Whether or not you are upgrading your graphics card or troubleshooting an issue, understanding the best way to take away it safely and effectively is important. Graphic playing cards are delicate parts, so it is vital to take care when dealing with them. On this information, we’ll stroll you thru the step-by-step means of eradicating a graphics card out of your laptop, making certain that you simply do it with out inflicting any harm.
Earlier than you start, energy down your laptop and unplug it from the facility outlet. This may stop any electrical shocks or harm to the parts. Subsequent, open your laptop case and find the graphics card. It is going to sometimes be put in in a PCI Categorical (PCIe) slot on the motherboard. As soon as you’ve got discovered the graphics card, you will have to launch the retaining clip that holds it in place. The clip is often positioned on the finish of the PCIe slot, and it may be launched by urgent down on it or sliding it to the facet.
As soon as the retaining clip is launched, you possibly can fastidiously pull the graphics card straight up and out of the PCIe slot. Make sure you assist the cardboard along with your different hand to stop it from bending or breaking. If the cardboard is caught, don’t pressure it. As a substitute, verify to make it possible for the entire retaining clips are launched and that there are not any cables or different obstructions stopping the cardboard from being eliminated. With the graphics card eliminated, now you can proceed along with your improve or troubleshooting.
Eradicating the Screws
The following step in eradicating your graphics card is to find and take away the screws which might be holding it in place. These screws are sometimes positioned on the again of the cardboard, close to the I/O panel. They’re often small, Phillips-head screws, however they could range relying on the make and mannequin of your graphics card. To take away the screws, you will want a small Phillips-head screwdriver.
After getting positioned the screws, fastidiously unscrew them. Make sure you assist the graphics card along with your different hand as you do that, in order that it doesn’t fall out of the slot. As soon as the screws are eliminated, you possibly can gently pull the graphics card straight out of the PCIe slot. Watch out to not bend or harm the cardboard as you do that.
| Screw Location | Screw Sort | Screwdriver Required |
|---|---|---|
| Again of the graphics card, close to the I/O panel | Phillips-head screw | Phillips-head screwdriver |
Further suggestions for eradicating the screws:
- If you’re having bother eradicating the screws, attempt utilizing a magnetic screwdriver. This may assist to maintain the screws from falling out as you unscrew them.
- Watch out to not overtighten the screws while you reinstall the graphics card. This may harm the cardboard or the motherboard.
- When you lose any of the screws, you possibly can often discover replacements at your native ironmongery store.
Pulling the Card Out
As soon as the cardboard is unlocked, you possibly can fastidiously pull it out of the motherboard slot. To do that, grasp the cardboard by the highest and backside edges and gently rock it backwards and forwards till it comes unfastened. Don’t pull on the cardboard by the wires or connectors, as this might harm them.
As soon as the cardboard is unfastened, carry it straight up and out of the slot. Watch out to not bend or harm the cardboard as you take away it.
Listed here are some further suggestions for pulling the cardboard out:
- If the cardboard is caught, don’t pressure it. Gently rock it backwards and forwards till it comes unfastened.
- Don’t contact the gold contacts on the cardboard.
- If you’re having bother eradicating the cardboard, you need to use a small flat-head screwdriver to softly pry it out of the slot.
As soon as the cardboard is eliminated, you possibly can retailer it in an anti-static bag till you might be prepared to put in it in one other laptop.
Cleansing the Slot
As soon as you’ve got eliminated your graphics card, it is a good suggestion to wash the slot it was put in in. Over time, mud and particles can construct up within the slot, which may trigger issues with the connection between your graphics card and your motherboard. To wash the slot, use a smooth, dry material or a compressed air can. Watch out to not harm the slot or its parts.
If the slot is especially soiled, you might want to make use of a cotton swab dipped in isopropyl alcohol to wash it. Make sure you let the alcohol dry utterly earlier than reinserting your graphics card.
Further Suggestions for Cleansing the Slot
- Use a flashlight to examine the slot for any particles or harm.
- When you’re utilizing a compressed air can, maintain it upright and spray in brief bursts. Keep away from spraying instantly into the slot.
- When you’re utilizing a cotton swab dipped in isopropyl alcohol, make sure you wring out the swab earlier than inserting it into the slot.
- Let the alcohol dry utterly earlier than reinserting your graphics card.
How To Take away Graphic Card
Earlier than you start, energy down your laptop and unplug it from the facility outlet. You will additionally have to discharge any static electrical energy by touching a metallic object like a doorknob or radiator.
Subsequent, find the graphics card. It is going to often be the most important card in your laptop, and it’ll have plenty of ports on the again for connecting screens. As soon as you’ve got discovered the graphics card, you can begin eradicating it.
To take away the graphics card, first take away the screws which might be holding it in place. There’ll often be two or three screws, positioned on the again of the pc. As soon as the screws are eliminated, you possibly can gently pull the graphics card straight out of the slot.
If the graphics card is caught, you might want to make use of a screwdriver to softly pry it unfastened. Watch out to not harm the graphics card or the motherboard.
As soon as the graphics card is eliminated, you possibly can disconnect the facility cables from the again of the cardboard. There’ll often be one or two energy cables, relying on the kind of graphics card.
Now you possibly can set up your new graphics card. To do that, merely insert the brand new card into the slot on the motherboard and tighten the screws. Then, join the facility cables to the again of the cardboard. Lastly, energy in your laptop and set up the drivers in your new graphics card.
