Embark on a complete journey of unlocking the interior workings of your PlayStation 5 controller. Whether or not it is to switch worn-out elements, improve its performance, or just fulfill your curiosity, this detailed information will empower you with the data and abilities essential to open the PS5 controller with ease.
Earlier than embarking on this job, it is paramount to assemble the mandatory instruments. Procure a small Phillips #0 screwdriver and a plastic spudger or pry instrument. Moreover, guarantee that you’ve enough lighting and a snug workspace. Keep in mind, opening the PS5 controller can void your guarantee, so proceed with warning and comply with the directions meticulously.
With the suitable preparation in place, it is time to delve into the disassembly course of. Fastidiously flip the controller over and find the 4 screws securing the again plate. Make use of your Phillips #0 screwdriver to take away these screws and set them apart in a secure place. As soon as the screws are eliminated, gently pry aside the again plate utilizing the plastic spudger, taking care to not injury the fragile elements inside. As you elevate the again plate, disconnect the battery ribbon cable by rigorously prying it up with the spudger. And there you will have it, the interior workings of your PS5 controller lie earlier than you, prepared for exploration and customization.
Step-by-Step Information to Opening a PS5 Controller
1. Security Precautions and Instruments
Earlier than embarking on the journey of disassembling your PS5 controller, it’s crucial to prioritize security and guarantee you will have the mandatory instruments for the duty. Security first! Energy down and unplug your controller to keep away from any electrical hazards. Defend your work floor with a delicate fabric or anti-static mat to stop scratches or injury to the controller.
Important instruments for the job:
| Device | Function |
|---|---|
| Philips #00 Screwdriver | Eradicating screws |
| Plastic Spudger or Pry Bar | Separating elements |
| Anti-Static Wrist Strap (Optionally available) | Defending in opposition to electrostatic discharge |
2. Eradicating the Faceplate
With the protection precautions in place and instruments on the prepared, it is time to embark on the disassembly course of. Start by rigorously flipping the controller over, revealing the underside cowl. Find and unscrew the 5 Philips screws securing the faceplate to the controller housing. These screws are usually hid beneath rubber pads, so gently pry them off to entry the screws.
3. Separating the Controller
As soon as the screws are eliminated, the faceplate will be lifted away from the controller. Use a plastic spudger or pry bar to softly pry alongside the sides to separate the 2 halves. Be affected person and keep away from utilizing extreme drive to stop injury.
4. Disconnecting the Battery
With the controller separated, disconnect the battery by rigorously unplugging the connector. This may stop any residual cost from interfering together with your work.
5. Eradicating the Motherboards
Find the 4 screws securing the primary motherboard to the controller housing and take away them. The motherboard can then be lifted away, exposing the sub-motherboard beneath. Disconnect the ribbon cable connecting the 2 motherboards.
6. Eradicating the Buttons and Triggers
To entry the buttons and triggers, you will have to take away the set off springs. Find the small indentations on the triggers and use a plastic spudger to softly pry the springs up. As soon as the springs are eliminated, the triggers will be lifted away from the controller. The buttons will be eliminated in an analogous method by prying them out utilizing a plastic spudger.
7. Reassembly
As soon as all of the elements have been eliminated, reassembly is just a matter of reversing the disassembly steps. Be sure you reconnect all connectors and align elements correctly earlier than securing them with screws.
Security Precautions Earlier than Opening
Earlier than embarking on the method of opening your PS5 controller, it’s essential to prioritize security. Listed below are some important precautions to comply with:
Disconnect the Controller
Be sure that the controller is disconnected from any energy supply or gaming console. This may stop potential electrical hazards throughout the disassembly course of.
Collect Essential Instruments
Purchase an acceptable set of small screwdrivers particularly designed for electronics. Keep away from utilizing overly giant or inappropriate instruments, as they may injury the controller’s delicate elements.
Anti-Static Measures
To guard the controller from electrostatic discharge (ESD), think about using an anti-static wrist strap. Alternatively, you’ll be able to discharge any static electrical energy by touching a grounded steel object earlier than dealing with the controller.
Clear Work Space
Put together a clear and well-lit workspace to attenuate contamination and make the restore course of extra environment friendly. A delicate, non-abrasive floor is good for putting the controller throughout disassembly.
Warning Throughout Dealing with
Deal with the controller and its elements with utmost care. Keep away from touching delicate circuitry or connectors, as mishandling may cause injury.
Take Your Time
Method the disassembly course of with endurance and keep away from dashing. Take note of the position of screws and elements to facilitate reassembly in a while.
Eradicating the Faceplate
Unveiling the interior workings of your PS5 controller begins with eradicating the faceplate. Comply with these steps with care to keep away from injury:
- Flip the controller the other way up, revealing the underside edge.
- Use a small, flathead screwdriver or a plastic pry instrument (like a guitar choose) to rigorously insert into the small slot close to the L2 and R2 shoulder buttons.
- Gently pry the faceplate up, ranging from the underside edge. Keep away from extreme drive to stop breaking the clips.
-
Separating the Entrance and Again Plates
After efficiently eradicating the faceplate, you may encounter a skinny ribbon cable connecting the back and front plates. Deal with this cable with excessive warning to keep away from any injury:
- Establish the ribbon cable connector situated close to the highest of the controller. It ought to have a small black lever.
- Utilizing a pair of tweezers or your fingernails, gently elevate the lever and disconnect the ribbon cable.
- Be affected person and take your time to keep away from tearing the cable.
- Proceed prying the faceplate aside, rigorously separating the back and front plates.
- Lay the again plate apart and set the faceplate apart for reassembly later.
Disconnecting the Battery
Disconnecting the battery is a vital step to keep away from any electrical accidents or injury to the controller. Comply with these detailed directions to make sure a secure and correct process:
- Find the small screw below the L2 set off button.
- Utilizing a Philips #00 screwdriver, unscrew and take away the screw.
Step 3 Description Grasp the battery gently and pull it barely towards you. The battery ought to disconnect easily from the connector. **Observe:** Be cautious to not apply extreme drive when pulling the battery, as it could injury the connector or the battery itself.
- Examine the battery and the connector for any seen injury.
- If essential, clear the connector with a lint-free fabric or cotton swab dipped in isopropyl alcohol.
Eradicating the Backside Screws
The following step is to take away the 4 backside screws that maintain the controller collectively. These screws are situated on the underside of the controller, two on either side. You will want a Phillips #00 screwdriver to take away these screws.
Detailed Directions:
- Find the 4 backside screws: Flip the controller over and face the underside. The 4 screws are situated within the heart of the controller, two on either side.
- Use the proper screwdriver: Insert a Phillips #00 screwdriver into the primary screw.
- Flip counterclockwise: Slowly flip the screwdriver counterclockwise to loosen the screw. Don’t overtighten or strip the screw.
- Take away the screw: As soon as the screw is unfastened, rigorously take away it utilizing the screwdriver.
- Repeat for the opposite three screws: Repeat steps 2-4 for the remaining three screws.
- Put aside the screws: Place the screws in a secure place to keep away from dropping them throughout reassembly.
Screw Dimension Amount Phillips #00 4 Opening the Controller Shell
To open the PS5 controller shell, you may want a Philips #00 screwdriver and a plastic spudger or pry instrument. Comply with these steps rigorously:
- Take away the 4 screws: On the again of the controller, behind the handgrips, you may see 4 Philips #00 screws. Unscrew and set them apart.
- Pry open the shell: Use the plastic spudger to softly pry open the shell alongside the seam. Begin on the prime and work your means round.
- Disconnect the battery: As soon as the shell is open, you may see the battery related to the motherboard by a pink and black wire. Unplug the battery by pulling the connector straight up.
- Take away the motherboard: Holding the motherboard by the perimeters, rigorously elevate it up and out of the shell.
- Disconnect the buttons: Now you may must disconnect the buttons from the motherboard. Use the spudger to softly pry up the connectors for every button.
- Take away the analog sticks: Pull out the analog sticks from the motherboard. They might be held in place by a small screw, so unscrew it if essential.
- Detach the triggers:
Set off Detachment Steps R2/L2 Pull the set off in the direction of you till it unhooks from the motherboard.
Find the small spring contained in the set off and take away it.
R1/L1 Flip the motherboard over and discover the R1/L1 triggers.
Use the spudger to softly pry the triggers away from the motherboard.
Disassembling the Inner Elements
After getting efficiently eliminated the again casing, you’ll be able to proceed with disassembling the interior elements of the controller. Earlier than doing so, guarantee that you’ve a transparent and arranged workspace to stop any loss or misplacement of components.
Here’s a detailed breakdown of the steps concerned in disassembling the interior elements:
- Eradicating the Battery: Find the battery, which is a rectangular-shaped element secured by a screw. Unscrew the screw and punctiliously disconnect the battery from the controller.
- Detaching the Haptic Suggestions Motors: Establish the 2 haptic suggestions motors, that are situated on both aspect of the battery. Disconnect the motors by rigorously unplugging their connectors.
- Unscrewing the Motherboard: Find the seven screws holding the motherboard in place. Fastidiously unscrew these screws and gently elevate the motherboard to detach it from the controller.
- Separating the Prime and Backside Shells: As soon as the motherboard is eliminated, you may be left with the highest and backside shells of the controller. Gently pull the 2 shells aside to separate them.
- Eradicating the Buttons: The buttons on the controller are secured by small screws. Unscrew these screws and take away the buttons rigorously.
- Detaching the Joysticks: The joysticks are hooked up to the highest shell. Fastidiously unscrew the screws holding the joysticks in place and detach them from the controller.
- Extracting the Analog Sticks: The analog sticks are situated throughout the joysticks. Gently take away the rubber caps from the joysticks and pull out the analog sticks.
- Disconnecting the Set off Buttons: The set off buttons are situated on the again of the controller. Fastidiously unclip the triggers and disconnect them from the controller.
- Eradicating the Microphone and USB Port: The microphone and USB port are situated on the underside shell. Unscrew the screws holding the microphone and USB port in place and punctiliously detach them from the controller.
- Separating the Audio system: The audio system are situated on the underside shell. Fastidiously disconnect the audio system from the controller by unplugging their connectors.
After getting efficiently disassembled the interior elements, you’ll be able to examine the components for any injury or put on. If essential, you’ll be able to clear or exchange any defective elements to revive the controller’s performance.
Reassembling the Controller
Earlier than beginning the reassembly course of, ensure you have all the mandatory instruments and screws. Consult with the desk beneath for the proper screws and their positions.
Screw Kind Place Phillips #00 Deal with, Facet Plates, Set off Extenders Torx T8 Battery Cowl To reassemble the controller, comply with these steps:
-
Align the Set off Extenders: Place the set off extenders onto the triggers, guaranteeing that they match snugly.
-
Connect the Facet Plates: Align the aspect plates with the deal with and safe them utilizing the 4 #00 Phillips screws.
-
Exchange the Battery Cowl: Repair the battery cowl onto the again of the deal with utilizing the Torx T8 screw.
-
Insert the Set off Buttons: Slide the set off buttons into their slots till they click on into place.
-
Join the Buttons: Press the buttons (cross, circle, triangle, sq., L1, L2, R1, R2, Share, Choices, PS) onto their respective contacts.
-
Connect the Gentle Bar: Insert the sunshine bar into its slot and safe it with the #00 Phillips screw.
-
Join the Battery: Slide the battery into the battery compartment and join it to the motherboard.
-
Reassemble the Case: Match the highest and backside halves of the controller collectively and safe them with the remaining #00 Phillips screws.
-
Confirm Performance: Join the controller to your PlayStation 5 or a appropriate machine to make sure that all buttons and functionalities are working accurately.
Step 1: Collect Essential Instruments
Assemble a plastic opening instrument, a #000 Phillips head screwdriver, and a pair of tweezers.
Step 2: Take away the Again Panel Screws
Use the Phillips head screwdriver to take away the 5 screws securing the again panel.
Step 3: Pry Open the Again Panel
Fastidiously insert the plastic opening instrument into the seam between the again panel and the controller physique. Gently pry the again panel unfastened.
Step 4: Disconnect the Battery
Find the battery connector and gently pull it straight as much as disconnect the battery.
Step 5: Take away the Set off Buttons
Use the tweezers to elevate the set off buttons out of their sockets.
Step 6: Take away the Ribbon Cable Connectors
Disconnect the ribbon cable connectors for the motherboard, touchpad, and light-weight bar.
Step 7: Elevate the Motherboard Out
Fastidiously elevate the motherboard out of the controller physique.
Step 8: Troubleshoot the Subject
Examine the motherboard for any apparent points, akin to unfastened elements or damaged traces.
Step 9: Reassemble the Controller
Reverse the disassembly steps to reassemble the controller.
Suggestions for a Profitable DIY Restore
1. Keep away from Static Electrical energy
Deal with digital elements with care to stop injury from static electrical energy.
2. Use Correct Instruments
Make the most of the proper instruments to make sure exact disassembly and meeting.
3. Take Your Time
Do not rush the method; take your time to rigorously comply with the steps.
4. Doc the Course of
Take photos or make notes as you disassemble the controller for simpler reassembly.
5. Clear the Elements
If essential, use isopropyl alcohol to softly clear the elements earlier than reassembly.
6. Take a look at Earlier than Reassembly
Earlier than utterly reassembling the controller, take a look at the elements to make sure they’re functioning correctly.
7. Use a Magnifying Glass
Examine small elements and connectors carefully utilizing a magnifying glass.
8. Consult with On-line Assets
Seek the advice of on-line tutorials or boards for extra steering.
9. Search Skilled Assist if Wanted
In the event you encounter any difficulties or the restore is past your experience, do not hesitate to hunt skilled help.
10. Endurance and Precision
Performing DIY repairs requires endurance and precision. Take your time and punctiliously comply with the directions for a profitable consequence.
How To Open Ps5 Controller
To open a PS5 controller, you will have a small Phillips head screwdriver. First, take away the 4 screws on the again of the controller, being cautious to not strip the screws. As soon as the screws are eliminated, you’ll be able to gently pry the 2 halves of the controller aside. Watch out to not injury the ribbon cable that connects the 2 halves of the controller.
As soon as the controller is open, you’ll be able to entry the battery, triggers, buttons, and different inner elements. Now you can clear the controller, exchange worn-out components, or carry out different repairs.
Individuals Additionally Ask
Find out how to change the battery in a PS5 controller?
To alter the battery in a PS5 controller, you will have a small Phillips head screwdriver. First, take away the 4 screws on the again of the controller, being cautious to not strip the screws. As soon as the screws are eliminated, you’ll be able to gently pry the 2 halves of the controller aside. Watch out to not injury the ribbon cable that connects the 2 halves of the controller.
As soon as the controller is open, you’ll be able to take away the previous battery and exchange it with a brand new one. Be sure you insert the brand new battery within the right orientation. As soon as the brand new battery is put in, you’ll be able to reassemble the controller and tighten the screws.
Find out how to repair drifting analog sticks on a PS5 controller?
Drifting analog sticks are a standard downside with PS5 controllers. To repair this downside, you’ll be able to strive cleansing the analog sticks with a cotton swab and rubbing alcohol. If this doesn’t work, you could want to switch the analog sticks. You should purchase substitute analog sticks on-line or at an area electronics retailer.
Find out how to join a PS5 controller to a PC?
To attach a PS5 controller to a PC, you will have a USB-C cable. Join the USB-C cable to the controller and to a USB port in your PC. As soon as the controller is related, you will have to put in the PS5 controller driver. You possibly can obtain the motive force from the PlayStation web site.
