The Logitech G923 is a well-liked racing wheel for sim racing fans. It gives a sensible driving expertise, due to its pressure suggestions motors and leather-wrapped steering wheel. One of the crucial necessary issues to arrange accurately on a racing wheel is the button mapping. This can decide which buttons management which capabilities within the recreation.
In Assetto Corsa, there are two primary forms of button mappings: ahead and reverse. Ahead mappings are used for controlling the automotive in a ahead course, whereas reverse mappings are used for controlling the automotive in a reverse course. The default button mapping for the G923 in Assetto Corsa just isn’t superb for everybody. Some individuals might choose to make use of totally different buttons for ahead and reverse, or they could need to change the order of the buttons. Happily, it’s simple to alter the button mapping on the G923.
To vary the button mapping on the G923, open the Logitech G HUB software program. Click on on the “Buttons” tab, after which choose the “Ahead” or “Reverse” possibility. From right here, you possibly can drag and drop the buttons to alter their order. You too can click on on the “Assign” button to assign a particular operate to a button. As soon as you might be pleased with the button mapping, click on on the “OK” button to save lots of your modifications.
Connecting the Logitech G923 Wheel to ATS
Step 1: Set up the G923 Drivers
Earlier than connecting your G923 wheel to ATS, you could set up the newest drivers from Logitech’s web site. These drivers will allow your laptop to acknowledge and talk along with your wheel, making certain that every one its options operate accurately inside ATS.
Listed here are detailed directions on how you can set up the G923 drivers:
- Go to Logitech’s assist web site and find the G923 assist web page.
- Choose the “Downloads” tab and obtain the newest driver bundle on your working system.
- Run the downloaded setup file and observe the on-screen directions to finish the set up.
- As soon as the set up is full, restart your laptop to make sure the modifications take impact.
Accessing the In-Recreation Controls Menu
To map ahead and reverse on the G923 in ATS, you will have to entry the sport’s controls menu. Observe these steps to take action:
- Begin American Truck Simulator.
- Click on on the “Choices” button in the principle menu.
- Choose the “Controls” tab.
Mapping Ahead and Reverse
As soon as you might be within the controls menu, you will notice an inventory of all the sport’s controls. Scroll down till you discover the “Ahead” and “Reverse” controls. By default, these controls are mapped to the “W” and “S” keys in your keyboard.
To map these controls to your G923, merely click on on the present key binding and press the button in your G923 that you simply need to use. You too can use the “Invert” checkbox to reverse the course of the controls.
| Management | Default Key Binding | G923 Button |
|---|---|---|
| Ahead | W | |
| Reverse | S |
After getting mapped the ahead and reverse controls to your G923, click on on the “Apply” button to save lots of your modifications. Now you can use your G923 to regulate your truck in ATS.
Navigating the G923 Keybinds
Understanding Button Assignments
The G923 racing wheel comes geared up with a variety of buttons and dials to boost your in-game expertise. Familiarizing your self with the default keybinds will aid you optimize your gameplay and make fast changes whereas racing.
Customizing Controls
To customise the keybinds in your G923, you possibly can entry the sport’s settings menu. Search for choices associated to “Controls” or “Key Mapping.” From there, you possibly can choose the particular motion you need to rebind and assign it to a button or dial of your selection.
Optimizing Gear Shifting
Correctly configuring the gear shifting controls is crucial for easy and environment friendly driving. The ahead and reverse controls are usually mapped to the paddle shifters behind the steering wheel. Nonetheless, you possibly can customise these bindings to fit your preferences.
Contemplate assigning the ahead and reverse paddles to the next keys:
| Path | Really useful Key |
|---|---|
| Ahead | Paddle on the correct (up) |
| Reverse | Paddle on the left (down) |
This association ensures that the gear shifting controls are intuitive and simply accessible whereas driving.
Default Ahead and Reverse Keybinds
By default, the ahead and reverse controls on the G923 are mapped to the next keys:
| Ahead | Reverse |
|---|---|
| PS Button | Share Button |
Customizing Keybinds
You may customise the ahead and reverse keybinds to fit your preferences. To do that, open the “Settings” menu in ATS and navigate to the “Controls” tab. Below the “Keyboard/Mouse” part, you’ll find the “Ahead” and “Reverse” keybinds.
To vary a keybind, merely click on on the present keybind and press the brand new key you need to use. You too can use the “Reset to Default” button to revive the default keybinds.
Superior Keybind Customization
Along with the essential ahead and reverse keybinds, you too can create extra superior keybinds utilizing the “Superior Keybind Settings” menu. This menu lets you create customized keybinds for particular actions, reminiscent of shifting gears or utilizing the handbrake.
To entry the “Superior Keybind Settings” menu, open the “Settings” menu in ATS and navigate to the “Controls” tab. Below the “Keyboard/Mouse” part, click on on the “Superior Keybind Settings” button.
The “Superior Keybind Settings” menu is a robust software that lets you customise the controls of ATS to your liking. With a bit of experimentation, you possibly can create a keybind setup that’s excellent on your driving type.
Figuring out the Reverse Gear Choice
Finding the reverse gear possibility in ATS with the G923 wheel could be essential for exact maneuvers. Listed here are a couple of steps that will help you establish it:
Deciding on the Reverse Gear Keybind
Within the Keyboard Mapping menu, you may discover an array of choices for assigning the reverse gear keybind. The important thing you select will decide the way you interact reverse in-game:
-
Devoted Reverse Key: Assign a particular key in your keyboard, such because the “R” key, solely for shifting into reverse.
-
Toggle Gearshift: This selection lets you use the identical keybind for each upshifting and downshifting by means of the gears, together with reverse. By default, the “X” key serves this objective.
-
Sequential Gearshift: This superior mode simulates a real-life sequential gearbox. You may want to make use of the “Up” and “Down” arrow keys to cycle by means of the gears, together with reverse.
As soon as you’ve got determined in your most well-liked methodology, click on on the corresponding textual content field and press the important thing you need to assign. The sport will show the keybind as you enter it, permitting you to verify your choice.
Confirming the Keybind Modifications
After getting accomplished the keybind mapping course of, it’s important to verify the modifications to make sure they’ve been utilized accurately. Listed here are some strategies you should utilize to confirm the keybind modifications:
-
In-Recreation Verification
Begin the sport and enter the settings or management choices menu. Navigate to the keybind part and verify if the ahead and reverse gear assignments have modified as supposed. You may check the bindings by urgent the mapped keys and observing the corresponding in-game actions.
-
Exterior Software program Verification
Use third-party software program or instruments particularly designed to verify and modify keybinds. These applications can present a complete overview of all assigned keys and will let you confirm the ahead and reverse gear mappings.
-
Bodily Commentary
For bodily verification, press the keys you could have mapped to ahead and reverse gear. Observe the habits of the automobile within the recreation. If the automobile strikes ahead once you press the assigned ahead key and strikes backward once you press the reverse key, the keybind modifications have been utilized efficiently.
By following these strategies, you possibly can make sure that your ahead and reverse gear keybinds have been mapped accurately and are working as supposed. This can improve your gameplay expertise and supply higher management over your automobile in American Truck Simulator.
Working towards Ahead and Reverse Management
As soon as you’ve got arrange your G923 steering wheel, it is time to follow controlling your automotive in-game. Start with a easy observe and automobile, step by step growing the issue as you develop into extra snug.
Begin by driving ahead in a straight line. As soon as you’ve got gotten a really feel for the steering and throttle, attempt making light turns. As you progress, try more difficult maneuvers like drifting and powerslides.
Reverse Parking
Parking in reverse could be daunting, particularly with a steering wheel. Here is a step-by-step information that will help you grasp this maneuver:
1. Strategy the parking house slowly and are available to a whole cease earlier than reversing.
2. Flip the steering wheel totally within the course you need the rear of the automotive to maneuver in the direction of.
3. Gently apply the throttle whereas constantly monitoring your environment by means of the rearview mirrors and aspect mirrors.
4. Because the rear of the automotive nears the sting of the parking house, start turning the steering wheel in the other way.
5. Proceed reversing till the automotive is totally parked, then straighten the steering wheel.
Keep in mind to follow in a protected surroundings the place you will not injury your automotive or others’ property. With constant follow, you may quickly develop into proficient at driving your automotive in-game utilizing the G923.
Optimizing the Sensitivity and Deadzone Settings
Sensitivity Settings
Adjusting the steering sensitivity will improve your management over the automotive’s dealing with. Too excessive settings can result in oversteering or spinning out, whereas too low settings could make it troublesome to navigate corners. Begin by setting the sensitivity to 50% and alter it in line with your choice and driving type.
Deadzone Settings
The deadzone determines the minimal enter required for the sport to register a steering motion. This setting is essential for decreasing undesirable sensitivity and stopping the sport from registering unintentional inputs from the wheel. Set the deadzone to round 10%, making certain that the wheel wants a slight rotation earlier than it begins turning the automotive.
Positive-Tuning the Deadzone
Precision and consistency in steering require meticulous deadzone changes. Listed here are some superior methods to optimize the settings:
- Create two consumer profiles with equivalent settings aside from the deadzone.
- Set one profile with a better deadzone (e.g., 30%) and the opposite with a decrease one (e.g., 5%).
- Use the excessive deadzone profile for parking, sluggish turns, and delicate maneuvers the place exact management is crucial.
- Change to the low deadzone profile for high-speed driving, the place extra aggressive steering inputs are required.
- Experiment with varied deadzone values inside these ranges till you discover the optimum settings on your driving habits.
Positive-tuning the deadzone can considerably enhance the general steering expertise in ATS, permitting you to grasp the challenges of the street with finesse and management.
Unlock Mapping Choices
Within the Logitech Gaming Software program (LGS), navigate to the “Steering Wheel” tab and choose your G923. Below “Controls,” click on on “Steering Wheel Settings.” Right here, you possibly can alter the vary of movement, centering spring energy, and different settings associated to the wheel’s movement.
Assign Ahead and Reverse Buttons
Now, let’s map the ahead and reverse actions to particular buttons on the G923. In the identical “Steering Wheel Settings” window, scroll all the way down to the “Buttons” part. Right here, you may see an inventory of all of the buttons obtainable on the wheel. Discover the buttons you need to map to ahead and reverse (e.g., “Gear Up” and “Gear Down”), and click on on the “Assign” button subsequent to them.
### Utilizing the Buttons
In ATS, the buttons you mapped will now management the ahead and reverse gear choice. You need to use both the “Gear Up” or “Gear Down” buttons to shift gears as wanted. Word that the default key bindings for gear shifting in ATS are “Q” for reverse and “Z” for ahead. In case you encounter any points with the button mapping, guarantee the important thing bindings are usually not conflicting.
Troubleshooting Ahead and Reverse Points
1. Confirm Button Mapping
Verify if in case you have accurately assigned the ahead and reverse buttons within the Logitech Gaming Software program. Make certain the suitable buttons are chosen, and the actions are mapped precisely.
2. Verify Key Bindings
In ATS, go to the “Settings” menu and choose “Controls.” Below the “Controls” tab, verify if the important thing bindings for reverse and ahead gears are set to the buttons you mapped within the LGS. If there are any conflicts, alter the important thing bindings accordingly.
3. Check Inputs
To check if the mapping and key bindings are working accurately, navigate to the “Testing” tab within the “Controls” menu in ATS. Choose the “Steering Wheel” possibility from the drop-down menu, and check the ahead and reverse inputs by urgent the corresponding buttons on the G923. If the inputs are usually not acknowledged, double-check the earlier troubleshooting steps and make any obligatory changes.
4. Replace Drivers
Be sure that your G923 drivers are updated. Go to Logitech’s web site, seek for your particular wheel mannequin, and obtain the newest drivers on your working system. Putting in the newest drivers can resolve any compatibility points or bugs associated to the enter mapping.
5. Reinstall Logitech Gaming Software program
If not one of the above steps resolve the problem, attempt reinstalling the Logitech Gaming Software program. Fully take away the prevailing model of the software program and obtain the newest model from Logitech’s web site. A recent set up will help eradicate any corrupted information or glitches that could be inflicting issues with the enter mapping.
6. Verify Recreation Settings
Be sure that the sport settings in ATS are configured accurately for the steering wheel. Within the “Choices” menu, choose the “Gameplay” tab and verify if the “Steering Wheel Assist” possibility is enabled. Moreover, alter the “Steering Sensitivity” and “Steering Nonlinearity” settings to fine-tune the wheel’s response.
7. Contact Logitech Assist
When you’ve got exhausted all of the troubleshooting steps and nonetheless encounter points, contact Logitech Assist for additional help. Present them with detailed details about the issue, together with the steps you could have taken and any error messages you could have encountered. They’ll information you thru further troubleshooting choices or assist decide whether or not the wheel might have a {hardware} defect that requires restore or alternative.
How To Map Ahead And Reverse On G923 In Ats
To map ahead and reverse on G923 in ATS, you will have to observe these steps:
- Join your G923 to your laptop.
- Open the ATS software program.
- Go to the “Controls” tab.
- Discover the “Throttle” part.
- Click on on the “Ahead” button.
- Transfer the throttle ahead in your G923.
- Click on on the “Reverse” button.
- Transfer the throttle backward in your G923.
- Click on on the “Apply” button.
Folks Additionally Ask
How do I calibrate my G923?
To calibrate your G923, you will have to observe these steps:
- Join your G923 to your laptop.
- Open the Logitech Gaming Software program.
- Click on on the “Settings” tab.
- Discover the “Calibration” part.
- Click on on the “Calibrate” button.
- Observe the directions on the display screen.
How do I program my G923 buttons?
To program your G923 buttons, you will have to observe these steps:
- Join your G923 to your laptop.
- Open the Logitech Gaming Software program.
- Click on on the “Settings” tab.
- Discover the “Buttons” part.
- Click on on the button you need to program.
- Choose the operate you need to assign to the button.
- Click on on the “Apply” button.
How do I replace the firmware on my G923?
To replace the firmware in your G923, you will have to observe these steps:
- Join your G923 to your laptop.
- Open the Logitech Gaming Software program.
- Click on on the “Settings” tab.
- Discover the “Firmware” part.
- Click on on the “Replace” button.
- Observe the directions on the display screen.
