## Substitute Antenna 2013 Dodge Dart
In case your 2013 Dodge Dart’s antenna is damaged or broken, you’ll be able to substitute it your self with a couple of easy instruments. The method is comparatively simple and will be accomplished in about half-hour. Earlier than you start, you will want to assemble a couple of provides, together with a brand new antenna, a Phillips head screwdriver, and a pair of needle-nose pliers.
Step one is to take away the previous antenna. To do that, use the Phillips head screwdriver to take away the 2 screws that maintain the antenna base in place. As soon as the screws are eliminated, you’ll be able to pull the antenna base straight as much as take away it from the automobile.
Subsequent, you will want to put in the brand new antenna. To do that, merely insert the brand new antenna into the opening within the roof of the automobile and tighten the 2 screws till they’re comfortable. Watch out to not overtighten the screws, as this might injury the antenna or the roof of the automobile.
Making ready for Antenna Substitute
Earlier than embarking on the duty of changing your antenna, it is essential to make sure you have all the mandatory instruments and put together your automobile adequately:
Collect Mandatory Instruments
-
New antenna meeting or mast
-
Socket wrench set
-
Phillips head screwdriver
-
Electrical tape
-
Antenna sealant (elective)
Put together Your Automobile
-
**Park your automobile in a well-lit and spacious space.** This may offer you ample room to work safely and effectively.
-
**Disconnect the unfavourable battery terminal.** This precaution will stop any electrical shorts or accidents whereas engaged on {the electrical} system.
-
**Take away the roof molding or trim panel.** This may increasingly require utilizing a plastic pry software to softly pry the panel unfastened. Be cautious to not injury the paint or end.
-
**Find the antenna base.** It’s sometimes located on the roof of the automobile and secured by bolts or a mounting bracket.
-
**Put together the antenna base for removing.** Clear the world across the base to take away any filth or particles. Apply a small quantity of penetrating oil or lubricant to the bolts or mounting screws to facilitate removing.
Putting in the New Antenna
With the antenna base disconnected from the passenger compartment, you at the moment are prepared to put in the brand new antenna.
1. Apply a small quantity of dielectric grease to the bottom of the brand new antenna.
2. Insert the brand new antenna into the bottom and tighten it till it’s comfortable.
3. Join the antenna wire to the antenna base.
4. **Route the antenna wire by means of the trunk and into the passenger compartment.**
To route the antenna wire by means of the trunk and into the passenger compartment, comply with these steps:
- Find the grommet the place the antenna wire passes by means of the firewall into the passenger compartment.
- Take away the grommet from the firewall.
- Feed the antenna wire by means of the grommet and into the passenger compartment.
- Reinstall the grommet within the firewall.
- Join the antenna wire to the radio.
5. Take a look at the brand new antenna to verify it’s working correctly.
| Instrument | Use |
|---|---|
| Phillips head screwdriver | To take away the antenna base |
| Dielectric grease | To lubricate the antenna base |
| Electrical tape | To safe the antenna wire |
Connecting the Antenna Wire
To attach the antenna wire, comply with these steps:
1. Find the Antenna Wire
The antenna wire is often a skinny, black wire that runs from the bottom of the antenna to the again of the radio.
2. Disconnect the Antenna Wire
Use a pair of pliers to softly pull the antenna wire connector off the again of the radio. If the connector is caught, you need to use a small screwdriver to pry it off.
3. Put together the Antenna Wire
If the antenna wire is broken, you’ll need to chop off the broken portion and strip the insulation from the ends of the wire.
4. Join the Antenna Wire
Insert the stripped ends of the antenna wire into the connector on the again of the radio. Ensure that the wires are securely fixed.
5. Take a look at the Antenna Wire
Activate the radio and examine if you’re receiving a sign. In case you are not receiving a sign, examine the connections and be sure that the antenna wire will not be broken.
6. Troubleshooting Antenna Wire Issues
In case you are having hassle connecting the antenna wire, listed below are some troubleshooting suggestions:
| Drawback | Answer |
|---|---|
| The antenna wire is broken. | Minimize off the broken portion of the wire and strip the insulation from the ends of the wire. |
| The antenna wire will not be linked securely. | Ensure that the wires are securely fixed within the connector on the again of the radio. |
| The radio will not be turned on. | Activate the radio and examine if you’re receiving a sign. |
| The antenna will not be working correctly. | Substitute the antenna. |
Testing the New Antenna
Step 1: Begin the Engine
As soon as you have changed the antenna, activate the automobile to activate the radio. Make sure the antenna is totally prolonged.
Step 2: Tune to a Station
Choose a radio station with a robust sign and pay attention for clear reception. If the sound high quality is poor or there’s static, the antenna will not be functioning appropriately.
Step 3: Modify the Antenna Place
If the sign is weak, gently alter the place of the antenna. Attempt rotating it barely or transferring it up and down to seek out the optimum reception.
Step 4: Drive Round
Take the automobile for a brief drive to check the antenna’s efficiency in numerous places. Observe if the sign energy stays constant or fluctuates.
Step 5: Park Underneath Obstacles
Park the automobile below bushes, overpasses, or in parking garages to create obstacles which will intrude with the antenna’s sign. Monitor the radio reception to see if it stays steady.
Step 6: Examine with Previous Antenna
If doable, examine the sign energy and reception high quality of the brand new antenna with the previous one. This may help you establish if the substitute has resolved the problem.
Step 7: Troubleshooting Extra Points
If the brand new antenna nonetheless fails to offer clear reception, contemplate the next doable causes:
- Unfastened or defective wiring connections
- Broken or worn-out antenna cable
- Antenna mounting base not correctly secured
- Issues with the automobile’s radio or antenna amplifier
- Exterior interference from different digital gadgets or climate circumstances
These points might require additional troubleshooting or skilled restore.
Changing Broken Wiring (if mandatory)
If the antenna wiring is broken, it’s going to must be changed. To do that:
- Disconnect the unfavourable battery terminal.
- Find the antenna wire. It’s normally situated behind the radio.
- Minimize the broken part of the wire.
- Strip the ends of the wires.
- Join the wires utilizing a wire connector.
- Reconnect the battery terminal.
Steps for Eradicating the Antenna Mast:
1. Find the antenna mast. It’s normally situated on the roof of the automobile.
2. Grip the antenna mast and unscrew it counterclockwise. Take away the antenna mast fully from the automobile.
3. Examine the antenna mast for any injury corresponding to bends, breaks, or corrosion. If there are indicators of harm, substitute the antenna mast.
4. Set up a brand new antenna mast by screwing it into the bottom clockwise.
5. Tighten the antenna mast utilizing a wrench or pliers. Don’t overtighten the antenna mast.
6. Take a look at the antenna mast to make sure that it’s working appropriately.
| Instruments Wanted |
|---|
| – Socket wrench or wrench – Screwdriver – Pliers (Non-compulsory) – New antenna mast |
Eradicating the Previous Antenna
1. Find the antenna base on the roof of your automobile.
2. Use a wrench or socket to loosen the nut that secures the antenna base.
3. Rigorously pull the antenna base straight as much as detach it from the roof.
4. Disconnect the antenna wire from the antenna base.
Putting in the New Antenna
5. Join the brand new antenna wire to the antenna base.
6. Slide the brand new antenna base over the antenna wire and into the opening within the roof.
7. Tighten the nut to safe the antenna base.
8. Prolong the brand new antenna to its full size.
Searching for Skilled Help When Wanted
Whereas changing an antenna is usually an easy activity, there are some cases the place it is advisable to hunt skilled help. Here is a desk outlining conditions when skilled assist could also be warranted:
| Scenario | Why Skilled Assistance is Wanted |
|---|---|
| Electrical points | Issues with the antenna wiring or electrical system require specialised information to diagnose and restore. |
| Troublesome entry | Antennas mounted in hard-to-reach areas or requiring particular instruments for removing might profit from skilled dealing with. |
| Broken antenna base | If the antenna base is broken, it is essential to seek the advice of an expert to make sure correct restore or substitute. |
How To Substitute Antenna 2013 Dodge Dart
Changing the antenna on a 2013 Dodge Dart is a comparatively easy activity that may be accomplished in a couple of minutes. Listed below are the steps you have to take:
- Park the automobile in a secure location and switch off the engine.
- Find the antenna on the roof of the automobile. It’s normally close to the middle of the roof.
- Gently pull the antenna straight as much as take away it from the bottom.
- Insert the brand new antenna into the bottom and tighten it by turning it clockwise.
- Take a look at the antenna by turning on the radio and checking for reception.
Folks Additionally Ask
How a lot does it price to switch an antenna on a 2013 Dodge Dart?
The price of changing an antenna on a 2013 Dodge Dart will range relying on the kind of antenna you select and the labor prices in your space. Nevertheless, you’ll be able to count on to pay between $50 and $200 for the components and labor.
How lengthy does it take to switch an antenna on a 2013 Dodge Dart?
Changing the antenna on a 2013 Dodge Dart is a comparatively fast and straightforward activity that may be accomplished in about quarter-hour.
Can I substitute the antenna on my 2013 Dodge Dart myself?
Sure, you’ll be able to substitute the antenna in your 2013 Dodge Dart your self. The method is comparatively easy and will be accomplished with a couple of fundamental instruments.
