When your Fantech HP 2113 fan motor fails, it isn’t only a matter of discomfort; it could possibly additionally result in well being issues. Changing the motor is an easy job that may be accomplished in beneath an hour with the suitable instruments and supplies. Observe these step-by-step directions to get your fan up and operating once more very quickly.
First, you will want to collect your instruments and supplies. You will want a brand new Fantech HP 2113 fan motor, a screwdriver, a wire cutter/stripper, and electrical tape. Upon getting your instruments and supplies, you are prepared to start.
To start, flip off the ability to the fan on the circuit breaker. Then, take away the entrance grille of the fan by unscrewing the screws that maintain it in place. As soon as the grille is eliminated, you will have entry to the fan motor. Disconnect the wires from the previous motor and take away the mounting screws. Lastly, set up the brand new motor and reconnect the wires. As soon as the brand new motor is put in, activate the ability to the fan and check it to ensure it is working correctly.
Security Precautions
- Flip Off the Energy: Earlier than trying any work on the fan, it’s essential to make sure that the ability supply is disconnected. This implies flipping the circuit breaker or eradicating the fuse related to the fan. This eliminates the chance {of electrical} shock and makes the workspace protected.
To confirm that the ability is off, use a non-contact voltage tester to test the wires resulting in the fan. Make sure that the tester signifies no voltage earlier than continuing.
Moreover, be certain that the fan isn’t spinning. Whether it is, permit it to return to an entire cease earlier than beginning work. This prevents damage from transferring elements.
-
Put on Protecting Gear: To attenuate the chance of damage, equip your self with acceptable protecting gear earlier than beginning work. This consists of security glasses to protect your eyes from particles and free elements, and gloves to guard your arms from sharp edges and electrical elements.
-
Safe Entry to the Fan: Guarantee you will have sufficient entry to the fan motor. If mandatory, take away any obstructions or panels that block your path. Make the most of ladders, stools, or platforms to achieve the fan safely, guaranteeing stability and minimizing the chance of falls.
-
Put together Instruments and Supplies: Earlier than beginning the alternative course of, collect all the mandatory instruments and supplies, together with a brand new fan motor, screwdriver, wire cutters, electrical tape, and a voltage tester. Having every part organized and inside attain streamlines the method and enhances security.
Gathering Needed Instruments and Supplies
Earlier than embarking on the duty of changing your Fantech HP 2113 fan motor, it is essential to collect all of the important instruments and supplies. This is a complete record to make sure you have every part at hand:
Instruments:
| Screwdriver Set: | Consists of Phillips and flathead screwdrivers in varied sizes. |
|---|---|
| Adjustable Wrench: | Adjustable wrench to securely maintain and loosen nuts and bolts. |
| Pry Bar: | Skinny, flat software to rigorously pry aside elements. |
| Measuring Tape: | To measure the scale of the fan motor and decide the right alternative measurement. |
| Electrical Tester: | Non-obligatory however really useful to test electrical connections. |
Supplies:
- Alternative fan motor: Guarantee compatibility with the Fantech HP 2113 mannequin.
- Electrical tape: To securely insulate electrical connections.
- Wire connectors: To attach the fan motor wires to {the electrical} system.
- Mounting screws: New screws to securely fasten the alternative fan motor.
- Anti-seize compound: Non-obligatory however extremely really useful to stop seizing and corrosion of bolts and nuts.
Disassembling the Fan Physique
3. Eradicating the Motor
1. Upon getting eliminated the screws, gently elevate the entrance half of the fan physique away from the again half. Watch out to not injury the wires hooked up to the motor.
2. Find the 2 screws that maintain the motor in place. These screws are often positioned on the again of the motor.
3. Utilizing a Phillips screwdriver, take away the 2 screws.
4. Fastidiously elevate the motor out of the fan physique. Watch out to not injury the wires hooked up to the motor.
Figuring out the Motor
The Fantech HP 2113 fan motor is a 1/25 horsepower, 120-volt, single-phase motor. It has a black plastic housing and a spherical, metallic finish cap. The motor has two wires linked to it, a black wire and a white wire.
| Wire Coloration | Terminal |
| Black | L1 |
| White | L2 |
Eradicating the Previous Fan Motor
Earlier than you begin, be sure to disconnect the ability to the fan. You are able to do this by turning off the circuit breaker or eradicating the fuse that powers the fan.
As soon as the ability is disconnected, you can begin eradicating the previous fan motor. Listed here are the steps:
- Take away the screws that maintain the fan motor in place. The screws are often positioned on the again of the fan motor.
- As soon as the screws are eliminated, you possibly can pull the fan motor out of the fan housing. Watch out to not injury the wires when you’re pulling the fan motor out.
- Disconnect the wires from the fan motor. The wires are often linked to the fan motor with wire nuts. Twist the wire nuts counterclockwise to disconnect the wires.
- **Disconnect the capacitor (if any). If the fan is provided with a further capacitor, it might be cylindrical in form and have two wires linked to it. Take away the wires by twisting the wire nuts (or unscrewing the terminals) counterclockwise. Use insulated pliers for this step, because the capacitor should still maintain {an electrical} cost.**
- As soon as the wires are disconnected, you possibly can take away the previous fan motor from the fan housing.
Making ready the New Fan Motor
1. Examine the Motor
Unpack the brand new motor and completely examine it for any injury. Examine the bearings, housing, and electrical connections for any abnormalities or defects. If you happen to discover any points, contact the producer or provider instantly.
2. Clear the Motor Floor
Use a clear fabric dampened with isopropyl alcohol to softly wipe down the motor floor. This may take away any grime, mud, or particles that will intervene with its efficiency or set up.
<3. Lubricate the Bearings (if mandatory)
Some fan motors might include pre-lubricated bearings. Nonetheless, if the bearings require lubrication, use a high-quality bearing lubricant and apply it sparingly to the bearing surfaces.
4. Examine the Electrical Connections
Confirm that {the electrical} connections on the brand new motor match the prevailing wiring. Make sure that the terminals are clear and freed from corrosion. If mandatory, use a wire brush or sandpaper to wash the terminals earlier than connecting the wires.
5. Detailed Inspection and Testing
| Element | Inspection Factors | Testing |
|---|---|---|
| Bearings | Clean rotation, no noise or vibration | Guide rotation to make sure easy operation |
| Electrical connections | Safe and corrosion-free | VOM (Volt-Ohm Meter) continuity check |
| Housing | No cracks, injury, or deformation | Visible inspection |
| Impeller | Stability and alignment | Spin the impeller by hand to test for any wobble |
| Wiring | Appropriate gauge, insulation, and size | Visible inspection and continuity check |
Putting in the New Fan Motor
With the wiring full, it is time to set up the brand new fan motor. Start by sliding the motor into the fan housing. Make sure that the motor shaft is correctly aligned with the fan blades.
6. Safe the Fan Motor
Safe the fan motor to the fan housing utilizing the equipped bolts or screws. Tighten the bolts or screws evenly to make sure a safe match. It’s essential to make sure that the motor is firmly mounted to stop any vibrations or noise throughout operation.
| Tip | Description |
|---|---|
| Examine Alignment | Earlier than tightening the bolts or screws, re-check that the motor shaft is correctly aligned with the fan blades. Misalignment can result in vibrations and untimely fan failure. |
| Use a Torque Wrench | For optimum tightening, use a torque wrench to use the required torque to the bolts or screws. This ensures the motor is securely mounted with out overtightening. |
| Securely Tighten | Tighten the bolts or screws firmly, however keep away from extreme pressure. Overtightening can injury the bolts or screw threads and compromise the fan’s security. |
As soon as the fan motor is securely mounted, reconnect {the electrical} wires to the terminal block. Double-check the connections to make sure they’re tight and safe.
Putting in the Fan Motor
As soon as the brand new fan motor is in place, you can begin reassembling the fan physique. Start by aligning the motor shaft with the impeller hub. Slide the impeller onto the shaft and tighten the set screw. Make sure to use a torque wrench to make sure that the set screw is correctly tightened.
Connecting the Wires
Subsequent, join the wires from the fan motor to the terminal block. Match the wires in response to their shade and tighten the screws to safe the connections. Check with the wiring diagram for steering.
Inserting the Fan Blades
As soon as the wires are linked, insert the fan blades into the slots on the impeller. Align the blades with the corresponding slots and push them in till they snap into place. Guarantee that the blades are securely seated.
Putting in the Grill
Place the grill over the fan physique and align the screw holes. Safe the grill utilizing the screws supplied.
Putting in the Mounting Bracket
Connect the mounting bracket to the fan physique utilizing the bolts supplied. The mounting bracket will will let you mount the fan to a wall or ceiling.
Lubricating the Fan
So as to guarantee easy operation and longevity, lubricate the fan bearings. Apply a small quantity of lithium-based grease to the bearings and rotate the impeller by hand to distribute the grease evenly.
Checking the Operation
Earlier than mounting the fan, check it to ensure it’s working appropriately. Join the fan to an influence supply and switch it on. Hear for any uncommon noises or vibrations. If every part sounds and feels regular, you possibly can proceed with mounting the fan.
Electrical Wiring and Connections
{The electrical} wiring and connections for a Fantech HP 2113 fan motor are easy. Observe these steps to make sure a correct set up:
Step 1: Flip Off Energy
Earlier than beginning any electrical work, all the time flip off the ability to the fan on the circuit breaker or fuse field.
Step 2: Disconnect Previous Wires
Find {the electrical} field on the fan housing and take away the quilt. Disconnect the wires linked to the previous motor. Observe the colour of every wire and its corresponding terminal.
Step 3: Join New Wires
Join the wires from the brand new motor to the corresponding terminals within the electrical field. Use wire nuts to safe the connections and guarantee a good match.
Step 4: Safe Wiring
Safe the wiring inside {the electrical} field utilizing cable clamps or wire ties. This may stop the wires from transferring and probably inflicting a brief circuit.
Step 5: Grounding
Make sure that the inexperienced or naked wire coming from the motor is linked to the bottom screw within the electrical field. This offers a security measure by diverting any stray electrical present to the bottom.
Step 6: Substitute Cowl
Substitute the quilt on {the electrical} field and safe it tightly.
Step 7: Check Motor
Activate the ability to the fan and test if the brand new motor is working easily. If there may be any noise or vibration, double-check your connections.
Step 8: Motor Specs
The Fantech HP 2113 fan motor sometimes has the next specs:
| Attribute | Worth |
|---|---|
| Voltage | 120 V AC |
| Energy | 1/2 HP |
| RPM | 1140 |
| Body Measurement | 56 |
Testing the Fan Motor
To check the fan motor, you will have a multimeter.
- Unplug the fan from the ability supply.
- Set the multimeter to the ohms setting.
- Contact the probes of the multimeter to the terminals of the fan motor.
- The multimeter ought to learn a resistance of round 10 ohms.
- If the multimeter reads infinity, the fan motor is open.
- If the multimeter reads 0 ohms, the fan motor is shorted.
- If the multimeter reads a resistance of round 10 ohms, the fan motor is sweet.
Extra Data
The next desk offers further details about testing a fan motor:
| Fan Motor Check Outcomes | |||
|---|---|---|---|
| Resistance | Open | Shorted | Good |
| Multimeter Studying | Infinity | 0 ohms | Round 10 ohms |
Troubleshooting
If you happen to’re having hassle changing your Fantech HP 2113 fan motor, there are some things you possibly can test:
- Guarantee that the ability to the fan is turned off.
- Examine the wiring to guarantee that it’s correctly linked.
- Examine the fan motor for any injury.
If you happen to’ve checked all of this stuff and you are still having hassle, you could have to contact a professional electrician for assist.
Observe-Up Upkeep
As soon as you have changed your Fantech HP 2113 fan motor, it is necessary to carry out common upkeep to maintain it operating easily.
- Clear the fan blades and housing repeatedly to take away any mud or particles.
- Lubricate the fan motor bearings each six months.
- Examine the fan belt for put on and tear, and exchange it if mandatory.
By following these easy upkeep ideas, you possibly can assist prolong the lifetime of your Fantech HP 2113 fan motor.
10. Extra Upkeep Ideas
Along with the upkeep ideas listed above, listed here are just a few extra issues you are able to do to maintain your Fantech HP 2113 fan motor operating easily:
| Tip | Description |
|---|---|
| Use a surge protector | This may assist defend your fan motor from energy surges. |
| Do not overload the fan | Guarantee that the fan isn’t pulling an excessive amount of air, as this will trigger the motor to overheat. |
| Hold the world across the fan clear | Mud and particles can construct up on the fan motor, which might trigger it to overheat. |
How To Substitute A Fantech Hp 2113 Fan Motor
Changing a Fantech HP 2113 fan motor is an easy course of that may be accomplished in a matter of minutes. By following the steps outlined under, you possibly can be certain that your fan is up and operating once more very quickly.
Step 1: Security First
Earlier than you start, be sure to show off the ability to the fan on the circuit breaker or fuse field. This may stop any electrical accidents from occurring.
Step 2: Take away the Fan Blade
Utilizing a screwdriver, take away the screws that maintain the fan blade in place. As soon as the screws are eliminated, rigorously pull the fan blade straight off the motor shaft.
Step 3: Disconnect the Wiring
Find the wiring harness that connects the fan motor to the ability provide. Utilizing pliers, rigorously disconnect the wires from the motor terminals. Make sure to observe which wire goes to which terminal with the intention to reconnect them appropriately later.
Step 4: Take away the Motor
Utilizing a wrench, take away the bolts that maintain the motor in place. As soon as the bolts are eliminated, it is best to be capable of pull the motor straight out of the housing.
Step 5: Set up the New Motor
Insert the brand new motor into the housing and safe it in place with the bolts. Make sure to tighten the bolts till they’re cosy, however don’t overtighten them.
Step 6: Reconnect the Wiring
Reconnect the wires to the motor terminals, ensuring that every wire goes to the right terminal. Safe the wires in place with the wire nuts.
Step 7: Set up the Fan Blade
Slide the fan blade onto the motor shaft and safe it in place with the screws. Make sure to tighten the screws till they’re cosy, however don’t overtighten them.
Step 8: Activate the Energy
Activate the ability to the fan on the circuit breaker or fuse field. The fan ought to now be up and operating once more.
Individuals Additionally Ask About How To Substitute A Fantech Hp 2113 Fan Motor
How do I do know if my Fantech HP 2113 fan motor is unhealthy?
There are just a few indicators that may point out that your Fantech HP 2113 fan motor is unhealthy. These embody:
- The fan is making a loud noise.
- The fan isn’t transferring air in addition to it used to.
- The fan is overheating.
- The fan isn’t turning on.
Can I exchange the fan motor myself?
Sure, you possibly can exchange the fan motor your self. Nonetheless, in case you are not comfy working with electrical gadgets, it’s best to rent a professional electrician to do the job.
How a lot does it value to exchange a Fantech HP 2113 fan motor?
The price of changing a Fantech HP 2113 fan motor will differ relying on the price of the motor itself and the labor prices of the electrician. Nonetheless, you possibly can count on to pay between $100 and $200 for the whole job.
