Loading movie into the Mamiya 645 Movie Holder is a vital step in capturing beautiful photos with this medium format digicam. By understanding the right approach and following the steps exactly, you may make sure that your movie is loaded accurately, lowering the danger of errors and wasted pictures.
Earlier than you start, collect the required supplies: the Mamiya 645 Movie Holder, a roll of 120 movie, a altering bag (if desired), and a movie winder. It is also important to work in a clear and dust-free setting to attenuate the danger of contaminating the movie.
When you’re ready, observe these steps rigorously:
1. Open the movie holder by urgent the 2 latches on the again and lifting the highest cowl.
2. Unroll a brief size of movie from the roll and insert the vanguard into the slot on the right-hand aspect of the movie holder.
3. Wind the movie onto the take-up spool till the sprocket holes on the movie have interaction with the sprocket tooth on the spool.
4. Shut the movie holder by urgent down on the highest cowl till it clicks into place.
5. Advance the movie by turning the movie advance lever clockwise till you’re feeling resistance.
6. Repeat step 5 till the movie counter reaches “1.”
7. Your movie is now loaded and able to use.
Getting ready the Movie Holder
Loading movie holders could be a daunting job, particularly for freshmen. Nevertheless, with the suitable directions and a bit observe, it will possibly develop into a fast and straightforward course of. On this article, we’ll present a step-by-step information on easy methods to load movie holders for a Mamiya 645 digicam. We will even present some ideas and tips that will help you keep away from widespread issues.
Earlier than you start, you will want to assemble the next supplies:
- A Mamiya 645 digicam
- A movie holder
- 120 roll movie
- A movie cutter
- A pair of tweezers (optionally available)
After getting gathered your supplies, you may start the loading course of.
Step 1: Open the Movie Holder
To open the movie holder, find the small latch on the again of the holder. Press the latch and elevate the again of the holder up. It is best to now see the movie chamber contained in the holder.
Subsequent, find the 2 small knobs on the aspect of the movie chamber. Flip the knobs to the suitable to loosen them. It will can help you take away the darkish slide from the movie chamber.
Step 2: Load the Movie
Now that the movie chamber is open, you may load the movie. Begin by taking the 120 roll movie and chopping off a brief piece of the chief. The chief is the black paper that’s hooked up to the start of the movie.
After getting lower the chief, insert the movie into the movie chamber. The movie must be inserted with the emulsion aspect going through down. The emulsion aspect is the shiny aspect of the movie.
Step 3: Advance the Movie
As soon as the movie is inserted, it’s worthwhile to advance it to the primary body. To do that, flip the knob on the aspect of the movie chamber to the suitable. You’ll really feel the movie being superior as you flip the knob.
Proceed turning the knob till you see the quantity “1” within the body counter window. This means that the movie is now prepared for use.
Step 4: Shut the Movie Holder
As soon as the movie is superior, you may shut the movie holder. To do that, merely elevate the again of the holder and press it down till it clicks into place.
Lastly, flip the 2 small knobs on the aspect of the movie chamber to the left to tighten them. It will safe the darkish slide in place.
Your movie holder is now loaded and prepared for use.
Inserting the Movie into the Cassette
Desk of Contents
| Step | Description |
|---|---|
| 1 | Open the cassette by urgent the discharge button and lifting the lid. |
| 2 | Insert the movie into the cassette. Make sure the movie is aligned accurately with the arrows and sprockets. |
| 3 | Shut the cassette by aligning the lid and urgent it down till it clicks into place. |
Detailed Directions for Step 2: Inserting the Movie into the Cassette
1. Take the roll of movie and find the tip with the chief protruding.
2. Align the chief with the arrows and sprockets contained in the cassette. The arrows ought to level in direction of the movie take-up spool.
3. Rigorously insert the movie into the cassette, guaranteeing it’s taut and mendacity flat in opposition to the bottom.
4. Proceed inserting the movie till you attain the tip of the cassette.
5. Verify that the movie is securely seated within the cassette by gently pulling on the chief. If the movie strikes freely, it isn’t correctly inserted.
Aligning the Movie Sprocket
To make sure correct alignment of the movie sprocket, observe these steps:
- Determine the sprocket holes on the movie. These are positioned alongside the sides of the movie.
- Open the movie holder. Pull the discharge lever on the again of the holder and elevate the highest cowl.
- Place the movie over the sprockets. Align the sprocket holes on the movie with the sprockets on the movie holder. There must be one sprocket on all sides of the movie.
- Insert the movie holder into the digicam. Line up the index marks on the movie holder and digicam physique and insert the holder.
- Shut the movie holder. Push the highest cowl down till it clicks into place.
- Advance the movie. Rotate the movie advance lever to maneuver the movie into the digicam.
- Verify the alignment. Look by the digicam’s viewfinder to make sure that the movie is correctly aligned. The sprocket holes must be seen within the viewfinder.
Extra Ideas for Aligning the Movie Sprocket
- Use a lightbox to light up the movie and make it simpler to see.
- Watch out to not contact the movie floor.
- If the movie will not be correctly aligned, it could trigger issues with publicity or focus.
- You’ll be able to alter the alignment of the movie by rotating the movie advance lever barely.
| Gap Sort | Description |
|---|---|
| Spherical holes | Common 35mm sprockets |
| Lengthy, rectangular holes | Nikon/Pentax or most 120/220 movies |
| Quick, rectangular holes | Mamiya 6/7, 120/220 movies |
Closing the Cassette
As soon as the movie is loaded into the movie holder, it is time to shut the cassette. This can be a easy course of however requires care to make sure the movie will not be broken.
First, find the 2 launch buttons on the highest of the cassette. Press and maintain each buttons whereas sliding the highest of the cassette in direction of you.
Subsequent, elevate the highest of the cassette away from the underside. Watch out to not contact the movie whereas doing this.
As soon as the highest of the cassette is eliminated, you will notice the movie spool. Gently pull the movie out of the spool and place it within the take-up spool on the opposite aspect of the cassette.
Subsequent, wind the movie onto the take-up spool by turning the knob on the highest of the cassette.
Lastly, shut the highest of the cassette by sliding it again into place till it clicks. Be certain that the discharge buttons usually are not pressed when doing this.
The movie is now securely loaded into the cassette and prepared for use in your digicam.
Here’s a desk summarizing the steps for closing the cassette:
| Step | Description |
|---|---|
| 1 | Find the 2 launch buttons on the highest of the cassette. |
| 2 | Press and maintain each buttons whereas sliding the highest of the cassette in direction of you. |
| 3 | Carry the highest of the cassette away from the underside. |
| 4 | Gently pull the movie out of the spool and place it within the take-up spool on the opposite aspect of the cassette. Wind the movie onto the take-up spool by turning the knob on the highest of the cassette. |
| 5 | Shut the highest of the cassette by sliding it again into place till it clicks. |
Attaching the Cassette to the Movie Holder
To load the movie holder with the movie cassette, observe these steps:
- Open the movie holder: Press the discharge button on the aspect of the movie holder and elevate the again cowl.
- Insert the cassette: Place the movie cassette into the movie holder. Be sure that the arrow on the cassette is aligned with the arrow on the movie holder.
- Shut the movie holder: Decrease the again cowl onto the cassette and press it down till it locks into place.
- Wind the movie: Rotate the movie advance knob clockwise till the movie is absolutely wound onto the take-up spool.
- Set the movie counter: Pull the movie counter lever upwards and set the counter to “0.”
5. Verifying Movie Loading
To make sure that the movie is loaded accurately, carry out the next checks:
| Verify | Description |
|---|---|
| Movie counter place | The counter must be at “0” with the primary body uncovered. |
| Sprocket holes | The movie must be engaged correctly with the sprocket holes alongside the sting. |
| Movie stress | The movie must be taut and never unfastened. |
| Mild leaks | Verify for any seen gentle leaks across the movie holder or cassette. |
If any of those checks fail, the movie is probably not loaded accurately. Reopen the movie holder and test the loading course of once more.
Verifying the Movie Advance
As soon as the movie is loaded, you will want to confirm that the movie is advancing correctly. To do that, observe these steps:
- Wind the movie advance lever till the movie counter reaches 1.
- Look by the movie advance window (positioned on the again of the digicam) to make sure that the movie is shifting easily and securely by the digicam.
- If the movie will not be advancing correctly, test the next:
- The movie is probably not loaded accurately. Take away the movie and reload it following the steps outlined above.
- The movie advance lever is probably not functioning correctly. Contact a certified digicam technician for restore.
- The digicam could also be experiencing a jam. Take away the movie and take a look at once more. If the jam persists, contact a certified digicam technician for restore.
- After getting verified that the movie is advancing correctly, you may start taking photos.
- After every publicity, wind the movie advance lever till the movie counter advances to the subsequent quantity.
- Proceed winding the movie advance lever till your complete roll of movie has been uncovered.
Setting the Movie Sort and Velocity (Non-obligatory)
Whereas not strictly obligatory, setting the proper movie sort and pace can enhance the accuracy of the digicam’s publicity metering. To do that, observe these steps:
1. Open the digicam again by urgent the discharge button on the highest proper and lifting the again upwards.
2. Find the movie pace dial on the left aspect of the digicam physique, simply above the lens mount. Flip the dial to match the ISO pace of the movie you might be utilizing.
3. Find the movie sort selector swap on the again of the digicam, slightly below the viewfinder. Slide the swap to match the kind of movie you might be utilizing (e.g., colour adverse, colour slide, or black and white).
4. Shut the digicam again by aligning the pink dot on the again of the digicam with the pink dot on the digicam physique. Press down on the again to lock it in place.
Marking the First Body
As soon as the movie has been loaded into the holder and the darkish slide eliminated, it is essential to mark the primary body to make sure correct alignment throughout taking pictures. That is particularly necessary when utilizing a leaf shutter digicam just like the Mamiya 645, the place the shutter is positioned near the movie airplane.
Checking the Movie Counter
Earlier than marking the primary body, test the movie counter on the digicam again. It will usually show a quantity indicating the body at the moment being loaded. Observe this quantity down because it serves as the place to begin for marking the primary body.
Positioning the Movie Holder
Insert the movie holder into the digicam again as ordinary, aligning it with the reference marks. Gently press it into place till it clicks and locks securely.
Advancing the Movie
Advance the movie to the marked quantity on the counter. This may be executed by urgent the movie advance lever or utilizing the movie crank.
Marking the Body
Utilizing a fine-tip marker or pencil, rigorously mark the nook of the movie body that shall be uncovered first. This mark must be seen by the viewfinder when the shutter is open.
Inserting the Darkish Slide
As soon as the primary body has been marked, insert the darkish slide again into the movie holder to guard the movie from publicity till the second of images.
Extra Ideas
For optimum alignment, make sure that the marked body is completely aligned with the middle of the viewfinder. Moreover, it is a good observe to cowl the viewfinder with the lens cap to stop gentle from fogging the movie throughout marking.
Winding the Movie to the Begin
1. Open the digicam’s again by urgent the discharge button and lifting it upwards.
2. Insert the movie holder into the digicam, guaranteeing that it’s correctly aligned.
3. Shut the digicam’s again to safe the movie holder in place.
4. Advance the movie by urgent the shutter launch button till the movie counter reads “1.”
5. Flip the rewind knob clockwise till the movie is taut.
6. Press the shutter launch button once more to be sure that there’s movie within the digicam.
7. Shut the lens to “C.”
8. Advance the movie by urgent the shutter launch button till the movie counter reads “2.”
9. If you’re utilizing a 120 movie roll, you will want to advance the movie manually. To do that, pull out the movie chief from the movie holder and insert it into the take-up spool. Flip the take-up spool clockwise till the movie is taut. Advance the movie by urgent the shutter launch button till the movie counter reads “2.”
| Movie Sort | Development |
|---|---|
| 120 | Handbook |
| 220 | Automated |
10. Shut the lens to “A.”
11. Your digicam is now prepared to make use of.
Loading the Movie Holder into the Digicam
To load movie into the Mamiya 645, you will want to first open the again of the digicam by urgent the button on the right-hand aspect of the physique. As soon as the again is open, you will want to take away the movie holder from its compartment.
Loading the Movie
To load the movie, you will want to first feed it into the movie holder by inserting it into the slot on the prime of the holder. As soon as the movie is inserted, you will want to drag it down till it reaches the underside of the holder. Subsequent, you will want to show the winding knob on the right-hand aspect of the holder till the movie is absolutely wound.
Inserting the Movie Holder into the Digicam
As soon as the movie is loaded, you will want to insert the movie holder into the digicam by aligning the arrow on the holder with the corresponding mark on the digicam physique. As soon as the holder is inserted, you will want to press down on the highest of the holder till it clicks into place.
To make sure that the movie is correctly loaded, you will want to test the movie counter on the again of the digicam. The counter ought to learn “1” after the movie has been loaded.
Desk of Contents
| Step | Description |
|—|—|
| 1 | Open the again of the digicam. |
| 2 | Take away the movie holder from its compartment. |
| 3 | Insert the movie into the movie holder. |
| 4 | Pull the movie down till it reaches the underside of the holder. |
| 5 | Flip the winding knob on the right-hand aspect of the holder till the movie is absolutely wound. |
| 6 | Insert the movie holder into the digicam by aligning the arrow on the holder with the corresponding mark on the digicam physique. |
| 7 | Press down on the highest of the holder till it clicks into place. |
| 8 | Verify the movie counter on the again of the digicam to make sure that the movie is correctly loaded. |
| 9 | Shut the again of the digicam. |
| 10 | Advance the movie to the primary body by turning the movie advance lever on the highest of the digicam. |
The best way to Load a Movie Holder for a Mamiya 645
Loading a movie holder for a Mamiya 645 digicam is a straightforward course of that may be accomplished in a couple of minutes. By following these steps, you may make sure that your movie is correctly loaded and able to use:
- Open the movie holder by urgent the discharge button and flattening on the highest of the holder.
- Insert the movie into the holder, with the emulsion aspect going through up. The movie must be aligned with the arrows on the holder.
- Shut the movie holder by pushing up on the highest of the holder till it clicks into place.
- Load the movie holder into the digicam by sliding it into the movie chamber till it clicks into place.
Individuals Additionally Ask
How do I take away a movie holder from a Mamiya 645 digicam?
To take away a movie holder from a Mamiya 645 digicam, press the discharge button and pull down on the highest of the holder.
What number of frames does a Mamiya 645 movie holder maintain?
A Mamiya 645 movie holder holds 12 frames.
What sort of movie can I exploit in a Mamiya 645 digicam?
You should use 120 or 220 movie in a Mamiya 645 digicam.
