add LUT to Assortment | Choose an current LUT and add it to the present assortment. |
| Rename Assortment | Change the title of the present assortment. |
| Delete Assortment | Take away the present assortment and all its related LUTs. |
After getting created a customized assortment, you’ll be able to choose it from the “LUTs” menu to use its LUTs to your footage.
Find out how to Set up LUTs on Atomos Shinobi
LUTs (Look Up Tables) are a robust software for shade grading footage. They can be utilized to create a wide range of appears to be like, from refined changes to dramatic shade modifications. In the event you’re utilizing an Atomos Shinobi monitor, you’ll be able to set up LUTs to preview your footage with totally different shade grades.
To put in LUTs in your Atomos Shinobi, you have to:
- A USB flash drive formatted to FAT32
- LUT recordsdata in .dice format
After getting your LUT recordsdata, observe these steps:
- Copy your LUT recordsdata to the basis listing of your USB flash drive.
- Insert the USB flash drive into the USB port in your Atomos Shinobi.
- Go to the "Settings" menu in your Atomos Shinobi.
- Choose "LUTs".
- Choose "Load LUT".
- Navigate to the USB flash drive and choose the LUT file you need to set up.
- Choose "Load".
The LUT will now be put in in your Atomos Shinobi. You possibly can preview your footage with the LUT utilized by deciding on the LUT within the “LUTs” menu.
Folks Additionally Ask
How do I create my very own LUTs?
There are a selection of software program packages that you should utilize to create your individual LUTs. Some in style choices embody DaVinci Resolve, LUTCalc, and Shade Finale. After getting created your LUTs, you’ll be able to export them in .dice format and set up them in your Atomos Shinobi.
Can I exploit LUTs from different sources?
Sure, you should utilize LUTs from different sources, similar to web sites or boards. Nonetheless, it is very important ensure that the LUTs are appropriate along with your Atomos Shinobi. The LUTs have to be in .dice format and so they have to be designed to be used with Log footage.
How do I delete LUTs from my Atomos Shinobi?
To delete LUTs out of your Atomos Shinobi, go to the “Settings” menu and choose “LUTs”. Then, choose the LUT you need to delete and press the “Delete” button.
