Exuding the epitome of timekeeping prowess, the Casio G-Shock DW-6900 stands as a paragon of resilience and performance. Whether or not you are navigating treacherous terrain, conquering excessive sports activities, or just embracing the pains of on a regular basis life, this iconic timepiece is your steadfast companion. Its strong building and intuitive interface demand consideration, however setting it up would possibly look like an uncharted territory. Concern not, for this complete information will illuminate the trail, offering a simple journey into the intricacies of setting your G-Shock DW-6900.
Earlier than embarking on this endeavor, it is crucial to familiarize your self with the watch’s exterior. The left facet homes a sequence of buttons: Mode, Alter, and Ahead. The correct-side buttons, particularly Begin-Cease and Break up-Reset, will play a vital position in our time-setting mission. Now, let’s unravel step one: accessing the Timekeeping Mode. Merely press the Mode button repeatedly till the digital show showcases the present time. As soon as there, the journey actually begins.
To switch the displayed time, press and maintain the Alter button for about three seconds. The show will enter an adjustable state, with the seconds flashing. Use the Ahead button to increment the seconds, and the Break up-Reset button to decrement them. As soon as the seconds are set to your liking, press the Alter button once more to maneuver to the minutes. The identical precept applies right here: Ahead to extend, Break up-Reset to lower. Proceed this course of for the hours, guaranteeing that you simply issue within the AM/PM settings utilizing the Ahead button. Upon reaching the specified time, maintain down the Alter button for 3 seconds to verify your masterpiece and return to regular timekeeping mode. Congratulations! Your G-Shock DW-6900 is now synchronized with the ebb and stream of time.
Setting the Time
Setting the time in your G-Shock DW-6900 is a simple course of that may be accomplished in just some easy steps. Here is an in depth information on find out how to do it:
Press the MODE button repeatedly till the TIMEkeeping mode is displayed.
The TIMEkeeping mode is the default mode while you activate the watch. Should you’re at present in a special mode, press the MODE button repeatedly till the time is displayed on the display. The time will likely be displayed within the following format: HH:MM (hours:minutes).
Maintain down the ADJUST button for about 2 seconds till the time begins flashing.
When you’re within the TIMEkeeping mode, press and maintain the ADJUST button (positioned on the backside proper of the watch) for about 2 seconds. It will trigger the time to begin flashing, indicating that it is now in edit mode.
Use the FORWARD and REVERSE buttons to regulate the hours and minutes.
Whereas the time is flashing, you should utilize the FORWARD button (positioned on the prime proper of the watch) to extend the hour worth and the REVERSE button (positioned on the backside left of the watch) to lower the hour worth. To regulate the minutes, use the FORWARD button to extend the minute worth and the REVERSE button to lower the minute worth.
| Button | Operate |
|---|---|
| FORWARD | Enhance hour or minute worth |
| REVERSE | Lower hour or minute worth |
Press the ADJUST button once more to verify the brand new time.
As soon as you have set the proper time, press the ADJUST button once more to verify the adjustments. The time will cease flashing and the watch will return to regular timekeeping mode.
Adjusting the Date
Press the “Mode” button repeatedly till the “ADJ” icon seems on the show. This means that you’ve entered the regulate mode.
Use the “Ahead” and “Reverse” buttons to scroll by way of the date settings. Maintain down both button to scroll by way of the settings rapidly.
Press the “Mode” button once more to verify the brand new date settings and exit the regulate mode.
Altering the Day of the Week
The day of the week is routinely set based mostly on the date. Nonetheless, if it’s essential change it manually, observe these steps:
1. Enter the regulate mode by urgent the “Mode” button till the “ADJ” icon seems.
2. Use the “Ahead” and “Reverse” buttons to scroll to the day of the week setting.
3. Use the “Gentle” button to toggle between the times of the week.
4. Press the “Mode” button to verify the brand new settings and exit the regulate mode.
Altering the Time Zone
The G-Shock DW-6900 will be set to show the time in numerous time zones. To vary the time zone, observe these steps:
| Buttons Mixture | Operate |
|---|---|
| “Mode” + “Ahead” | +1 hour |
| “Mode” + “Reverse” | -1 hour |
Activating the Stopwatch
To activate the stopwatch, first make sure the watch is in timekeeping mode by urgent the Mode button till the timekeeping display seems. Then:
1. Enter Cease Mode
Press the Mode button as soon as to enter the cease mode.
2. Reset the Stopwatch (Non-compulsory)
If the stopwatch just isn’t already reset to zero, press the Reset button to reset it.
3. Begin the Stopwatch
Press the Begin button to begin the stopwatch. The stopwatch will begin working.
4. Break up Occasions and Cease the Stopwatch
To separate the stopwatch, press the Break up button in the course of the countdown. The watch will show the cut up time (lap time). To proceed working the stopwatch, press the Break up button once more. To cease the stopwatch, press the Cease button. The stopwatch will cease working and show the overall time.
**Extra Data:**
| Button | Operate |
|---|---|
| Begin | Begins/resumes the stopwatch |
| Cease | Stops the stopwatch |
| Reset | Resets the stopwatch to zero |
| Break up | Splits the stopwatch (lap time) |
Setting the Countdown Timer
To entry the countdown timer, press the [MODE] button repeatedly till the “TMR” mode seems on the show.
1. Set the Timer Period: Use the [ADJ] and [REV] buttons to regulate the hour (H), minute (M), and second (S) values. Press [REV] to maneuver backward by way of the values.
2. Begin the Timer: As soon as the specified time is about, press the [START/STOP] button to begin the countdown. The timer will begin counting down on the show.
3. Pause/Resume the Timer: Press the [START/STOP] button once more to pause the timer. To renew it, press the button as soon as extra.
4. Reset the Timer: To reset the timer to zero, press the [MODE] button twice to return to the “TMR” mode, after which press the [RST] button. The timer will now be reset to 00:00:00.
Superior Countdown Timer Options
The DW-6900’s countdown timer affords extra options for enhanced performance:
- Auto-Repeat: To allow auto-repeat, press the [SET] button whereas the countdown timer is working. The timer will routinely restart when it reaches zero.
- Silent Alarm: The countdown timer will be set to emit a silent alarm when it reaches zero. Press the [SET] and [ADJ] buttons concurrently to activate the silent alarm.
- Countdown Alarm: The timer can be set to set off an audible alarm when it reaches zero. Press the [SET] and [REV] buttons concurrently to activate the countdown alarm.
| Button | Operate |
|---|---|
| [START/STOP] | Begin, pause, and resume the countdown timer. |
| [ADJ] | Alter the hour, minute, and second values of the countdown timer. |
| [REV] | Reverse the adjustment of the countdown timer values. |
| [RST] | Reset the countdown timer to zero. |
| [SET] | Allow auto-repeat, silent alarm, and countdown alarm options. |
Setting the World Time
To set the world time in your G-Shock DW-6900, observe these steps:
8. Copy the Time Zone
After choosing your required time zone in step 7, maintain down the “Alter” button till “SET” seems on the show. It will copy the time zone setting to the “World Time” mode. The LCD will point out “SET” and the time zone abbreviation you chose (e.g., “LAX” for Los Angeles) to verify the profitable replace.
To confirm the world time setting, press the “Mode” button twice to change to the “World Time” mode. The show will present the time for the time zone you chose earlier. You possibly can toggle between the house time and world time by urgent the “Alter” button.
To regulate the time within the “World Time” mode, observe the identical steps outlined in step 6. Observe that altering the time within the “World Time” mode doesn’t have an effect on the house time within the “Timekeeping” mode. Urgent the “Mode” button will all the time swap again to the house time.
Extra Notes:
-The “W.TIME” indicator will seem on the show when the watch is within the “World Time” mode.
-You possibly can set as much as 4 completely different world time zones within the DW-6900.
-To clear all world time settings, enter the “World Time” mode and maintain down the “Alter” and “Reverse” buttons concurrently till “CLR” seems on the show.
-The world time characteristic makes use of a 12-hour format solely, so there is no such thing as a AM/PM indicator.
Troubleshooting Widespread Points
1. Show not working
Test the battery. If the battery is weak, substitute it with a brand new one. If the battery just isn’t the problem, strive resetting the watch by urgent the “Mode” and “Alter” buttons concurrently for 5 seconds.
2. Buttons not working
Clear the buttons with a cotton swab and rubbing alcohol. If the buttons are nonetheless not working, the watch could have to be repaired.
3. Alarm not sounding
Make sure that the alarm is turned on. If the alarm is on, test the alarm time and ensure it’s set accurately. If the alarm time is right, the watch could have to be repaired.
4. Stopwatch not working
Make sure that the stopwatch is turned on. If the stopwatch is on, test the stopwatch time and ensure it’s set accurately. If the stopwatch time is right, the watch could have to be repaired.
5. Backlight not working
Test the battery. If the battery is weak, substitute it with a brand new one. If the battery just isn’t the problem, strive resetting the watch by urgent the “Mode” and “Alter” buttons concurrently for 5 seconds.
6. Date not updating
Make sure that the date is about accurately. If the date is about accurately, the watch could have to be repaired.
7. Watch is shedding time
Test the battery. If the battery is weak, substitute it with a brand new one. If the battery just isn’t the problem, the watch could have to be repaired.
8. Watch is gaining time
Test the battery. If the battery is weak, substitute it with a brand new one. If the battery just isn’t the problem, the watch could have to be repaired.
9. Water harm
If the watch has been uncovered to water, take away the battery and dry the watch totally. If the watch doesn’t work after drying, it might have to be repaired.
10. Different points
In case you are experiencing another points along with your G-Shock DW-6900, seek the advice of the consumer guide or contact Casio buyer assist.
| Error | Answer |
|---|---|
| Show not working | Substitute battery or reset watch |
| Buttons not working | Clear buttons or restore watch |
| Alarm not sounding | Activate alarm, set alarm time accurately, or restore watch |
How To Set A G Shock DW-6900
The G-Shock DW-6900 is a well-liked digital watch that’s identified for its sturdiness and reliability. Additionally it is comparatively simple to set, as soon as you understand how to do it.
To set the time on the G-Shock DW-6900, first press the “Mode” button till the timekeeping mode is displayed. Then, press the “Alter” button to enter the setting mode. Use the “Ahead” and “Reverse” buttons to regulate the hours, minutes, and seconds.
To set the date, press the “Mode” button till the calendar mode is displayed. Then, press the “Alter” button to enter the setting mode. Use the “Ahead” and “Reverse” buttons to regulate the yr, month, and day.
To set the alarm, press the “Mode” button till the alarm mode is displayed. Then, press the “Alter” button to enter the setting mode. Use the “Ahead” and “Reverse” buttons to regulate the alarm time.
Individuals Additionally Ask About How To Set A G Shock DW-6900
How do I reset my G Shock DW-6900?
To reset your G-Shock DW-6900, first flip off the watch by urgent and holding the “Mode” button for about 3 seconds. Then, press and maintain the “Alter” button when you press the “Ahead” and “Reverse” buttons on the identical time.
How do I alter the battery in my G Shock DW-6900?
To vary the battery in your G-Shock DW-6900, you will want a small Phillips head screwdriver. First, take away the 4 screws on the again of the watch. Then, rigorously pry off the again of the watch. The battery is positioned contained in the watch, underneath a small plastic cowl. Use a small screwdriver to take away the plastic cowl after which substitute the battery.
How do I set the time on my G Shock DW-6900?
To set the time in your G-Shock DW-6900, first press the “Mode” button till the timekeeping mode is displayed. Then, press the “Alter” button to enter the setting mode. Use the “Ahead” and “Reverse” buttons to regulate the hours, minutes, and seconds.
